/*
* Copyright (C) 1997-1999 Matt Newman <matt@novadigm.com>
* some modifications:
* Copyright (C) 2000 Ajuba Solutions
* Copyright (C) 2002 ActiveState Corporation
* Copyright (C) 2004 Starfish Systems
*
* TLS (aka SSL) Channel - can be layered on any bi-directional
* Tcl_Channel (Note: Requires Trf Core Patch)
*
* This was built (almost) from scratch based upon observation of
* OpenSSL 0.9.2B
*
* Addition credit is due for Andreas Kupries (a.kupries@westend.com), for
* providing the Tcl_ReplaceChannel mechanism and working closely with me
* to enhance it to support full fileevent semantics.
*
* Also work done by the follow people provided the impetus to do this "right":
* tclSSL (Colin McCormack, Shared Technology)
* SSLtcl (Peter Antman)
*
*/
#include "tlsInt.h"
#include "tclOpts.h"
#include <stdlib.h>
/*
* External functions
*/
/*
* Forward declarations
*/
#define F2N( key, dsp) \
(((key) == NULL) ? (char *) NULL : \
Tcl_TranslateFileName(interp, (key), (dsp)))
#define REASON() ERR_reason_error_string(ERR_get_error())
static void InfoCallback _ANSI_ARGS_ ((CONST SSL *ssl, int where, int ret));
static int CiphersObjCmd _ANSI_ARGS_ ((ClientData clientData,
Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]));
static int HandshakeObjCmd _ANSI_ARGS_ ((ClientData clientData,
Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]));
static int ImportObjCmd _ANSI_ARGS_ ((ClientData clientData,
Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]));
static int StatusObjCmd _ANSI_ARGS_ ((ClientData clientData,
Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]));
static int VersionObjCmd _ANSI_ARGS_ ((ClientData clientData,
Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]));
static int MiscObjCmd _ANSI_ARGS_ ((ClientData clientData,
Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]));
static int UnimportObjCmd _ANSI_ARGS_ ((ClientData clientData,
Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]));
static SSL_CTX *CTX_Init _ANSI_ARGS_((State *statePtr, int proto, char *key,
char *cert, char *CAdir, char *CAfile, char *ciphers,
char *DHparams));
static int TlsLibInit _ANSI_ARGS_ (()) ;
#define TLS_PROTO_SSL2 0x01
#define TLS_PROTO_SSL3 0x02
#define TLS_PROTO_TLS1 0x04
#define TLS_PROTO_TLS1_1 0x08
#define TLS_PROTO_TLS1_2 0x10
#define ENABLED(flag, mask) (((flag) & (mask)) == (mask))
/*
* Static data structures
*/
#ifndef OPENSSL_NO_DH
/* code derived from output of 'openssl dhparam -C 2048' */
static unsigned char dh2048_p[]={
0xEC,0xFD,0x6F,0x66,0xD8,0xBC,0xB4,0xCB,0xD7,0xE7,0xB4,0xAE,
0xEC,0xC0,0x06,0x25,0x40,0x9F,0x3F,0xC4,0xAC,0x34,0x19,0x36,
0x8A,0xAB,0xA9,0xF6,0x45,0x36,0x87,0x1F,0x10,0x35,0x3F,0x90,
0x00,0xC6,0x7A,0xE8,0x51,0xF4,0x7F,0x50,0x0F,0xC2,0x82,0x91,
0xAD,0x60,0x1B,0x49,0xB1,0x0B,0x23,0xC3,0x37,0xAE,0x0D,0x2C,
0x49,0xC6,0xFB,0x60,0x9D,0x50,0x2F,0x8C,0x2F,0xDE,0xE6,0x5F,
0x53,0x8B,0x5F,0xF9,0x70,0x16,0xEE,0x51,0xD1,0xAB,0x02,0x48,
0x61,0xF1,0xA0,0xD7,0xBD,0x04,0x24,0xF0,0xE4,0xD1,0x0A,0x4C,
0x28,0xDC,0x22,0x78,0x7C,0xED,0x2A,0xFA,0xF4,0x57,0x7C,0xAE,
0xDF,0x52,0xC6,0xA2,0x11,0x28,0xC5,0x3B,0xB8,0x2F,0x95,0x3F,
0x1E,0x05,0x66,0xFE,0x7D,0x1A,0x73,0xA0,0x45,0xF8,0xBB,0x8C,
0x64,0xB9,0xA9,0x4D,0x23,0xBE,0x20,0x60,0xA2,0xF7,0xC7,0xD8,
0xD8,0x49,0x28,0x9A,0x81,0xAC,0xF9,0x7F,0x3C,0xFC,0xBE,0x25,
0x5B,0x1D,0xB6,0xAB,0x08,0x06,0x11,0x8D,0x94,0x69,0x3C,0x68,
0x98,0x5A,0x90,0xF8,0xEB,0x19,0xCA,0x9F,0x1C,0x50,0x96,0x53,
0xEF,0xEC,0x1B,0x93,0x4F,0x53,0xB7,0xD9,0x04,0x8E,0x48,0x99,
0x6E,0x24,0xFF,0x66,0xF5,0xB0,0xDF,0x00,0xBA,0x22,0xE2,0xB6,
0xE3,0x3A,0xC2,0x95,0xB1,0x14,0x68,0xFB,0xA5,0x37,0x22,0x78,
0x56,0x5C,0xA4,0x23,0x31,0x02,0x97,0x7D,0xA9,0x84,0x0B,0x12,
0x26,0x58,0x2F,0x86,0x10,0xAD,0xB0,0xAB,0xB9,0x7B,0x05,0x9A,
0xDE,0x11,0xF1,0xE7,0x34,0xC7,0x95,0x42,0x1C,0x4F,0xA9,0xA8,
0x92,0xDF,0x3F,0x7B,
};
static unsigned char dh2048_g[]={
0x02,
};
static DH *get_dh2048()
{
DH *dh=NULL;
if ((dh=DH_new()) == NULL) return(NULL);
dh->p=BN_bin2bn(dh2048_p,sizeof(dh2048_p),NULL);
dh->g=BN_bin2bn(dh2048_g,sizeof(dh2048_g),NULL);
if ((dh->p == NULL) || (dh->g == NULL))
return(NULL);
return(dh);
}
#endif
/*
* Defined in Tls_Init to determine what kind of channels we are using
* (old-style 8.2.0-8.3.1 or new-style 8.3.2+).
*/
int channelTypeVersion;
/*
* We lose the tcl password callback when we use the RSA BSAFE SSL-C 1.1.2
* libraries instead of the current OpenSSL libraries.
*/
#ifdef BSAFE
#define PRE_OPENSSL_0_9_4 1
#endif
/*
* Pre OpenSSL 0.9.4 Compat
*/
#ifndef STACK_OF
#define STACK_OF(x) STACK
#define sk_SSL_CIPHER_num(sk) sk_num((sk))
#define sk_SSL_CIPHER_value( sk, index) (SSL_CIPHER*)sk_value((sk), (index))
#endif
/*
* Thread-Safe TLS Code
*/
#ifdef TCL_THREADS
#define OPENSSL_THREAD_DEFINES
#include <openssl/opensslconf.h>
#ifdef OPENSSL_THREADS
#include <openssl/crypto.h>
/*
* Threaded operation requires locking callbacks
* Based from /crypto/cryptlib.c of OpenSSL and NSOpenSSL.
*/
static Tcl_Mutex locks[CRYPTO_NUM_LOCKS];
static Tcl_Mutex init_mx;
static int initialized;
static void CryptoThreadLockCallback (int mode, int n, const char *file, int line);
static unsigned long CryptoThreadIdCallback (void);
static void
CryptoThreadLockCallback(int mode, int n, const char *file, int line)
{
if (mode & CRYPTO_LOCK) {
Tcl_MutexLock(&locks[n]);
} else {
Tcl_MutexUnlock(&locks[n]);
}
}
static unsigned long
CryptoThreadIdCallback(void)
{
return (unsigned long) Tcl_GetCurrentThread();
}
#endif /* OPENSSL_THREADS */
#endif /* TCL_THREADS */
/*
*-------------------------------------------------------------------
*
* InfoCallback --
*
* monitors SSL connection process
*
* Results:
* None
*
* Side effects:
* Calls callback (if defined)
*-------------------------------------------------------------------
*/
static void
InfoCallback(CONST SSL *ssl, int where, int ret)
{
State *statePtr = (State*)SSL_get_app_data((SSL *)ssl);
Tcl_Obj *cmdPtr;
char *major; char *minor;
if (statePtr->callback == (Tcl_Obj*)NULL)
return;
cmdPtr = Tcl_DuplicateObj(statePtr->callback);
#if 0
if (where & SSL_CB_ALERT) {
sev = SSL_alert_type_string_long(ret);
if (strcmp( sev, "fatal")==0) { /* Map to error */
Tls_Error(statePtr, SSL_ERROR(ssl, 0));
return;
}
}
#endif
if (where & SSL_CB_HANDSHAKE_START) {
major = "handshake";
minor = "start";
} else if (where & SSL_CB_HANDSHAKE_DONE) {
major = "handshake";
minor = "done";
} else {
if (where & SSL_CB_ALERT) major = "alert";
else if (where & SSL_ST_CONNECT) major = "connect";
else if (where & SSL_ST_ACCEPT) major = "accept";
else major = "unknown";
if (where & SSL_CB_READ) minor = "read";
else if (where & SSL_CB_WRITE) minor = "write";
else if (where & SSL_CB_LOOP) minor = "loop";
else if (where & SSL_CB_EXIT) minor = "exit";
else minor = "unknown";
}
Tcl_ListObjAppendElement( statePtr->interp, cmdPtr,
Tcl_NewStringObj( "info", -1));
Tcl_ListObjAppendElement( statePtr->interp, cmdPtr,
Tcl_NewStringObj( Tcl_GetChannelName(statePtr->self), -1) );
Tcl_ListObjAppendElement( statePtr->interp, cmdPtr,
Tcl_NewStringObj( major, -1) );
Tcl_ListObjAppendElement( statePtr->interp, cmdPtr,
Tcl_NewStringObj( minor, -1) );
if (where & (SSL_CB_LOOP|SSL_CB_EXIT)) {
Tcl_ListObjAppendElement( statePtr->interp, cmdPtr,
Tcl_NewStringObj( SSL_state_string_long(ssl), -1) );
} else if (where & SSL_CB_ALERT) {
CONST char *cp = (char *) SSL_alert_desc_string_long(ret);
Tcl_ListObjAppendElement( statePtr->interp, cmdPtr,
Tcl_NewStringObj( cp, -1) );
} else {
Tcl_ListObjAppendElement( statePtr->interp, cmdPtr,
Tcl_NewStringObj( SSL_state_string_long(ssl), -1) );
}
Tcl_Preserve( (ClientData) statePtr->interp);
Tcl_Preserve( (ClientData) statePtr);
Tcl_IncrRefCount( cmdPtr);
(void) Tcl_EvalObjEx(statePtr->interp, cmdPtr, TCL_EVAL_GLOBAL);
Tcl_DecrRefCount( cmdPtr);
Tcl_Release( (ClientData) statePtr);
Tcl_Release( (ClientData) statePtr->interp);
}
/*
*-------------------------------------------------------------------
*
* VerifyCallback --
*
* Monitors SSL certificate validation process.
* This is called whenever a certificate is inspected
* or decided invalid.
*
* Results:
* A callback bound to the socket may return one of:
* 0 - the certificate is deemed invalid
* 1 - the certificate is deemed valid
* empty string - no change to certificate validation
*
* Side effects:
* The err field of the currently operative State is set
* to a string describing the SSL negotiation failure reason
*-------------------------------------------------------------------
*/
static int
VerifyCallback(int ok, X509_STORE_CTX *ctx)
{
Tcl_Obj *cmdPtr, *result;
char *errStr, *string;
int length;
SSL *ssl = (SSL*)X509_STORE_CTX_get_app_data(ctx);
X509 *cert = X509_STORE_CTX_get_current_cert(ctx);
State *statePtr = (State*)SSL_get_app_data(ssl);
int depth = X509_STORE_CTX_get_error_depth(ctx);
int err = X509_STORE_CTX_get_error(ctx);
dprintf(stderr, "Verify: %d\n", ok);
if (!ok) {
errStr = (char*)X509_verify_cert_error_string(err);
} else {
errStr = (char *)0;
}
if (statePtr->callback == (Tcl_Obj*)NULL) {
if (statePtr->vflags & SSL_VERIFY_FAIL_IF_NO_PEER_CERT) {
return ok;
} else {
return 1;
}
}
cmdPtr = Tcl_DuplicateObj(statePtr->callback);
Tcl_ListObjAppendElement( statePtr->interp, cmdPtr,
Tcl_NewStringObj( "verify", -1));
Tcl_ListObjAppendElement( statePtr->interp, cmdPtr,
Tcl_NewStringObj( Tcl_GetChannelName(statePtr->self), -1) );
Tcl_ListObjAppendElement( statePtr->interp, cmdPtr,
Tcl_NewIntObj( depth) );
Tcl_ListObjAppendElement( statePtr->interp, cmdPtr,
Tls_NewX509Obj( statePtr->interp, cert) );
Tcl_ListObjAppendElement( statePtr->interp, cmdPtr,
Tcl_NewIntObj( ok) );
Tcl_ListObjAppendElement( statePtr->interp, cmdPtr,
Tcl_NewStringObj( errStr ? errStr : "", -1) );
Tcl_Preserve( (ClientData) statePtr->interp);
Tcl_Preserve( (ClientData) statePtr);
statePtr->flags |= TLS_TCL_CALLBACK;
Tcl_IncrRefCount( cmdPtr);
if (Tcl_EvalObjEx(statePtr->interp, cmdPtr, TCL_EVAL_GLOBAL) != TCL_OK) {
/* It got an error - reject the certificate. */
Tcl_BackgroundError( statePtr->interp);
ok = 0;
} else {
result = Tcl_GetObjResult(statePtr->interp);
string = Tcl_GetStringFromObj(result, &length);
/* An empty result leaves verification unchanged. */
if (length > 0) {
if (Tcl_GetIntFromObj(statePtr->interp, result, &ok) != TCL_OK) {
Tcl_BackgroundError(statePtr->interp);
ok = 0;
}
}
}
Tcl_DecrRefCount( cmdPtr);
statePtr->flags &= ~(TLS_TCL_CALLBACK);
Tcl_Release( (ClientData) statePtr);
Tcl_Release( (ClientData) statePtr->interp);
return(ok); /* By default, leave verification unchanged. */
}
/*
*-------------------------------------------------------------------
*
* Tls_Error --
*
* Calls callback with $fd and $msg - so the callback can decide
* what to do with errors.
*
* Side effects:
* The err field of the currently operative State is set
* to a string describing the SSL negotiation failure reason
*-------------------------------------------------------------------
*/
void
Tls_Error(State *statePtr, char *msg)
{
Tcl_Obj *cmdPtr;
if (msg && *msg) {
Tcl_SetErrorCode(statePtr->interp, "SSL", msg, (char *)NULL);
} else {
msg = Tcl_GetStringFromObj(Tcl_GetObjResult(statePtr->interp), NULL);
}
statePtr->err = msg;
if (statePtr->callback == (Tcl_Obj*)NULL) {
char buf[BUFSIZ];
sprintf(buf, "SSL channel \"%s\": error: %s",
Tcl_GetChannelName(statePtr->self), msg);
Tcl_SetResult( statePtr->interp, buf, TCL_VOLATILE);
Tcl_BackgroundError( statePtr->interp);
return;
}
cmdPtr = Tcl_DuplicateObj(statePtr->callback);
Tcl_ListObjAppendElement(statePtr->interp, cmdPtr,
Tcl_NewStringObj("error", -1));
Tcl_ListObjAppendElement(statePtr->interp, cmdPtr,
Tcl_NewStringObj(Tcl_GetChannelName(statePtr->self), -1));
Tcl_ListObjAppendElement(statePtr->interp, cmdPtr,
Tcl_NewStringObj(msg, -1));
Tcl_Preserve((ClientData) statePtr->interp);
Tcl_Preserve((ClientData) statePtr);
Tcl_IncrRefCount(cmdPtr);
if (Tcl_EvalObjEx(statePtr->interp, cmdPtr, TCL_EVAL_GLOBAL) != TCL_OK) {
Tcl_BackgroundError(statePtr->interp);
}
Tcl_DecrRefCount(cmdPtr);
Tcl_Release((ClientData) statePtr);
Tcl_Release((ClientData) statePtr->interp);
}
/*
*-------------------------------------------------------------------
*
* PasswordCallback --
*
* Called when a password is needed to unpack RSA and PEM keys.
* Evals any bound password script and returns the result as
* the password string.
*-------------------------------------------------------------------
*/
#ifdef PRE_OPENSSL_0_9_4
/*
* No way to handle user-data therefore no way without a global
* variable to access the Tcl interpreter.
*/
static int
PasswordCallback(char *buf, int size, int verify)
{
return -1;
}
#else
static int
PasswordCallback(char *buf, int size, int verify, void *udata)
{
State *statePtr = (State *) udata;
Tcl_Interp *interp = statePtr->interp;
Tcl_Obj *cmdPtr;
int result;
if (statePtr->password == NULL) {
if (Tcl_EvalEx(interp, "tls::password", -1, TCL_EVAL_GLOBAL)
== TCL_OK) {
char *ret = (char *) Tcl_GetStringResult(interp);
strncpy(buf, ret, (size_t) size);
return (int)strlen(ret);
} else {
return -1;
}
}
cmdPtr = Tcl_DuplicateObj(statePtr->password);
Tcl_Preserve((ClientData) statePtr->interp);
Tcl_Preserve((ClientData) statePtr);
Tcl_IncrRefCount(cmdPtr);
result = Tcl_EvalObjEx(interp, cmdPtr, TCL_EVAL_GLOBAL);
if (result != TCL_OK) {
Tcl_BackgroundError(statePtr->interp);
}
Tcl_DecrRefCount(cmdPtr);
Tcl_Release((ClientData) statePtr);
Tcl_Release((ClientData) statePtr->interp);
if (result == TCL_OK) {
char *ret = (char *) Tcl_GetStringResult(interp);
strncpy(buf, ret, (size_t) size);
return (int)strlen(ret);
} else {
return -1;
}
}
#endif
/*
*-------------------------------------------------------------------
*
* CiphersObjCmd -- list available ciphers
*
* This procedure is invoked to process the "tls::ciphers" command
* to list available ciphers, based upon protocol selected.
*
* Results:
* A standard Tcl result list.
*
* Side effects:
* constructs and destroys SSL context (CTX)
*
*-------------------------------------------------------------------
*/
static int
CiphersObjCmd(clientData, interp, objc, objv)
ClientData clientData; /* Not used. */
Tcl_Interp *interp;
int objc;
Tcl_Obj *CONST objv[];
{
static CONST84 char *protocols[] = {
"ssl2", "ssl3", "tls1", "tls1.1", "tls1.2", NULL
};
enum protocol {
TLS_SSL2, TLS_SSL3, TLS_TLS1, TLS_TLS1_1, TLS_TLS1_2, TLS_NONE
};
Tcl_Obj *objPtr;
SSL_CTX *ctx = NULL;
SSL *ssl = NULL;
STACK_OF(SSL_CIPHER) *sk;
char *cp, buf[BUFSIZ];
int index, verbose = 0;
if (objc < 2 || objc > 3) {
Tcl_WrongNumArgs(interp, 1, objv, "protocol ?verbose?");
return TCL_ERROR;
}
if (Tcl_GetIndexFromObj( interp, objv[1], protocols, "protocol", 0,
&index) != TCL_OK) {
return TCL_ERROR;
}
if (objc > 2 && Tcl_GetBooleanFromObj( interp, objv[2],
&verbose) != TCL_OK) {
return TCL_ERROR;
}
switch ((enum protocol)index) {
case TLS_SSL2:
#if defined(NO_SSL2)
Tcl_AppendResult(interp, "protocol not supported", NULL);
return TCL_ERROR;
#else
ctx = SSL_CTX_new(SSLv2_method()); break;
#endif
case TLS_SSL3:
#if defined(NO_SSL3)
Tcl_AppendResult(interp, "protocol not supported", NULL);
return TCL_ERROR;
#else
ctx = SSL_CTX_new(SSLv3_method()); break;
#endif
case TLS_TLS1:
#if defined(NO_TLS1)
Tcl_AppendResult(interp, "protocol not supported", NULL);
return TCL_ERROR;
#else
ctx = SSL_CTX_new(TLSv1_method()); break;
#endif
case TLS_TLS1_1:
#if defined(NO_TLS1_1)
Tcl_AppendResult(interp, "protocol not supported", NULL);
return TCL_ERROR;
#else
ctx = SSL_CTX_new(TLSv1_1_method()); break;
#endif
case TLS_TLS1_2:
#if defined(NO_TLS1_2)
Tcl_AppendResult(interp, "protocol not supported", NULL);
return TCL_ERROR;
#else
ctx = SSL_CTX_new(TLSv1_2_method()); break;
#endif
default:
break;
}
if (ctx == NULL) {
Tcl_AppendResult(interp, REASON(), (char *) NULL);
return TCL_ERROR;
}
ssl = SSL_new(ctx);
if (ssl == NULL) {
Tcl_AppendResult(interp, REASON(), (char *) NULL);
SSL_CTX_free(ctx);
return TCL_ERROR;
}
objPtr = Tcl_NewListObj( 0, NULL);
if (!verbose) {
for (index = 0; ; index++) {
cp = (char*)SSL_get_cipher_list( ssl, index);
if (cp == NULL) break;
Tcl_ListObjAppendElement( interp, objPtr,
Tcl_NewStringObj( cp, -1) );
}
} else {
sk = SSL_get_ciphers(ssl);
for (index = 0; index < sk_SSL_CIPHER_num(sk); index++) {
register size_t i;
SSL_CIPHER_description( sk_SSL_CIPHER_value( sk, index),
buf, sizeof(buf));
for (i = strlen(buf) - 1; i ; i--) {
if (buf[i] == ' ' || buf[i] == '\n' ||
buf[i] == '\r' || buf[i] == '\t') {
buf[i] = '\0';
} else {
break;
}
}
Tcl_ListObjAppendElement( interp, objPtr,
Tcl_NewStringObj( buf, -1) );
}
}
SSL_free(ssl);
SSL_CTX_free(ctx);
Tcl_SetObjResult( interp, objPtr);
return TCL_OK;
}
/*
*-------------------------------------------------------------------
*
* HandshakeObjCmd --
*
* This command is used to verify whether the handshake is complete
* or not.
*
* Results:
* A standard Tcl result. 1 means handshake complete, 0 means pending.
*
* Side effects:
* May force SSL negotiation to take place.
*
*-------------------------------------------------------------------
*/
static int
HandshakeObjCmd(clientData, interp, objc, objv)
ClientData clientData; /* Not used. */
Tcl_Interp *interp;
int objc;
Tcl_Obj *CONST objv[];
{
Tcl_Channel chan; /* The channel to set a mode on. */
State *statePtr; /* client state for ssl socket */
int ret = 1;
if (objc != 2) {
Tcl_WrongNumArgs(interp, 1, objv, "channel");
return TCL_ERROR;
}
chan = Tcl_GetChannel(interp, Tcl_GetStringFromObj(objv[1], NULL), NULL);
if (chan == (Tcl_Channel) NULL) {
return TCL_ERROR;
}
if (channelTypeVersion == TLS_CHANNEL_VERSION_2) {
/*
* Make sure to operate on the topmost channel
*/
chan = Tcl_GetTopChannel(chan);
}
if (Tcl_GetChannelType(chan) != Tls_ChannelType()) {
Tcl_AppendResult(interp, "bad channel \"", Tcl_GetChannelName(chan),
"\": not a TLS channel", NULL);
return TCL_ERROR;
}
statePtr = (State *)Tcl_GetChannelInstanceData(chan);
if (!SSL_is_init_finished(statePtr->ssl)) {
int err;
ret = Tls_WaitForConnect(statePtr, &err);
if ((statePtr->flags & TLS_TCL_ASYNC) && err == EAGAIN) {
ret = 0;
}
if (ret < 0) {
CONST char *errStr = statePtr->err;
Tcl_ResetResult(interp);
Tcl_SetErrno(err);
if (!errStr || *errStr == 0) {
errStr = Tcl_PosixError(interp);
}
Tcl_AppendResult(interp, "handshake failed: ", errStr,
(char *) NULL);
return TCL_ERROR;
}
}
Tcl_SetObjResult(interp, Tcl_NewIntObj(ret));
return TCL_OK;
}
/*
*-------------------------------------------------------------------
*
* ImportObjCmd --
*
* This procedure is invoked to process the "ssl" command
*
* The ssl command pushes SSL over a (newly connected) tcp socket
*
* Results:
* A standard Tcl result.
*
* Side effects:
* May modify the behavior of an IO channel.
*
*-------------------------------------------------------------------
*/
static int
ImportObjCmd(clientData, interp, objc, objv)
ClientData clientData; /* Not used. */
Tcl_Interp *interp;
int objc;
Tcl_Obj *CONST objv[];
{
Tcl_Channel chan; /* The channel to set a mode on. */
State *statePtr; /* client state for ssl socket */
SSL_CTX *ctx = NULL;
Tcl_Obj *script = NULL;
Tcl_Obj *password = NULL;
int idx, len;
int flags = TLS_TCL_INIT;
int server = 0; /* is connection incoming or outgoing? */
char *key = NULL;
char *cert = NULL;
char *ciphers = NULL;
char *CAfile = NULL;
char *CAdir = NULL;
char *DHparams = NULL;
char *model = NULL;
#ifndef OPENSSL_NO_TLSEXT
char *servername = NULL; /* hostname for Server Name Indication */
#endif
#if defined(NO_SSL2)
int ssl2 = 0;
#else
int ssl2 = 1;
#endif
#if defined(NO_SSL3)
int ssl3 = 0;
#else
int ssl3 = 1;
#endif
int tls1 = 1;
int tls1_1 = 1;
int tls1_2 = 1;
int proto = 0;
int verify = 0, require = 0, request = 1;
if (objc < 2) {
Tcl_WrongNumArgs(interp, 1, objv, "channel ?options?");
return TCL_ERROR;
}
chan = Tcl_GetChannel(interp, Tcl_GetStringFromObj(objv[1], NULL), NULL);
if (chan == (Tcl_Channel) NULL) {
return TCL_ERROR;
}
if (channelTypeVersion == TLS_CHANNEL_VERSION_2) {
/*
* Make sure to operate on the topmost channel
*/
chan = Tcl_GetTopChannel(chan);
}
for (idx = 2; idx < objc; idx++) {
char *opt = Tcl_GetStringFromObj(objv[idx], NULL);
if (opt[0] != '-')
break;
OPTSTR( "-cadir", CAdir);
OPTSTR( "-cafile", CAfile);
OPTSTR( "-certfile", cert);
OPTSTR( "-cipher", ciphers);
OPTOBJ( "-command", script);
OPTSTR( "-dhparams", DHparams);
OPTSTR( "-keyfile", key);
OPTSTR( "-model", model);
OPTOBJ( "-password", password);
OPTBOOL( "-require", require);
OPTBOOL( "-request", request);
OPTBOOL( "-server", server);
#ifndef OPENSSL_NO_TLSEXT
OPTSTR( "-servername", servername);
#endif
OPTBOOL( "-ssl2", ssl2);
OPTBOOL( "-ssl3", ssl3);
OPTBOOL( "-tls1", tls1);
OPTBOOL( "-tls1.1", tls1_1);
OPTBOOL( "-tls1.2", tls1_2);
OPTBAD( "option", "-cadir, -cafile, -certfile, -cipher, -command, -dhparams, -keyfile, -model, -password, -require, -request, -server, -servername, -ssl2, -ssl3, -tls1, -tls1.1 or -tls1.2");
return TCL_ERROR;
}
if (request) verify |= SSL_VERIFY_CLIENT_ONCE | SSL_VERIFY_PEER;
if (request && require) verify |= SSL_VERIFY_FAIL_IF_NO_PEER_CERT;
if (verify == 0) verify = SSL_VERIFY_NONE;
proto |= (ssl2 ? TLS_PROTO_SSL2 : 0);
proto |= (ssl3 ? TLS_PROTO_SSL3 : 0);
proto |= (tls1 ? TLS_PROTO_TLS1 : 0);
proto |= (tls1_1 ? TLS_PROTO_TLS1_1 : 0);
proto |= (tls1_2 ? TLS_PROTO_TLS1_2 : 0);
/* reset to NULL if blank string provided */
if (cert && !*cert) cert = NULL;
if (key && !*key) key = NULL;
if (ciphers && !*ciphers) ciphers = NULL;
if (CAfile && !*CAfile) CAfile = NULL;
if (CAdir && !*CAdir) CAdir = NULL;
if (DHparams && !*DHparams) DHparams = NULL;
/* new SSL state */
statePtr = (State *) ckalloc((unsigned) sizeof(State));
memset(statePtr, 0, sizeof(State));
statePtr->flags = flags;
statePtr->interp = interp;
statePtr->vflags = verify;
statePtr->err = "";
/* allocate script */
if (script) {
(void) Tcl_GetStringFromObj(script, &len);
if (len) {
statePtr->callback = script;
Tcl_IncrRefCount(statePtr->callback);
}
}
/* allocate password */
if (password) {
(void) Tcl_GetStringFromObj(password, &len);
if (len) {
statePtr->password = password;
Tcl_IncrRefCount(statePtr->password);
}
}
if (model != NULL) {
int mode;
/* Get the "model" context */
chan = Tcl_GetChannel(interp, model, &mode);
if (chan == (Tcl_Channel) NULL) {
Tls_Free((char *) statePtr);
return TCL_ERROR;
}
if (channelTypeVersion == TLS_CHANNEL_VERSION_2) {
/*
* Make sure to operate on the topmost channel
*/
chan = Tcl_GetTopChannel(chan);
}
if (Tcl_GetChannelType(chan) != Tls_ChannelType()) {
Tcl_AppendResult(interp, "bad channel \"",
Tcl_GetChannelName(chan), "\": not a TLS channel", NULL);
Tls_Free((char *) statePtr);
return TCL_ERROR;
}
ctx = ((State *)Tcl_GetChannelInstanceData(chan))->ctx;
} else {
if ((ctx = CTX_Init(statePtr, proto, key, cert, CAdir, CAfile, ciphers,
DHparams)) == (SSL_CTX*)0) {
Tls_Free((char *) statePtr);
return TCL_ERROR;
}
}
statePtr->ctx = ctx;
/*
* We need to make sure that the channel works in binary (for the
* encryption not to get goofed up).
* We only want to adjust the buffering in pre-v2 channels, where
* each channel in the stack maintained its own buffers.
*/
Tcl_SetChannelOption(interp, chan, "-translation", "binary");
if (channelTypeVersion == TLS_CHANNEL_VERSION_1) {
Tcl_SetChannelOption(interp, chan, "-buffering", "none");
}
if (channelTypeVersion == TLS_CHANNEL_VERSION_2) {
statePtr->self = Tcl_StackChannel(interp, Tls_ChannelType(),
(ClientData) statePtr, (TCL_READABLE | TCL_WRITABLE), chan);
} else {
statePtr->self = chan;
Tcl_StackChannel(interp, Tls_ChannelType(),
(ClientData) statePtr, (TCL_READABLE | TCL_WRITABLE), chan);
}
if (statePtr->self == (Tcl_Channel) NULL) {
/*
* No use of Tcl_EventuallyFree because no possible Tcl_Preserve.
*/
Tls_Free((char *) statePtr);
return TCL_ERROR;
}
/*
* SSL Initialization
*/
statePtr->ssl = SSL_new(statePtr->ctx);
if (!statePtr->ssl) {
/* SSL library error */
Tcl_AppendResult(interp, "couldn't construct ssl session: ", REASON(),
(char *) NULL);
Tls_Free((char *) statePtr);
return TCL_ERROR;
}
#ifndef OPENSSL_NO_TLSEXT
if (servername) {
if (!SSL_set_tlsext_host_name(statePtr->ssl, servername) && require) {
Tcl_AppendResult(interp, "setting TLS host name extension failed",
(char *) NULL);
Tls_Free((char *) statePtr);
return TCL_ERROR;
}
}
#endif
/*
* SSL Callbacks
*/
SSL_set_app_data(statePtr->ssl, (VOID *)statePtr); /* point back to us */
SSL_set_verify(statePtr->ssl, verify, VerifyCallback);
SSL_CTX_set_info_callback(statePtr->ctx, InfoCallback);
/* Create Tcl_Channel BIO Handler */
statePtr->p_bio = BIO_new_tcl(statePtr, BIO_CLOSE);
statePtr->bio = BIO_new(BIO_f_ssl());
if (server) {
statePtr->flags |= TLS_TCL_SERVER;
SSL_set_accept_state(statePtr->ssl);
} else {
SSL_set_connect_state(statePtr->ssl);
}
SSL_set_bio(statePtr->ssl, statePtr->p_bio, statePtr->p_bio);
BIO_set_ssl(statePtr->bio, statePtr->ssl, BIO_NOCLOSE);
/*
* End of SSL Init
*/
Tcl_SetResult(interp, (char *) Tcl_GetChannelName(statePtr->self),
TCL_VOLATILE);
return TCL_OK;
}
/*
*-------------------------------------------------------------------
*
* UnimportObjCmd --
*
* This procedure is invoked to remove the topmost channel filter.
*
* Results:
* A standard Tcl result.
*
* Side effects:
* May modify the behavior of an IO channel.
*
*-------------------------------------------------------------------
*/
static int
UnimportObjCmd(clientData, interp, objc, objv)
ClientData clientData; /* Not used. */
Tcl_Interp *interp;
int objc;
Tcl_Obj *CONST objv[];
{
Tcl_Channel chan; /* The channel to set a mode on. */
if (objc != 2) {
Tcl_WrongNumArgs(interp, 1, objv, "channel");
return TCL_ERROR;
}
chan = Tcl_GetChannel(interp, Tcl_GetString(objv[1]), NULL);
if (chan == (Tcl_Channel) NULL) {
return TCL_ERROR;
}
if (channelTypeVersion == TLS_CHANNEL_VERSION_2) {
/*
* Make sure to operate on the topmost channel
*/
chan = Tcl_GetTopChannel(chan);
}
if (Tcl_GetChannelType(chan) != Tls_ChannelType()) {
Tcl_AppendResult(interp, "bad channel \"", Tcl_GetChannelName(chan),
"\": not a TLS channel", NULL);
return TCL_ERROR;
}
if (Tcl_UnstackChannel(interp, chan) == TCL_ERROR) {
return TCL_ERROR;
}
return TCL_OK;
}
/*
*-------------------------------------------------------------------
*
* CTX_Init -- construct a SSL_CTX instance
*
* Results:
* A valid SSL_CTX instance or NULL.
*
* Side effects:
* constructs SSL context (CTX)
*
*-------------------------------------------------------------------
*/
static SSL_CTX *
CTX_Init(statePtr, proto, key, cert, CAdir, CAfile, ciphers, DHparams)
State *statePtr;
int proto;
char *key;
char *cert;
char *CAdir;
char *CAfile;
char *ciphers;
char *DHparams;
{
Tcl_Interp *interp = statePtr->interp;
SSL_CTX *ctx = NULL;
Tcl_DString ds;
Tcl_DString ds1;
int off = 0;
const SSL_METHOD *method;
if (!proto) {
Tcl_AppendResult(interp, "no valid protocol selected", NULL);
return (SSL_CTX *)0;
}
/* create SSL context */
#if defined(NO_SSL2)
if (ENABLED(proto, TLS_PROTO_SSL2)) {
Tcl_AppendResult(interp, "protocol not supported", NULL);
return (SSL_CTX *)0;
}
#endif
#if defined(NO_SSL3)
if (ENABLED(proto, TLS_PROTO_SSL3)) {
Tcl_AppendResult(interp, "protocol not supported", NULL);
return (SSL_CTX *)0;
}
#endif
#if defined(NO_TLS1)
if (ENABLED(proto, TLS_PROTO_TLS1)) {
Tcl_AppendResult(interp, "protocol not supported", NULL);
return (SSL_CTX *)0;
}
#endif
#if defined(NO_TLS1_1)
if (ENABLED(proto, TLS_PROTO_TLS1_1)) {
Tcl_AppendResult(interp, "protocol not supported", NULL);
return (SSL_CTX *)0;
}
#endif
#if defined(NO_TLS1_2)
if (ENABLED(proto, TLS_PROTO_TLS1_2)) {
Tcl_AppendResult(interp, "protocol not supported", NULL);
return (SSL_CTX *)0;
}
#endif
switch (proto) {
#if !defined(NO_SSL2)
case TLS_PROTO_SSL2:
method = SSLv2_method ();
break;
#endif
#if !defined(NO_SSL3)
case TLS_PROTO_SSL3:
method = SSLv3_method ();
break;
#endif
#if !defined(NO_TLS1)
case TLS_PROTO_TLS1:
method = TLSv1_method ();
break;
#endif
#if !defined(NO_TLS1_1)
case TLS_PROTO_TLS1_1:
method = TLSv1_1_method ();
break;
#endif
#if !defined(NO_TLS1_2)
case TLS_PROTO_TLS1_2:
method = TLSv1_2_method ();
break;
#endif
default:
method = SSLv23_method ();
#if !defined(NO_SSL2)
off |= (ENABLED(proto, TLS_PROTO_SSL2) ? 0 : SSL_OP_NO_SSLv2);
#endif
#if !defined(NO_SSL3)
off |= (ENABLED(proto, TLS_PROTO_SSL3) ? 0 : SSL_OP_NO_SSLv3);
#endif
#if !defined(NO_TLS1)
off |= (ENABLED(proto, TLS_PROTO_TLS1) ? 0 : SSL_OP_NO_TLSv1);
#endif
#if !defined(NO_TLS1_1)
off |= (ENABLED(proto, TLS_PROTO_TLS1_1) ? 0 : SSL_OP_NO_TLSv1_1);
#endif
#if !defined(NO_TLS1_2)
off |= (ENABLED(proto, TLS_PROTO_TLS1_2) ? 0 : SSL_OP_NO_TLSv1_2);
#endif
break;
}
ctx = SSL_CTX_new (method);
SSL_CTX_set_app_data( ctx, (VOID*)interp); /* remember the interpreter */
SSL_CTX_set_options( ctx, SSL_OP_ALL); /* all SSL bug workarounds */
SSL_CTX_set_options( ctx, off); /* all SSL bug workarounds */
SSL_CTX_sess_set_cache_size( ctx, 128);
if (ciphers != NULL)
SSL_CTX_set_cipher_list(ctx, ciphers);
/* set some callbacks */
SSL_CTX_set_default_passwd_cb(ctx, PasswordCallback);
#ifndef BSAFE
SSL_CTX_set_default_passwd_cb_userdata(ctx, (void *)statePtr);
#endif
/* read a Diffie-Hellman parameters file, or use the built-in one */
#ifdef OPENSSL_NO_DH
if (DHparams != NULL) {
Tcl_AppendResult(interp,
"DH parameter support not available", (char *) NULL);
SSL_CTX_free(ctx);
return (SSL_CTX *)0;
}
#else
{
DH* dh;
if (DHparams != NULL) {
BIO *bio;
Tcl_DStringInit(&ds);
bio = BIO_new_file(F2N(DHparams, &ds), "r");
if (!bio) {
Tcl_DStringFree(&ds);
Tcl_AppendResult(interp,
"Could not find DH parameters file", (char *) NULL);
SSL_CTX_free(ctx);
return (SSL_CTX *)0;
}
dh = PEM_read_bio_DHparams(bio, NULL, NULL, NULL);
BIO_free(bio);
Tcl_DStringFree(&ds);
if (!dh) {
Tcl_AppendResult(interp,
"Could not read DH parameters from file", (char *) NULL);
SSL_CTX_free(ctx);
return (SSL_CTX *)0;
}
} else {
dh = get_dh2048();
}
SSL_CTX_set_tmp_dh(ctx, dh);
DH_free(dh);
}
#endif
/* set our certificate */
if (cert != NULL) {
Tcl_DStringInit(&ds);
if (SSL_CTX_use_certificate_file(ctx, F2N( cert, &ds),
SSL_FILETYPE_PEM) <= 0) {
Tcl_DStringFree(&ds);
Tcl_AppendResult(interp,
"unable to set certificate file ", cert, ": ",
REASON(), (char *) NULL);
SSL_CTX_free(ctx);
return (SSL_CTX *)0;
}
/* get the private key associated with this certificate */
if (key == NULL) key=cert;
if (SSL_CTX_use_PrivateKey_file(ctx, F2N( key, &ds),
SSL_FILETYPE_PEM) <= 0) {
Tcl_DStringFree(&ds);
/* flush the passphrase which might be left in the result */
Tcl_SetResult(interp, NULL, TCL_STATIC);
Tcl_AppendResult(interp,
"unable to set public key file ", key, " ",
REASON(), (char *) NULL);
SSL_CTX_free(ctx);
return (SSL_CTX *)0;
}
Tcl_DStringFree(&ds);
/* Now we know that a key and cert have been set against
* the SSL context */
if (!SSL_CTX_check_private_key(ctx)) {
Tcl_AppendResult(interp,
"private key does not match the certificate public key",
(char *) NULL);
SSL_CTX_free(ctx);
return (SSL_CTX *)0;
}
} else {
cert = (char*)X509_get_default_cert_file();
if (SSL_CTX_use_certificate_file(ctx, cert,
SSL_FILETYPE_PEM) <= 0) {
#if 0
Tcl_DStringFree(&ds);
Tcl_AppendResult(interp,
"unable to use default certificate file ", cert, ": ",
REASON(), (char *) NULL);
SSL_CTX_free(ctx);
return (SSL_CTX *)0;
#endif
}
}
Tcl_DStringInit(&ds);
Tcl_DStringInit(&ds1);
if (!SSL_CTX_load_verify_locations(ctx, F2N(CAfile, &ds), F2N(CAdir, &ds1)) ||
!SSL_CTX_set_default_verify_paths(ctx)) {
#if 0
Tcl_DStringFree(&ds);
Tcl_DStringFree(&ds1);
/* Don't currently care if this fails */
Tcl_AppendResult(interp, "SSL default verify paths: ",
REASON(), (char *) NULL);
SSL_CTX_free(ctx);
return (SSL_CTX *)0;
#endif
}
/* https://sourceforge.net/p/tls/bugs/57/ */
if ( CAfile != NULL ) {
STACK_OF(X509_NAME) *certNames = SSL_load_client_CA_file( F2N(CAfile, &ds) );
if ( certNames != NULL ) {
SSL_CTX_set_client_CA_list(ctx, certNames );
}
}
Tcl_DStringFree(&ds);
Tcl_DStringFree(&ds1);
return ctx;
}
/*
*-------------------------------------------------------------------
*
* StatusObjCmd -- return certificate for connected peer.
*
* Results:
* A standard Tcl result.
*
* Side effects:
* None.
*
*-------------------------------------------------------------------
*/
static int
StatusObjCmd(clientData, interp, objc, objv)
ClientData clientData; /* Not used. */
Tcl_Interp *interp;
int objc;
Tcl_Obj *CONST objv[];
{
State *statePtr;
X509 *peer;
Tcl_Obj *objPtr;
Tcl_Channel chan;
char *channelName, *ciphers;
int mode;
switch (objc) {
case 2:
channelName = Tcl_GetStringFromObj(objv[1], NULL);
break;
case 3:
if (!strcmp (Tcl_GetString (objv[1]), "-local")) {
channelName = Tcl_GetStringFromObj(objv[2], NULL);
break;
}
/* else fall... */
default:
Tcl_WrongNumArgs(interp, 1, objv, "?-local? channel");
return TCL_ERROR;
}
chan = Tcl_GetChannel(interp, channelName, &mode);
if (chan == (Tcl_Channel) NULL) {
return TCL_ERROR;
}
if (channelTypeVersion == TLS_CHANNEL_VERSION_2) {
/*
* Make sure to operate on the topmost channel
*/
chan = Tcl_GetTopChannel(chan);
}
if (Tcl_GetChannelType(chan) != Tls_ChannelType()) {
Tcl_AppendResult(interp, "bad channel \"", Tcl_GetChannelName(chan),
"\": not a TLS channel", NULL);
return TCL_ERROR;
}
statePtr = (State *) Tcl_GetChannelInstanceData(chan);
if (objc == 2) {
peer = SSL_get_peer_certificate(statePtr->ssl);
} else {
peer = SSL_get_certificate(statePtr->ssl);
}
if (peer) {
objPtr = Tls_NewX509Obj(interp, peer);
if (objc == 2) { X509_free(peer); }
} else {
objPtr = Tcl_NewListObj(0, NULL);
}
Tcl_ListObjAppendElement (interp, objPtr,
Tcl_NewStringObj ("sbits", -1));
Tcl_ListObjAppendElement (interp, objPtr,
Tcl_NewIntObj (SSL_get_cipher_bits (statePtr->ssl, NULL)));
ciphers = (char*)SSL_get_cipher(statePtr->ssl);
if (ciphers != NULL && strcmp(ciphers, "(NONE)")!=0) {
Tcl_ListObjAppendElement(interp, objPtr,
Tcl_NewStringObj("cipher", -1));
Tcl_ListObjAppendElement(interp, objPtr,
Tcl_NewStringObj(SSL_get_cipher(statePtr->ssl), -1));
}
Tcl_SetObjResult( interp, objPtr);
return TCL_OK;
}
/*
*-------------------------------------------------------------------
*
* VersionObjCmd -- return version string from OpenSSL.
*
* Results:
* A standard Tcl result.
*
* Side effects:
* None.
*
*-------------------------------------------------------------------
*/
static int
VersionObjCmd(clientData, interp, objc, objv)
ClientData clientData; /* Not used. */
Tcl_Interp *interp;
int objc;
Tcl_Obj *CONST objv[];
{
Tcl_Obj *objPtr;
objPtr = Tcl_NewStringObj(OPENSSL_VERSION_TEXT, -1);
Tcl_SetObjResult(interp, objPtr);
return TCL_OK;
}
/*
*-------------------------------------------------------------------
*
* MiscObjCmd -- misc commands
*
* Results:
* A standard Tcl result.
*
* Side effects:
* None.
*
*-------------------------------------------------------------------
*/
static int
MiscObjCmd(clientData, interp, objc, objv)
ClientData clientData; /* Not used. */
Tcl_Interp *interp;
int objc;
Tcl_Obj *CONST objv[];
{
static CONST84 char *commands [] = { "req", NULL };
enum command { C_REQ, C_DUMMY };
int cmd;
if (objc < 2) {
Tcl_WrongNumArgs(interp, 1, objv, "subcommand ?args?");
return TCL_ERROR;
}
if (Tcl_GetIndexFromObj(interp, objv[1], commands,
"command", 0,&cmd) != TCL_OK) {
return TCL_ERROR;
}
switch ((enum command) cmd) {
case C_REQ: {
EVP_PKEY *pkey=NULL;
X509 *cert=NULL;
X509_NAME *name=NULL;
Tcl_Obj **listv;
int listc,i;
BIO *out=NULL;
char *k_C="",*k_ST="",*k_L="",*k_O="",*k_OU="",*k_CN="",*k_Email="";
char *keyout,*pemout,*str;
int keysize,serial=0,days=365;
if ((objc<5) || (objc>6)) {
Tcl_WrongNumArgs(interp, 2, objv, "keysize keyfile certfile ?info?");
return TCL_ERROR;
}
if (Tcl_GetIntFromObj(interp, objv[2], &keysize) != TCL_OK) {
return TCL_ERROR;
}
keyout=Tcl_GetString(objv[3]);
pemout=Tcl_GetString(objv[4]);
if (objc>=6) {
if (Tcl_ListObjGetElements(interp, objv[5],
&listc, &listv) != TCL_OK) {
return TCL_ERROR;
}
if ((listc%2) != 0) {
Tcl_SetResult(interp,"Information list must have even number of arguments",NULL);
return TCL_ERROR;
}
for (i=0; i<listc; i+=2) {
str=Tcl_GetString(listv[i]);
if (strcmp(str,"days")==0) {
if (Tcl_GetIntFromObj(interp,listv[i+1],&days)!=TCL_OK)
return TCL_ERROR;
} else if (strcmp(str,"serial")==0) {
if (Tcl_GetIntFromObj(interp,listv[i+1],&serial)!=TCL_OK)
return TCL_ERROR;
} else if (strcmp(str,"serial")==0) {
if (Tcl_GetIntFromObj(interp,listv[i+1],&serial)!=TCL_OK)
return TCL_ERROR;
} else if (strcmp(str,"C")==0) {
k_C=Tcl_GetString(listv[i+1]);
} else if (strcmp(str,"ST")==0) {
k_ST=Tcl_GetString(listv[i+1]);
} else if (strcmp(str,"L")==0) {
k_L=Tcl_GetString(listv[i+1]);
} else if (strcmp(str,"O")==0) {
k_O=Tcl_GetString(listv[i+1]);
} else if (strcmp(str,"OU")==0) {
k_OU=Tcl_GetString(listv[i+1]);
} else if (strcmp(str,"CN")==0) {
k_CN=Tcl_GetString(listv[i+1]);
} else if (strcmp(str,"Email")==0) {
k_Email=Tcl_GetString(listv[i+1]);
} else {
Tcl_SetResult(interp,"Unknown parameter",NULL);
return TCL_ERROR;
}
}
}
if ((pkey = EVP_PKEY_new()) != NULL) {
if (!EVP_PKEY_assign_RSA(pkey,
RSA_generate_key(keysize, 0x10001, NULL, NULL))) {
Tcl_SetResult(interp,"Error generating private key",NULL);
EVP_PKEY_free(pkey);
return TCL_ERROR;
}
out=BIO_new(BIO_s_file());
BIO_write_filename(out,keyout);
PEM_write_bio_PrivateKey(out,pkey,NULL,NULL,0,NULL,NULL);
BIO_free_all(out);
if ((cert=X509_new())==NULL) {
Tcl_SetResult(interp,"Error generating certificate request",NULL);
EVP_PKEY_free(pkey);
return(TCL_ERROR);
}
X509_set_version(cert,2);
ASN1_INTEGER_set(X509_get_serialNumber(cert),serial);
X509_gmtime_adj(X509_get_notBefore(cert),0);
X509_gmtime_adj(X509_get_notAfter(cert),(long)60*60*24*days);
X509_set_pubkey(cert,pkey);
name=X509_get_subject_name(cert);
X509_NAME_add_entry_by_txt(name,"C", MBSTRING_ASC, k_C, -1, -1, 0);
X509_NAME_add_entry_by_txt(name,"ST", MBSTRING_ASC, k_ST, -1, -1, 0);
X509_NAME_add_entry_by_txt(name,"L", MBSTRING_ASC, k_L, -1, -1, 0);
X509_NAME_add_entry_by_txt(name,"O", MBSTRING_ASC, k_O, -1, -1, 0);
X509_NAME_add_entry_by_txt(name,"OU", MBSTRING_ASC, k_OU, -1, -1, 0);
X509_NAME_add_entry_by_txt(name,"CN", MBSTRING_ASC, k_CN, -1, -1, 0);
X509_NAME_add_entry_by_txt(name,"Email", MBSTRING_ASC, k_Email, -1, -1, 0);
X509_set_subject_name(cert,name);
if (!X509_sign(cert,pkey,EVP_md5())) {
X509_free(cert);
EVP_PKEY_free(pkey);
Tcl_SetResult(interp,"Error signing certificate",NULL);
return TCL_ERROR;
}
out=BIO_new(BIO_s_file());
BIO_write_filename(out,pemout);
PEM_write_bio_X509(out,cert);
BIO_free_all(out);
X509_free(cert);
EVP_PKEY_free(pkey);
} else {
Tcl_SetResult(interp,"Error generating private key",NULL);
return TCL_ERROR;
}
}
break;
default:
break;
}
return TCL_OK;
}
/*
*-------------------------------------------------------------------
*
* Tls_Free --
*
* This procedure cleans up when a SSL socket based channel
* is closed and its reference count falls below 1
*
* Results:
* none
*
* Side effects:
* Frees all the state
*
*-------------------------------------------------------------------
*/
void
Tls_Free( char *blockPtr )
{
State *statePtr = (State *)blockPtr;
Tls_Clean(statePtr);
ckfree(blockPtr);
}
/*
*-------------------------------------------------------------------
*
* Tls_Clean --
*
* This procedure cleans up when a SSL socket based channel
* is closed and its reference count falls below 1. This should
* be called synchronously by the CloseProc, not in the
* EventuallyFree callback.
*
* Results:
* none
*
* Side effects:
* Frees all the state
*
*-------------------------------------------------------------------
*/
void
Tls_Clean(State *statePtr)
{
/*
* we're assuming here that we're single-threaded
*/
if (statePtr->timer != (Tcl_TimerToken) NULL) {
Tcl_DeleteTimerHandler(statePtr->timer);
statePtr->timer = NULL;
}
if (statePtr->bio) {
/* This will call SSL_shutdown. Bug 1414045 */
dprintf(stderr, "BIO_free_all(%p)\n", statePtr->bio);
BIO_free_all(statePtr->bio);
statePtr->bio = NULL;
}
if (statePtr->ssl) {
dprintf(stderr, "SSL_free(%p)\n", statePtr->ssl);
SSL_free(statePtr->ssl);
statePtr->ssl = NULL;
}
if (statePtr->ctx) {
SSL_CTX_free(statePtr->ctx);
statePtr->ctx = NULL;
}
if (statePtr->callback) {
Tcl_DecrRefCount(statePtr->callback);
statePtr->callback = NULL;
}
if (statePtr->password) {
Tcl_DecrRefCount(statePtr->password);
statePtr->password = NULL;
}
}
/*
*-------------------------------------------------------------------
*
* Tls_Init --
*
* This is a package initialization procedure, which is called
* by Tcl when this package is to be added to an interpreter.
*
* Results: Ssl configured and loaded
*
* Side effects:
* create the ssl command, initialise ssl context
*
*-------------------------------------------------------------------
*/
int
Tls_Init(Tcl_Interp *interp) /* Interpreter in which the package is
* to be made available. */
{
const unsigned char tlsTclInitScript[] = {
#include "tls.tcl.h"
};
int major, minor, patchlevel, release;
/*
* The original 8.2.0 stacked channel implementation (and the patch
* that preceded it) had problems with scalability and robustness.
* These were address in 8.3.2 / 8.4a2, so we now require that as a
* minimum for TLS 1.4+. We only support 8.2+ now (8.3.2+ preferred).
*/
if (
#ifdef USE_TCL_STUBS
Tcl_InitStubs(interp, "8.2", 0)
#else
Tcl_PkgRequire(interp, "Tcl", "8.2", 0)
#endif
== NULL) {
return TCL_ERROR;
}
/*
* Get the version so we can runtime switch on available functionality.
* TLS should really only be used in 8.3.2+, but the other works for
* some limited functionality, so an attempt at support is made.
*/
Tcl_GetVersion(&major, &minor, &patchlevel, &release);
if ((major > 8) || ((major == 8) && ((minor > 3) || ((minor == 3) &&
(release == TCL_FINAL_RELEASE) && (patchlevel >= 2))))) {
/* 8.3.2+ */
channelTypeVersion = TLS_CHANNEL_VERSION_2;
} else {
/* 8.2.0 - 8.3.1 */
channelTypeVersion = TLS_CHANNEL_VERSION_1;
}
if (TlsLibInit() != TCL_OK) {
Tcl_AppendResult(interp, "could not initialize SSL library", NULL);
return TCL_ERROR;
}
Tcl_CreateObjCommand(interp, "tls::ciphers", CiphersObjCmd,
(ClientData) 0, (Tcl_CmdDeleteProc *) NULL);
Tcl_CreateObjCommand(interp, "tls::handshake", HandshakeObjCmd,
(ClientData) 0, (Tcl_CmdDeleteProc *) NULL);
Tcl_CreateObjCommand(interp, "tls::import", ImportObjCmd,
(ClientData) 0, (Tcl_CmdDeleteProc *) NULL);
Tcl_CreateObjCommand(interp, "tls::unimport", UnimportObjCmd,
(ClientData) 0, (Tcl_CmdDeleteProc *) NULL);
Tcl_CreateObjCommand(interp, "tls::status", StatusObjCmd,
(ClientData) 0, (Tcl_CmdDeleteProc *) NULL);
Tcl_CreateObjCommand(interp, "tls::version", VersionObjCmd,
(ClientData) 0, (Tcl_CmdDeleteProc *) NULL);
Tcl_CreateObjCommand(interp, "tls::misc", MiscObjCmd,
(ClientData) 0, (Tcl_CmdDeleteProc *) NULL);
if (interp) {
Tcl_Eval(interp, tlsTclInitScript);
}
return Tcl_PkgProvide(interp, PACKAGE_NAME, PACKAGE_VERSION);
}
/*
*------------------------------------------------------*
*
* Tls_SafeInit --
*
* ------------------------------------------------*
* Standard procedure required by 'load'.
* Initializes this extension for a safe interpreter.
* ------------------------------------------------*
*
* Sideeffects:
* As of 'Tls_Init'
*
* Result:
* A standard Tcl error code.
*
*------------------------------------------------------*
*/
int
Tls_SafeInit (Tcl_Interp* interp)
{
return Tls_Init (interp);
}
/*
*------------------------------------------------------*
*
* TlsLibInit --
*
* ------------------------------------------------*
* Initializes SSL library once per application
* ------------------------------------------------*
*
* Side effects:
* initilizes SSL library
*
* Result:
* none
*
*------------------------------------------------------*
*/
static int
TlsLibInit ()
{
int i;
char rnd_seed[16] = "GrzSlplKqUdnnzP!"; /* 16 bytes */
int status=TCL_OK;
#if defined(OPENSSL_THREADS) && defined(TCL_THREADS)
size_t num_locks;
if (initialized) {
return status;
}
Tcl_MutexLock(&init_mx);
if (!initialized) {
initialized = 1;
#else
{
#endif
if (CRYPTO_set_mem_functions((void *(*)(size_t))Tcl_Alloc,
(void *(*)(void *, size_t))Tcl_Realloc,
(void(*)(void *))Tcl_Free) == 0) {
/* Not using Tcl's mem functions ... not critical */
}
#if defined(OPENSSL_THREADS) && defined(TCL_THREADS)
/* should we consider allocating mutexes? */
num_locks = CRYPTO_num_locks();
if (num_locks > CRYPTO_NUM_LOCKS) {
status=TCL_ERROR;
goto done;
}
CRYPTO_set_locking_callback(CryptoThreadLockCallback);
CRYPTO_set_id_callback(CryptoThreadIdCallback);
#endif
if (SSL_library_init() != 1) {
status=TCL_ERROR;
goto done;
}
SSL_load_error_strings();
ERR_load_crypto_strings();
/*
* Seed the random number generator in the SSL library,
* using the do/while construct because of the bug note in the
* OpenSSL FAQ at http://www.openssl.org/support/faq.html#USER1
*
* The crux of the problem is that Solaris 7 does not have a
* /dev/random or /dev/urandom device so it cannot gather enough
* entropy from the RAND_seed() when TLS initializes and refuses
* to go further. Earlier versions of OpenSSL carried on regardless.
*/
srand((unsigned int) time((time_t *) NULL));
do {
for (i = 0; i < 16; i++) {
rnd_seed[i] = 1 + (char) (255.0 * rand()/(RAND_MAX+1.0));
}
RAND_seed(rnd_seed, sizeof(rnd_seed));
} while (RAND_status() != 1);
}
done:
#if defined(OPENSSL_THREADS) && defined(TCL_THREADS)
Tcl_MutexUnlock(&init_mx);
#endif
return status;
}
Documentation