<dt><strong>num_extensions</strong> <em>n</em></dt>
	<dd>Number of certificate extensions.</dd>
	<dt><strong>extensions</strong> <em>list</em></dt>
	<dd>List of certificate extension names.</dd>
	<dt><strong>authorityKeyIdentifier</strong> <em>string</em></dt>
	<dd>(AKI) Key identifier of the Issuing CA certificate that signed
	    the SSL certificate. This value matches the SKI value of the
	    Intermediate CA certificate.</dd>
	    the SSL certificate as hex string. This value matches the SKI
	    value of the Intermediate CA certificate.</dd>
	<dt><strong>subjectKeyIdentifier</strong> <em>string</em></dt>
	<dd>(SKI) Hash of the public key inside the certificate. Used to
	   identify certificates that contain a particular public key.</dd>
	<dd>(SKI) Hash of the public key inside the certificate as hex
	   string. Used to identify certificates that contain a particular
	   public key.</dd>
	<dt><strong>subjectAltName</strong> <em>list</em></dt>
	<dd>List of all of the alternative domain names, sub domains,
	    and IP addresses that are secured by the certificate.</dd>
	<dt><strong>ocsp</strong> <em>list</em></dt>
	<dd>List of all OCSP URLs.</dd>
	<dd>List of all Online Certificate Status Protocol (OCSP) URLs.</dd>

	<dt><strong>certificate</strong> <em>cert</em></dt>
	<dd>The PEM encoded certificate.</dd>

	<dt><strong>signatureAlgorithm</strong> <em>algorithm</em></dt>
	<dd>Cipher algorithm used for certificate signature.</dd>
	<dt><strong>signatureValue</strong> <em>string</em></dt>

	<dt><strong>state</strong> <em>state</em></dt>
	<dd>State of the connection.</dd>
	<dt><strong>servername</strong> <em>name</em></dt>
	<dd>The name of the connected to server.</dd>
	<dt><strong>protocol</strong> <em>version</em></dt>
	<dd>The protocol version used for the connection:
	    SSL2, SSL3, TLS1, TLS1.1, TLS1.2, TLS1.3, or unknown.</dd>
	<dt><strong>renegotiation</strong> <em>state</em></dt>
	<dt><strong>renegotiation</strong> <em>boolean</em></dt>
	<dd>Whether protocol renegotiation is supported or not.</dd>
	<dt><strong>securitylevel</strong> <em>level</em></dt>
	<dd>The security level used for selection of ciphers, key size, etc.</dd>
	<dt><strong>session_reused</strong> <em>boolean</em></dt>
	<dd>Whether the session has been reused or not.</dd>
	<dt><strong>is_server</strong> <em>boolean</em></dt>
	<dd>Whether the connection configured as a server or client (false).</dd>
	<dd>Whether the connection is configured as a server (1) or client (0).</dd>
	<dt><strong>compression</strong> <em>mode</em></dt>
	<dd>Compression method.</dd>
	<dt><strong>expansion</strong> <em>mode</em></dt>
	<dd>Expansion method.</dd>
    </dl>
</blockquote>
<blockquote>

	<dd>Can the session be resumed or not.</dd>
	<dt><strong>start_time</strong> <em>seconds</em></dt>
	<dd>Time since session started in seconds since epoch.</dd>
	<dt><strong>timeout</strong> <em>seconds</em></dt>
	<dd>Max duration of session in seconds before time-out.</dd>
	<dt><strong>lifetime</strong> <em>seconds</em></dt>
	<dd>Session ticket lifetime hint in seconds.</dd>
	<dt><strong>session_id</strong> <em>string</em></dt>
	<dt><strong>session_id</strong> <em>binary_string</em></dt>
	<dd>Unique session id for use in resuming the session.</dd>
	<dt><strong>session_ticket</strong> <em>string</em></dt>
	<dt><strong>session_ticket</strong> <em>binary_string</em></dt>
	<dd>Unique session ticket for use in resuming the session.</dd>
	<dt><strong>ticket_app_data</strong> <em>string</em></dt>
	<dt><strong>ticket_app_data</strong> <em>binary_string</em></dt>
	<dd>Unique session ticket application data.</dd>
	<dt><strong>master_key</strong> <em>binary_string</em></dt>
	<dd>Unique session master key.</dd>
	<dt><strong>session_cache_mode</strong> <em>mode</em></dt>
	<dd>Server cache mode (client, server, or both).</dd>
    </dl>
</blockquote>

</dl>

<h3><a name="CALLBACK OPTIONS">CALLBACK OPTIONS</a></h3>

<p>
As indicated above, individual channels can be given their own callbacks
to handle intermediate processing by the OpenSSL library, using the
<strong>-command</strong>, <strong>-password</strong>, and
<em>-command</em> and <em>-password</em> options passed to either of
<strong>-validate_command</strong> options passed to either of
<strong>tls::socket</strong> or <strong>tls::import</strong>.
</p>

<blockquote>
<dl>

    <dt><strong>-command</strong> <em>callback</em></dt>

	<dd>
	  This form of callback is invoked by the OpenSSL function
	  <code>SSL_CTX_sess_set_new_cb()</code>.
	  Where <em>session_id</em> is the current session identifier,
	  <em>ticket</em> is the session ticket info, and <em>lifetime</em>
	  is the the ticket lifetime in seconds.
	</dd>

	<br>
	</dl>
    </dd>

    <br>

    <dt><strong>-password</strong> <em>callback</em></dt>
    <dd>
	Invokes the specified <em>callback</em> script when OpenSSL needs to
	obtain a password.  The callback should return the password as a string.
	No arguments are appended to the script upon callback.
    </dd>

    <br>


    <dt><strong>-validatecommand</strong> <em>callback</em></dt>
    <dd>
	Invokes the specified <em>callback</em> script during handshake in
	order to verify/validate the provided value. 
	order to validate the provided value(s). 
	To reject the value and abort connection, the callback should return 0.
	To accept the value, it should return 1.  To reject the value, but
	continue the connection, it should return 2.

	<br>
	<br>

	<dl>

	<dt>
	  <strong>alpn</strong> <em>protocol</em>
	</dt>
	<dd>
	  For servers, this form of callback is invoked when the client ALPN
	  header is received and the first <b>-alpn</b> specified protocol common
	  extension is received and the first <b>-alpn</b> specified protocol common
	  to the both the client and server is selected. If none, the first
	  client specified protocol is used.
	</dd>

	<br>

	<dt>
	  <strong>hello</strong> <em>servername</em>
	</dt>
	<dd>
	  For servers, this form of callback is invoked during client hello
	  message processing. Used to select an appropriate certificate to
	  message processing. It is used to select an appropriate certificate to
	  present, and make other configuration adjustments relevant to that
	  server name and its configuration. Called before SNI and ALPN callbacks.
	</dd>

	<br>

	<dt>
	  <strong>sni</strong> <em>servername</em>
	</dt>
	<dd>
	  For servers, this form of callback is invoked when the SNI header
	  For servers, this form of callback is invoked when the SNI extension
	  from the client is received. Where <i>servername</i> is the client
	  specified servername. This is used when a server supports multiple
	  from the client is received. This is used when a server supports multiple
	  names, so the right certificate can be used. Called after hello
	  callback but before ALPN callback.
	</dd>

	<br>

	<dt>

	  <li>The <em>status</em> argument is an boolean representing the
	  validity of the current certificate.
	  A value of <code>0</code> means the certificate is deemed invalid.
	  A value of <code>1</code> means the certificate is deemed valid.</li>
	  <li>The <em>error</em> argument supplies the message, if any, generated
	  by <code>X509_STORE_CTX_get_error()</code>.</li>
	  </ul>
	  <br>
	  <br>
	  The callback may override normal validation processing by explicitly
	  returning one of the above <em>status</em> values.
	</dd>
	<br>
	</dl>
    </dd>
</dl>
</blockquote>

<p>
Reference implementations of these callbacks are provided in the
distribution as <strong>tls::callback</strong> and
<strong>tls::password</strong> respectively.  Note that these are
distribution as <strong>tls::callback</strong>, <strong>tls::password</strong>,
and <strong>tls::validate_command</strong> respectively.  Note that these are
<em>sample</em> implementations only.  In a more realistic deployment
you would specify your own callback scripts on each TLS channel
using the <em>-command</em> and <em>-password</em> options.
you would specify your own callback scripts on each TLS channel using the
<strong>-command</strong>, <strong>-password</strong>, and <strong>-validate_command</strong> options.
</p>

<p>
The default behavior when the <em>-command</em> option is not specified is for
TLS to process the associated library callbacks internally.
The default behavior when the <em>-password</em> option is not specified is for
TLS to process the associated library callbacks by attempting to call
<strong>tls::password</strong>.
The default behavior when the <strong>-command</strong> and <strong>-validate_command</strong>
options are not specified is for TLS to process the associated library callbacks
internally. The default behavior when the <strong>-password</strong> option is not
specified is for TLS to process the associated library callbacks by attempting
to call <strong>tls::password</strong>.
The difference between these two behaviors is a consequence of maintaining
compatibility with earlier implementations.
</p>

<p>
The <strong>tls::debug</strong> variable provides some additional
control over these reference callbacks.  Its value is zero by default.
Higher values produce more diagnostic output, and will also force the
verify method in <strong>tls::callback</strong> to accept the
certificate, even when it is invalid.
</p>

<p>
<em>
The use of the reference callbacks <strong>tls::callback</strong> and
<strong>tls::password</strong> is not recommended.  They may be removed
from future releases.
The use of the reference callbacks <strong>tls::callback</strong>,
<strong>tls::password</strong>, and <strong>tls::validate_command</strong>
is not recommended.  They may be removed from future releases.
</em>
</p>

<p>
<em>
The use of the variable <strong>tls::debug</strong> is not recommended.
It may be removed from future releases.
</em>
</p>

<h3><a name="DEBUG">DEBUG</a></h3>

TLS key logging can be enabled by setting the environment variable
<b>SSLKEYLOGFILE</b> to the name of the file to log to. Then whenever TLS
key material is generated or received it will be logged to the file.
key material is generated or received it will be logged to the file. This
is useful for logging key data for network logging tools to use to
decrypt the data.

<h3><a name="HTTPS EXAMPLE">HTTPS EXAMPLE</a></h3>

<p>This example uses a sample server.pem provided with the TLS release,
courtesy of the <strong>OpenSSL</strong> project.</p>

<pre><code>
package require http
package require tls

http::register https 443 [list ::tls::socket -autoservername true -require true -cadir /etc/ssl/certs]

set tok [http::geturl https://www.tcl.tk/]
</code></pre>

<h3><a name="SPECIAL CONSIDERATIONS">SPECIAL CONSIDERATIONS</a></h3>

<p>The capabilities of this package can vary enormously based
upon how your OpenSSL library was configured and built. At the
most macro-level OpenSSL supports a &quot;no patents&quot; build,
which disables RSA, IDEA, RC(2,4,5) and SSL2 - if your OpenSSL is
<p>The capabilities of this package can vary enormously based upon how your
OpenSSL library was configured and built. New versions may obsolete older
protocol versions, add or remove ciphers, change default values, etc. Use the
<strong>tls::ciphers</strong> and <strong>tls::protocols</strong> commands to
configured this way then you will need to build TLS with the
-DNO_PATENTS option - and the resultant module will function
correctly and also support ADH certificate-less encryption,
however you will be unable to utilize this to speak to normal Web
Servers, which typically require RSA support. Please see <a
href="http://www.openssl.org/">http://www.openssl.org/</a> for
more information on the whole issue of patents and US export
restrictions. </p>
obtain the supported versions.</p>

<h3><a name="SEE ALSO">SEE ALSO</a></h3>

<p><strong>socket</strong>, <strong>fileevent, </strong><a
href="http://www.openssl.org/"><strong>OpenSSL</strong></a></p>

<hr>

static Tcl_Mutex *locks = NULL;
static int locksCount = 0;
static Tcl_Mutex init_mx;
#endif /* OPENSSL_THREADS */
#endif /* TCL_THREADS */


/********************/
/* Callbacks        */
/********************/


/*
 *-------------------------------------------------------------------
 *
 * Eval Callback Command --
 *
 *	Eval callback command and catch any errors
 *

 *	monitors SSL connection process
 *
 * Results:
 *	None
 *
 * Side effects:
 *	Calls callback (if defined)
 *
 *-------------------------------------------------------------------
 */
static void
InfoCallback(const SSL *ssl, int where, int ret) {
    State *statePtr = (State*)SSL_get_app_data((SSL *)ssl);
    Tcl_Interp *interp	= statePtr->interp;
    Tcl_Obj *cmdPtr;

	if (where & SSL_CB_READ)		minor = "read";
	else if (where & SSL_CB_WRITE)		minor = "write";
	else if (where & SSL_CB_LOOP)		minor = "loop";
	else if (where & SSL_CB_EXIT)		minor = "exit";
	else					minor = "unknown";
    }

    /* Create command to eval from callback */
    /* Create command to eval */
    cmdPtr = Tcl_DuplicateObj(statePtr->callback);
    Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj("info", -1));
    Tcl_ListObjAppendElement(interp, cmdPtr,
	    Tcl_NewStringObj(Tcl_GetChannelName(statePtr->self), -1));
    Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(major, -1));
    Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(minor, -1));

 *				  failure alert to peer, and terminate handshake.
 *	    1			- the certificate is deemed valid, continue with handshake.
 *	    empty string	- no change to certificate validation
 *
 * Side effects:
 *	The err field of the currently operative State is set
 *	  to a string describing the SSL negotiation failure reason
 *
 *-------------------------------------------------------------------
 */
static int
VerifyCallback(int ok, X509_STORE_CTX *ctx) {
    Tcl_Obj *cmdPtr;
    SSL   *ssl		= (SSL*)X509_STORE_CTX_get_ex_data(ctx, SSL_get_ex_data_X509_STORE_CTX_idx());
    X509  *cert		= X509_STORE_CTX_get_current_cert(ctx);

	if (statePtr->vflags & SSL_VERIFY_FAIL_IF_NO_PEER_CERT) {
	    return ok;
	} else {
	    return 1;
	}
    }

    /* Create command to eval from callback */
    /* Create command to eval */
    cmdPtr = Tcl_DuplicateObj(statePtr->vcmd);
    Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj("verify", -1));
    Tcl_ListObjAppendElement(interp, cmdPtr,
	Tcl_NewStringObj(Tcl_GetChannelName(statePtr->self), -1));
    Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewIntObj(depth));
    Tcl_ListObjAppendElement(interp, cmdPtr, Tls_NewX509Obj(interp, cert));
    Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewIntObj(ok));
    Tcl_ListObjAppendElement(interp, cmdPtr,
	Tcl_NewStringObj((char*)X509_verify_cert_error_string(err), -1));

    statePtr->flags |= TLS_TCL_CALLBACK;

    /* Eval callback command */
    Tcl_IncrRefCount(cmdPtr);
    ok = EvalCallback(interp, statePtr, cmdPtr);
    Tcl_DecrRefCount(cmdPtr);

    statePtr->flags &= ~(TLS_TCL_CALLBACK);
    return(ok);	/* By default, leave verification unchanged.	*/
    return(ok);	/* By default, leave verification unchanged. */
}

/*
 *-------------------------------------------------------------------
 *
 * Tls_Error --
 *
 *	Calls callback with $fd and $msg - so the callback can decide
 *	what to do with errors.
 *
 * Side effects:
 *	The err field of the currently operative State is set
 *	  to a string describing the SSL negotiation failure reason
 *
 *-------------------------------------------------------------------
 */
void
Tls_Error(State *statePtr, char *msg) {
    Tcl_Interp *interp	= statePtr->interp;
    Tcl_Obj *cmdPtr;

 *
 * KeyLogCallback --
 *
 *	Write received key data to log file.
 *
 * Side effects:
 *	none
 *
 *-------------------------------------------------------------------
 */
void KeyLogCallback(const SSL *ssl, const char *line) {
    char *str = getenv(SSLKEYLOGFILE);
    FILE *fd;
    if (str) {
	fd = fopen(str, "a");
	fprintf(fd, "%s\n",line);
	fclose(fd);
    }
}

/*
 *-------------------------------------------------------------------
 *
 * Password Callback --
 *
 *	Called when a password is needed to unpack RSA and PEM keys.
 *	Evals any bound password script and returns the result as
 *	the password string.
 *
 *-------------------------------------------------------------------
 */
static int
PasswordCallback(char *buf, int size, int verify, void *udata) {
    State *statePtr	= (State *) udata;
    Tcl_Interp *interp	= statePtr->interp;
    Tcl_Obj *cmdPtr;

	    strncpy(buf, ret, (size_t) size);
	    return (int)strlen(ret);
	} else {
	    return -1;
	}
    }

    /* Create command to eval from callback */
    /* Create command to eval */
    cmdPtr = Tcl_DuplicateObj(statePtr->password);

    Tcl_Preserve((ClientData) interp);
    Tcl_Preserve((ClientData) statePtr);

    /* Eval callback and success for ok, abort for error, continue for continue */
    Tcl_IncrRefCount(cmdPtr);

    if (statePtr->callback == (Tcl_Obj*)NULL) {
	return SSL_TLSEXT_ERR_OK;
    } else if (ssl == NULL) {
	return SSL_TLSEXT_ERR_NOACK;
    }

    /* Create command to eval from callback */
    /* Create command to eval */
    cmdPtr = Tcl_DuplicateObj(statePtr->callback);
    Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj("session", -1));

    /* Session id */
    session_id = SSL_SESSION_get_id(session, &ulen);
    Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewByteArrayObj(session_id, (int) ulen));

	res = SSL_TLSEXT_ERR_NOACK;
    }

    if (statePtr->vcmd == (Tcl_Obj*)NULL) {
	return res;
    }

    /* Create command to eval from callback */
    /* Create command to eval */
    cmdPtr = Tcl_DuplicateObj(statePtr->vcmd);
    Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj("alpn", -1));
    Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(*out, -1));

    /* Eval callback command */
    Tcl_IncrRefCount(cmdPtr);
    if ((code = EvalCallback(interp, statePtr, cmdPtr)) > 1) {

#endif

/*
 *-------------------------------------------------------------------
 *
 * SNI Callback for Servers --
 *
 *	Perform server-side SNI hostname selection after receiving SNI header.
 *	Called after hello callback but before ALPN callback.
 *	Perform server-side SNI hostname selection after receiving SNI extension
 *	in Client Hello. Called after hello callback but before ALPN callback.
 *
 * Results:
 *	None
 *
 * Side effects:
 *	Calls callback (if defined)
 *

    dprintf("Called");

    if (ssl == NULL || arg == NULL) {
	return SSL_TLSEXT_ERR_NOACK;
    }

    /* Only works for TLS 1.2 and earlier */
    servername = SSL_get_servername(ssl, TLSEXT_NAMETYPE_host_name);
    if (!servername || servername[0] == '\0') {
        return SSL_TLSEXT_ERR_NOACK;
	return SSL_TLSEXT_ERR_NOACK;
    }

    if (statePtr->vcmd == (Tcl_Obj*)NULL) {
	return SSL_TLSEXT_ERR_OK;
    }

    /* Create command to eval from callback */
    /* Create command to eval */
    cmdPtr = Tcl_DuplicateObj(statePtr->vcmd);
    Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj("sni", -1));
    Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(servername , -1));

    /* Eval callback command */
    Tcl_IncrRefCount(cmdPtr);
    if ((code = EvalCallback(interp, statePtr, cmdPtr)) > 1) {

    } else if (ssl == NULL || arg == NULL) {
	return SSL_CLIENT_HELLO_ERROR;
    }

    /* Get names */
    if (!SSL_client_hello_get0_ext(ssl, TLSEXT_TYPE_server_name, &p, &remaining) || remaining <= 2) {
	*alert = SSL_R_SSLV3_ALERT_ILLEGAL_PARAMETER;
        return SSL_CLIENT_HELLO_ERROR;
	return SSL_CLIENT_HELLO_ERROR;
    }

    /* Extract the length of the supplied list of names. */
    len = (*(p++) << 8);
    len += *(p++);
    if (len + 2 != remaining) {
	*alert = SSL_R_SSLV3_ALERT_ILLEGAL_PARAMETER;
        return SSL_CLIENT_HELLO_ERROR;
	return SSL_CLIENT_HELLO_ERROR;
    }
    remaining = len;

    /* The list in practice only has a single element, so we only consider the first one. */
    if (remaining == 0 || *p++ != TLSEXT_NAMETYPE_host_name) {
	*alert = SSL_R_TLSV1_ALERT_INTERNAL_ERROR;
        return SSL_CLIENT_HELLO_ERROR;
	return SSL_CLIENT_HELLO_ERROR;
    }
    remaining--;

    /* Now we can finally pull out the byte array with the actual hostname. */
    if (remaining <= 2) {
	*alert = SSL_R_TLSV1_ALERT_INTERNAL_ERROR;
        return SSL_CLIENT_HELLO_ERROR;
	return SSL_CLIENT_HELLO_ERROR;
    }
    len = (*(p++) << 8);
    len += *(p++);
    if (len + 2 > remaining) {
	*alert = SSL_R_TLSV1_ALERT_INTERNAL_ERROR;
        return SSL_CLIENT_HELLO_ERROR;
	return SSL_CLIENT_HELLO_ERROR;
    }
    remaining = len;
    servername = (const char *)p;

    /* Create command to eval from callback */
    /* Create command to eval */
    cmdPtr = Tcl_DuplicateObj(statePtr->vcmd);
    Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj("hello", -1));
    Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(servername, (int) len));

    /* Eval callback command */
    Tcl_IncrRefCount(cmdPtr);
    if ((code = EvalCallback(interp, statePtr, cmdPtr)) > 1) {

#endif
	case TLS_TLS1_3:
#if defined(NO_TLS1_3) || defined(OPENSSL_NO_TLS1_3)
	    Tcl_AppendResult(interp, protocols[index], ": protocol not supported", NULL);
	    return TCL_ERROR;
#else
	    ctx = SSL_CTX_new(TLS_method());
            SSL_CTX_set_min_proto_version(ctx, TLS1_3_VERSION);
	    SSL_CTX_set_min_proto_version(ctx, TLS1_3_VERSION);
	    SSL_CTX_set_max_proto_version(ctx, TLS1_3_VERSION);
	    break;
#endif
	default:
	    break;
    }
    if (ctx == NULL) {

    }

    objPtr = Tcl_NewListObj(0, NULL);

#if OPENSSL_VERSION_NUMBER < 0x10100000L && !defined(NO_SSL2) && !defined(OPENSSL_NO_SSL2)
    Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj(protocols[TLS_SSL2], -1));
#endif
#if !defined(NO_SSL3) && !defined(OPENSSL_NO_SSL3)
#if !defined(NO_SSL3) && !defined(OPENSSL_NO_SSL3) && !defined(OPENSSL_NO_SSL3_METHOD)
    Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj(protocols[TLS_SSL3], -1));
#endif
#if !defined(NO_TLS1) && !defined(OPENSSL_NO_TLS1)
#if !defined(NO_TLS1) && !defined(OPENSSL_NO_TLS1) && !defined(OPENSSL_NO_TLS1_METHOD)
    Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj(protocols[TLS_TLS1], -1));
#endif
#if !defined(NO_TLS1_1) && !defined(OPENSSL_NO_TLS1_1)
#if !defined(NO_TLS1_1) && !defined(OPENSSL_NO_TLS1_1) && !defined(OPENSSL_NO_TLS1_1_METHOD)
    Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj(protocols[TLS_TLS1_1], -1));
#endif
#if !defined(NO_TLS1_2) && !defined(OPENSSL_NO_TLS1_2)
#if !defined(NO_TLS1_2) && !defined(OPENSSL_NO_TLS1_2) && !defined(OPENSSL_NO_TLS1_2_METHOD)
    Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj(protocols[TLS_TLS1_2], -1));
#endif
#if !defined(NO_TLS1_3) && !defined(OPENSSL_NO_TLS1_3)
    Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj(protocols[TLS_TLS1_3], -1));
#endif

    Tcl_SetObjResult(interp, objPtr);

	if (opt[0] != '-')
	    break;

	OPTOBJ("-alpn", alpn);
	OPTSTR("-cadir", CAdir);
	OPTSTR("-cafile", CAfile);
	OPTBYTE("-cert", cert, cert_len);
	OPTSTR("-certfile", certfile);
	OPTSTR("-cipher", ciphers);
	OPTSTR("-ciphers", ciphers);
	OPTSTR("-ciphersuites", ciphersuites);
	OPTOBJ("-command", script);
	OPTSTR("-dhparams", DHparams);
	OPTBYTE("-key", key, key_len);
	OPTSTR("-keyfile", keyfile);
	OPTSTR("-model", model);
	OPTOBJ("-password", password);
	OPTBOOL("-post_handshake", post_handshake);
	OPTBOOL("-require", require);
	OPTBOOL("-request", request);
	OPTBOOL("-require", require);
	OPTINT("-securitylevel", level);
	OPTBOOL("-server", server);
	OPTSTR("-servername", servername);
	OPTSTR("-session_id", session_id);
	OPTBOOL("-ssl2", ssl2);
	OPTBOOL("-ssl3", ssl3);
	OPTBOOL("-tls1", tls1);
	OPTBOOL("-tls1.1", tls1_1);
	OPTBOOL("-tls1.2", tls1_2);
	OPTBOOL("-tls1.3", tls1_3);
	OPTOBJ("-validatecommand", vcmd);
	OPTOBJ("-vcmd", vcmd);
	OPTBYTE("-cert", cert, cert_len);
	OPTBYTE("-key", key, key_len);

	OPTBAD("option", "-alpn, -cadir, -cafile, -cert, -certfile, -cipher, -ciphersuites, -command, -dhparams, -key, -keyfile, -model, -password, -require, -request, -securitylevel, -server, -servername, -session_id, -ssl2, -ssl3, -tls1, -tls1.1, -tls1.2, -tls1.3, or -validatecommand");
	OPTBAD("option", "-alpn, -cadir, -cafile, -cert, -certfile, -cipher, -ciphersuites, -command, -dhparams, -key, -keyfile, -model, -password, -post_handshake, -request, -require, -securitylevel, -server, -servername, -session_id, -ssl2, -ssl3, -tls1, -tls1.1, -tls1.2, -tls1.3, or -validatecommand");

	return TCL_ERROR;
    }
    if (request)	    verify |= SSL_VERIFY_CLIENT_ONCE | SSL_VERIFY_PEER;
    if (request && require) verify |= SSL_VERIFY_FAIL_IF_NO_PEER_CERT;
    if (request && post_handshake)  verify |= SSL_VERIFY_POST_HANDSHAKE;
    if (verify == 0)	verify = SSL_VERIFY_NONE;
    if (request)		verify |= SSL_VERIFY_CLIENT_ONCE | SSL_VERIFY_PEER;
    if (request && require)	verify |= SSL_VERIFY_FAIL_IF_NO_PEER_CERT;
    if (request && post_handshake)	verify |= SSL_VERIFY_POST_HANDSHAKE;
    if (verify == 0)		verify = SSL_VERIFY_NONE;

    proto |= (ssl2 ? TLS_PROTO_SSL2 : 0);
    proto |= (ssl3 ? TLS_PROTO_SSL3 : 0);
    proto |= (tls1 ? TLS_PROTO_TLS1 : 0);
    proto |= (tls1_1 ? TLS_PROTO_TLS1_1 : 0);
    proto |= (tls1_2 ? TLS_PROTO_TLS1_2 : 0);
    proto |= (tls1_3 ? TLS_PROTO_TLS1_3 : 0);

	Tls_Free((char *) statePtr);
	return TCL_ERROR;
    }

    /* Set host server name */
    if (servername) {
	/* Sets the server name indication (SNI) in ClientHello extension */
	/* Per RFC 6066, hostname is a ASCII encoded string. */
	if (!SSL_set_tlsext_host_name(statePtr->ssl, servername) && require) {
	    Tcl_AppendResult(interp, "setting TLS host name extension failed", (char *) NULL);
            Tls_Free((char *) statePtr);
            return TCL_ERROR;
        }
	    Tls_Free((char *) statePtr);
	    return TCL_ERROR;
	}

	/* Configure server host name checks in the SSL client. Set DNS hostname to
	   name for peer certificate checks. SSL_set1_host has limitations. */
	if (!SSL_add1_host(statePtr->ssl, servername)) {
	    Tcl_AppendResult(interp, "setting DNS host name failed", (char *) NULL);
            Tls_Free((char *) statePtr);
            return TCL_ERROR;
	    Tls_Free((char *) statePtr);
	    return TCL_ERROR;
	}
    }

    /* Resume session id */
    if (session_id && strlen(session_id) <= SSL_MAX_SID_CTX_LENGTH) {
	/* SSL_set_session() */
	if (!SSL_SESSION_set1_id_context(SSL_get_session(statePtr->ssl), session_id, (unsigned int) strlen(session_id))) {

	/* Server callbacks */
	SSL_CTX_set_tlsext_servername_arg(statePtr->ctx, (void *)statePtr);
	SSL_CTX_set_tlsext_servername_callback(statePtr->ctx, SNICallback);
	SSL_CTX_set_client_hello_cb(statePtr->ctx, HelloCallback, (void *)statePtr);
	if (statePtr->protos != NULL) {
	    SSL_CTX_set_alpn_select_cb(statePtr->ctx, ALPNCallback, (void *)statePtr);
#ifdef USE_NPN
	    if (tls1_2 == 0 && tls1_3 == 0) {
	    SSL_CTX_set_next_protos_advertised_cb(statePtr->ctx, NPNCallback, (void *)statePtr);
		SSL_CTX_set_next_protos_advertised_cb(statePtr->ctx, NPNCallback, (void *)statePtr);
	    }
#endif
	}

	/* Enable server to send cert request after handshake (TLS 1.3 only) */
	/* A write operation must take place for the Certificate Request to be
	   sent to the client, this can be done with SSL_do_handshake(). */
	if (request && post_handshake) {
	    SSL_verify_client_post_handshake(statePtr->ssl);
	}

	/* Set server mode */
	statePtr->flags |= TLS_TCL_SERVER;
	SSL_set_accept_state(statePtr->ssl);
    } else {
	/* Client callbacks */
	if (statePtr->protos != NULL) {
#ifdef USE_NPN
	if (statePtr->protos != NULL && tls1_2 == 0 && tls1_3 == 0) {
	    SSL_CTX_set_next_proto_select_cb(statePtr->ctx, ALPNCallback, (void *)statePtr);
	}
#endif
	}

	/* Session caching */
	SSL_CTX_set_session_cache_mode(statePtr->ctx, SSL_SESS_CACHE_CLIENT | SSL_SESS_CACHE_NO_INTERNAL_STORE);
	SSL_CTX_sess_set_new_cb(statePtr->ctx, SessionCallback);

	/* Enable post handshake Authentication extension. TLS 1.3 only, not http/2. */
	if (request && post_handshake) {
	    SSL_set_post_handshake_auth(statePtr->ssl, 1);
	}

	/* Set client mode */
	SSL_set_connect_state(statePtr->ssl);
    }
    SSL_set_bio(statePtr->ssl, statePtr->p_bio, statePtr->p_bio);
    BIO_set_ssl(statePtr->bio, statePtr->ssl, BIO_NOCLOSE);

    /*
     * End of SSL Init

#if !defined(NO_TLS1_3) && !defined(OPENSSL_NO_TLS1_3)
	off |= (ENABLED(proto, TLS_PROTO_TLS1_3) ? 0 : SSL_OP_NO_TLSv1_3);
#endif
	break;
    }

    ERR_clear_error();
    ctx = SSL_CTX_new(method);

    ctx = SSL_CTX_new(method);
    if (!ctx) {
	return(NULL);
    }

    if (getenv(SSLKEYLOGFILE)) {
	SSL_CTX_set_keylog_callback(ctx, KeyLogCallback);
    }

#if OPENSSL_VERSION_NUMBER < 0x10101000L
    SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);	/* handle new handshakes in background. On by default in OpenSSL 1.1.1. */
#endif
    SSL_CTX_sess_set_cache_size(ctx, 128);

    /* Set user defined ciphers, cipher suites, and security level */
    if ((ciphers != NULL) && !SSL_CTX_set_cipher_list(ctx, ciphers)) {
	    Tcl_AppendResult(interp, "Set ciphers failed: No valid ciphers", (char *) NULL);
	    SSL_CTX_free(ctx);
	    return NULL;
	Tcl_AppendResult(interp, "Set ciphers failed: No valid ciphers", (char *) NULL);
	SSL_CTX_free(ctx);
	return NULL;
    }
    if ((ciphersuites != NULL) && !SSL_CTX_set_ciphersuites(ctx, ciphersuites)) {
	    Tcl_AppendResult(interp, "Set cipher suites failed: No valid ciphers", (char *) NULL);
	    SSL_CTX_free(ctx);
	    return NULL;
	Tcl_AppendResult(interp, "Set cipher suites failed: No valid ciphers", (char *) NULL);
	SSL_CTX_free(ctx);
	return NULL;
    }

    /* Set security level */
    if (level > -1 && level < 6) {
	/* SSL_set_security_level */
	SSL_CTX_set_security_level(ctx, level);
    }

    chan = Tcl_GetTopChannel(chan);
    if (Tcl_GetChannelType(chan) != Tls_ChannelType()) {
	Tcl_AppendResult(interp, "bad channel \"", Tcl_GetChannelName(chan),
		"\": not a TLS channel", NULL);
	return TCL_ERROR;
    }
    statePtr = (State *) Tcl_GetChannelInstanceData(chan);

    /* Get certificate for peer or self */
    if (objc == 2) {
	peer = SSL_get_peer_certificate(statePtr->ssl);
    } else {
	peer = SSL_get_certificate(statePtr->ssl);
    }
    if (peer) {
	objPtr = Tls_NewX509Obj(interp, peer);

	bits = SSL_CIPHER_get_bits(cipher, &alg_bits);
	Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj("bits", -1));
	Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewIntObj(bits));
	Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj("secret_bits", -1));
	Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewIntObj(alg_bits));
	/* alg_bits is actual key secret bits. If use bits and secret (algorithm) bits differ,
           the rest of the bits are fixed, i.e. for limited export ciphers (bits < 56) */
	   the rest of the bits are fixed, i.e. for limited export ciphers (bits < 56) */
	Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj("min_version", -1));
	Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj(SSL_CIPHER_get_version(cipher), -1));

	/* Get OpenSSL-specific ID, not IANA ID */
	Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj("id", -1));
	Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewIntObj((int) SSL_CIPHER_get_id(cipher)));

    static int initialized = 0;
    int status = TCL_OK;
#if defined(OPENSSL_THREADS) && defined(TCL_THREADS)
    size_t num_locks;
#endif

    if (uninitialize) {
        if (!initialized) {
            dprintf("Asked to uninitialize, but we are not initialized");
	if (!initialized) {
	    dprintf("Asked to uninitialize, but we are not initialized");

            return(TCL_OK);
        }
	    return(TCL_OK);
	}

        dprintf("Asked to uninitialize");
	dprintf("Asked to uninitialize");

#if defined(OPENSSL_THREADS) && defined(TCL_THREADS)
        Tcl_MutexLock(&init_mx);
	Tcl_MutexLock(&init_mx);

        if (locks) {
            free(locks);
            locks = NULL;
            locksCount = 0;
        }
	if (locks) {
	    free(locks);
	    locks = NULL;
	    locksCount = 0;
	}
#endif
        initialized = 0;
	initialized = 0;

#if defined(OPENSSL_THREADS) && defined(TCL_THREADS)
        Tcl_MutexUnlock(&init_mx);
	Tcl_MutexUnlock(&init_mx);
#endif

        return(TCL_OK);
	return(TCL_OK);
    }

    if (initialized) {
        dprintf("Called, but using cached value");
        return(status);
	dprintf("Called, but using cached value");
	return(status);
    }

    dprintf("Called");

#if defined(OPENSSL_THREADS) && defined(TCL_THREADS)
    Tcl_MutexLock(&init_mx);
#endif

    #### iopts: [tls::import] option
    ### How many arguments the following the option to consume
    variable socketOptionRules {
        {0 -async sopts 0}
        {* -myaddr sopts 1}
        {0 -myport sopts 1}
        {* -type sopts 1}
        {* -alpn iopts 1}
        {* -cadir iopts 1}
        {* -cafile iopts 1}
        {* -cert iopts 1}
        {* -certfile iopts 1}
        {* -cipher iopts 1}
        {* -ciphersuites iopts 1}
        {* -command iopts 1}
        {* -dhparams iopts 1}
        {* -key iopts 1}
        {* -keyfile iopts 1}
        {* -password iopts 1}
        {* -post_handshake iopts 1}
        {* -request iopts 1}
        {* -require iopts 1}
        {* -securitylevel iopts 1}
        {* -autoservername discardOpts 1}
        {* -server iopts 1}
        {* -servername iopts 1}
        {* -session_id iopts 1}
        {* -alpn iopts 1}
        {* -ssl2 iopts 1}
        {* -ssl3 iopts 1}
        {* -tls1 iopts 1}
        {* -tls1.1 iopts 1}
        {* -tls1.2 iopts 1}
        {* -tls1.3 iopts 1}
        {* -validatecommand iopts 1}
        {* -vcmd iopts 1}
    }

    # tls::socket and tls::init options as a humane readable string
    variable socketOptionsNoServer
    variable socketOptionsServer

    # Internal [switch] body to validate options

	log 1 "tls::_accept error: ${::errorInfo}"
	close $chan
	error $err $::errorInfo $::errorCode
    } else {
	log 2 "tls::_accept - called \"$callback\" succeeded"
    }
}

#
# Sample callback for hooking: -
#
# error
# verify
# info
#