2000-07-26  Jeff Hobbs  <hobbs@scriptics.com>

	* merged all changes from tls-1-3-io-rewrite back into main branch

	* tests/tlsIO.test: updated comments, fixed a pcCrash case that
	was due to debug assertion in Windows SSL.

	* tls.c (ImportObjCmd): removed unnecessary use of 'bio' arg.
	(Tls_Init): check return value of SSL_library_init.  Also lots of
	whitespace cleanup (more like Tcl Eng style guide), but not all
	code was cleaned up.

	* tlsBIO.c: minor whitespace cleanup

	* tlsIO.c: minor whitespace cleanup.
	(TlsInputProc, TlsOutputProc): Added ERR_clear_error before calls
	to BIO_read or BIO_write, because we could otherwise end up
	pulling an error off the stack that didn't belong to us.  Also
	cleanup up excessive use of gotos.

2000-07-20  Jeff Hobbs  <hobbs@scriptics.com>

	* tests/tlsIO.test: corrected various tests to be correct for TLS
	stacked channels (as opposed to the standard sockets the test
	suite was adopted from).  Key differences are that TLS cannot
	operate in one process without all channels being non-blocking, or
	the handshake will block, and handshaking must be forced in some
	cases.  Also, handshakes don't seem to complete unless the client
	has placed at least one byte for the server to read in the channel.

	* tests/remote.tcl: corrected the finding of tests certificates

	* tlsIO.c (TlsCloseProc): removed deleting of timer handler as
	that is handled by Tls_Clean.

	* tls.tcl (tls::_accept): corrected the internal _accept to
	trickle callback errors to the user.

	* Makefile.in: made the install-binaries target regenerate the
	pkgIndex.tcl correctly.  The test target probably shouldn't screw
	it up, but this is to be on the safe side.

2000-07-17  Jeff Hobbs  <hobbs@scriptics.com>

	* pkgIndex.tcl.in:
	* configure.in: updated version to 1.4

2000-07-13  Jeff Hobbs  <hobbs@scriptics.com>

	* tests/tlsIO.test: enabled tests 2.10, 7.[1245] (there is no 3),
	which now pass.  Added some comments to other failing tests.

2000-07-11  Jeff Hobbs  <hobbs@scriptics.com>

	* tlsIO.c: changed all the channel procs to start with Tls* for
	better parity when comparing with Transform channel procs.
	Rewrote TlsWatchProc, added TlsNotifyProc according to the new
	channel design, which also leaves TlsChannelHandler unused.

	* tlsBIO.c (BioCtrl): changed BIO_CTRL_FLUSH case to use
	Tcl_WriteRaw instead of Tcl_Flush (to operate on correct channel
	in the stack instead of starting at the top again).  Would
	otherwise cause a recursive stack bomb when implicit handshaking
	took effect.

	* tests/tlsIO.test: removed changes made to test suite (all tests
	that ran before now pass correctly), and changed some accept proc
	args to reflect that a sock is an arg, not a file.

2000-07-10  Jeff Hobbs  <hobbs@scriptics.com>

	* tlsBIO.c (BioWrite, BioRead): changed Tcl_Read/Write to
	Tcl_ReadRaw/TclWriteRaw.

	* tls.c: added use of Tcl_GetTopChannel after Tcl_GetChannel and
	got return value from Tcl_StackChannel.

	* tests/tlsIO.test: added some handshaking that shouldn't be
	necessary, but we crash otherwise (needs more testing).

	* tlsIO.c: added support for "corrected" stacked channels.  All
	the above channels are in TCL_CHANNEL_VERSION_2 #ifdefs.

2000-06-05  Scott Stanton  <stanton@ajubasolutions.com>

	* Makefile.in: Fixed broken test target.

	* tlsInt.h: 
	* tls.c: Cleaned up declarations of Tls_Clean to avoid errors on
	Windows (lint).

#
# Copyright (c) 1999-2000 Ajuba Solutions.
# All rights reserved.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: Makefile.in,v 1.14 2000/07/20 02:44:16 wart Exp $
# RCS: @(#) $Id: Makefile.in,v 1.15 2000/07/27 01:58:18 hobbs Exp $


lib_BINARIES=$(tls_LIB_FILE)
BINARIES=$(lib_BINARIES)

#========================================================================
# Enumerate the names of the source files included in this package.

libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include

DESTDIR =
RELPATH = @RELPATH@

pkgdatadir = $(datadir)/@PACKAGE@@VERSION@
pkglibdir = $(libdir)/@PACKAGE@@VERSION@
pkgincludedir = $(includedir)/@PACKAGE@@VERSION@

top_builddir = .

libraries: $(tls_SCRIPT_FILES)

doc:

install: all install-binaries install-libraries install-doc

install-binaries: binaries install-lib-binaries install-bin-binaries
	sed -e "s#\@RELPATH\@#$(RELPATH)#" \
	-e "s#\@tls_LIB_FILE\@#$(tls_LIB_FILE)#" \
	< $(srcdir)/pkgIndex.tcl.in > pkgIndex.tcl
	$(INSTALL_DATA) pkgIndex.tcl $(pkglibdir)

#========================================================================
# This rule installs platform-independent files, such as header files.
#========================================================================

install-libraries: libraries

# like dots in # library names (Windows).  The VERSION variable is
# used on the other systems.
#--------------------------------------------------------------------

PACKAGE=tls

MAJOR_VERSION=1
MINOR_VERSION=3
MINOR_VERSION=4
PATCHLEVEL=

VERSION=${MAJOR_VERSION}.${MINOR_VERSION}${PATCHLEVEL}
NODOT_VERSION=${MAJOR_VERSION}${MINOR_VERSION}

AC_SUBST(PACKAGE)
AC_SUBST(VERSION)

# pkgIndex.tcl -
#    A new manually generated "pkgIndex.tcl" file for tls to replace the original
#    which didn't include the commands from "tls.tcl".
# pkgIndex.tcl - 
#
#    A new manually generated "pkgIndex.tcl" file for tls to
#    replace the original which didn't include the commands from "tls.tcl".
#
#    Al Borr 12/99, last revised Jan 11/00.

package ifneeded tls 1.3 "[list load [file join $dir @RELPATH@ @tls_LIB_FILE@] ] ; [list source [file join $dir tls.tcl] ]"
package ifneeded tls 1.4 "[list load [file join $dir @RELPATH@ @tls_LIB_FILE@] ] ; [list source [file join $dir tls.tcl] ]"

# This file contains Tcl code to implement a remote server that can be
# used during testing of Tcl socket code. This server is used by some
# of the tests in socket.test.
#
# Source this file in the remote server you are using to test Tcl against.
#
# Copyright (c) 1995-1996 Sun Microsystems, Inc.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: remote.tcl,v 1.4 2000/06/06 22:01:41 aborr Exp $
# RCS: @(#) $Id: remote.tcl,v 1.5 2000/07/27 01:58:19 hobbs Exp $

# load tls package
package require tls

# Initialize message delimitor

# Initialize command array

    puts "from the shell. The tests will not work properly if you set"
    puts "remoteServerIP to \"localhost\" or 127.0.0.1."
    puts ""
    puts -nonewline "Type Ctrl-C to terminate--> "
    flush stdout
}

set certsDir	[file join [file dirname [info script]] certs]
set serverCert	[file join $certsDir server.pem]
set caCert	[file join $certsDir cacert.pem]
set serverKey	[file join $certsDir skey.pem]
if {[catch {set serverSocket \
    [tls::socket -myaddr $serverAddress -server __accept__ \
	[tls::socket -myaddr $serverAddress -server __accept__ \
    	-cafile [file join [pwd] certs cacert.pem] \
    	-certfile [file join [pwd] certs server.pem] \
	-cafile $caCert -certfile $serverCert -keyfile $serverKey \
    	-keyfile [file join [pwd] certs skey.pem] \
	$serverPort]} msg]} {
    puts "Server on $serverAddress:$serverPort cannot start: $msg"
} else {
    vwait __server_wait_variable__
}

# Commands tested in this file: socket.
#
# This file contains a collection of tests for one or more of the Tcl
# built-in commands.  Sourcing this file into Tcl runs the tests and
# generates output for errors.  No output means no errors were found.
#
# Copyright (c) 1994-1996 Sun Microsystems, Inc.
# Copyright (c) 1998-2000 Ajuba Solutions. 
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: tlsIO.test,v 1.14 2000/06/08 00:06:40 aborr Exp $
# RCS: @(#) $Id: tlsIO.test,v 1.15 2000/07/27 01:58:19 hobbs Exp $

# Running socket tests with a remote server:
# ------------------------------------------
# 
# Some tests in socket.test depend on the existence of a remote server to
# which they connect. The remote server must be an instance of tcltest and it
# must run the script found in the file "remote.tcl" in this directory. You

# 
#     % set remoteServerIP <name or address of machine on which server runs>
#     % set remoteServerPort 8048
# 
# These variables are also settable from the environment. On Unix, you can:
# 
#     shell% setenv remoteServerIP machine.where.server.runs
#     shell% senetv remoteServerPort 8048
#     shell% setenv remoteServerPort 8048
# 
# The preamble of the socket.test file checks to see if the variables are set
# either in Tcl or in the environment; if they are, it attempts to connect to
# the server. If the connection is successful, the tests using the remote
# server will be performed; otherwise, it will attempt to start the remote
# server (via exec) on platforms that support this, on the local host,
# listening at port 8048. If all fails, a message is printed and the tests
# using the remote server are not performed.

proc dputs {msg} { return ; puts stderr $msg ; flush stderr }

if {[lsearch [namespace children] ::tcltest] == -1} {
    package require tcltest
    namespace import -force ::tcltest::*
}

# Load the tls package

package require tls

set tlsServerPort 8048

set certsDir [file join [file dirname [info script]] certs] 
# Specify where the certificates are

set certsDir	[file join [file dirname [info script]] certs]
set serverCert [file join $certsDir server.pem]
set clientCert [file join $certsDir client.pem]
set caCert [file join $certsDir cacert.pem]
set serverKey [file join $certsDir skey.pem]
set clientKey [file join $certsDir ckey.pem]
set serverCert	[file join $certsDir server.pem]
set clientCert	[file join $certsDir client.pem]
set caCert	[file join $certsDir cacert.pem]
set serverKey	[file join $certsDir skey.pem]
set clientKey	[file join $certsDir ckey.pem]

# Some tests require the testthread command
# Some tests require the testthread and exec commands

set ::tcltest::testConstraints(testthread) \
	[expr {[info commands testthread] != {}}]
set ::tcltest::testConstraints(exec) [expr {[info commands exec] != {}}]

#
# If remoteServerIP or remoteServerPort are not set, check in the
# environment variables for externally set values.
#

if {![info exists remoteServerIP]} {
    if {[info exists env(remoteServerIP)]} {
	set remoteServerIP $env(remoteServerIP)
    }
}
if {![info exists remoteServerPort]} {
    if {[info exists env(remoteServerPort)]} {
	set remoteServerPort $env(remoteServerPort)
    } else {
        if {[info exists remoteServerIP]} {
	    set remoteServerPort $tlsServerPort
        }
    }
}

proc do_handshake {s {type readable} {cmd {}} args} {
    if {[eof $s]} {
	close $s
	dputs "handshake: eof"
	set ::do_handshake "eof"
    } elseif {[catch {tls::handshake $s} result]} {
	# Some errors are normal.
	dputs "handshake: $result"
    } elseif {$result == 1} {
	# Handshake complete
	if {[llength $args]} { eval fconfigure $s $args }
	if {$cmd == ""} {
	    fileevent $s $type ""
	} else {
	    fileevent $s $type "$cmd $s"
	}
	dputs "handshake: complete"
	set ::do_handshake "complete"
    } else {
	dputs "handshake: in progress"
    }
}

#
# Check if we're supposed to do tests against the remote server
#

set doTestsWithRemoteServer 1
if {![info exists remoteServerIP] && ($tcl_platform(platform) != "macintosh")} {

set remoteProcChan ""
set commandSocket ""
if {$doTestsWithRemoteServer} {
    catch {close $commandSocket}
    if {[catch {set commandSocket [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIP \
	    $remoteServerIP $remoteServerPort]}] != 0} {
	    $remoteServerPort]}] != 0} {
	if {[info commands exec] == ""} {
	    set noRemoteTestReason "can't exec"
	    set doTestsWithRemoteServer 0
	} else {
	    set remoteServerIP 127.0.0.1
	    set remoteFile [file join [pwd] remote.tcl]
	    if {[catch {set remoteProcChan \
				[open "|[list $::tcltest::tcltest $remoteFile \
					-serverIsSilent \
		    [open "|[list $::tcltest::tcltest $remoteFile \
		    -serverIsSilent -port $remoteServerPort \
					-port $remoteServerPort \
					-address $remoteServerIP]" \
		    -address $remoteServerIP]" w+]} msg] == 0} {
					w+]} \
		   msg] == 0} {
		after 1000
		if {[catch {set commandSocket [tls::socket \
		    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
		if {[catch {set commandSocket [tls::socket -cafile $caCert \
			-certfile $clientCert -keyfile $clientKey \
				$remoteServerIP \
				$remoteServerPort]} msg] == 0} {
			$remoteServerIP $remoteServerPort]} msg] == 0} {
		    fconfigure $commandSocket -translation crlf -buffering line
		} else {
		    set noRemoteTestReason $msg
		    set doTestsWithRemoteServer 0
		}
	    } else {
		set noRemoteTestReason "$msg $::tcltest::tcltest"

		    return [lindex $resp 1]
		}
	    } else {
		append resp $line "\n"
	    }
	}
    }

    sendCommand [list proc dputs [info args dputs] [info body dputs]]

    proc sendCertValues {} {
	# We need to be able to send certificate values that normalize
	# filenames across platforms
	sendCommand {
	    set certsDir	[file join [file dirname [info script]] certs]
	    set serverCert	[file join $certsDir server.pem]
	    set clientCert	[file join $certsDir client.pem]
	    set caCert		[file join $certsDir cacert.pem]
	    set serverKey	[file join $certsDir skey.pem]
	    set clientKey	[file join $certsDir ckey.pem]
	}
    }
}

test tlsIO-1.1 {arg parsing for socket command} {socket} {
    list [catch {tls::socket -server} msg] $msg
} {1 {wrong # args: should be "tls::socket -server command ?options? port"}}

test tlsIO-1.2 {arg parsing for socket command} {socket} {

    set f [open script w]
    puts $f {
	package require tls
	set timer [after 2000 "set x done"]
    }
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8829 \]"
    puts $f {
	proc accept {file addr port} {
	proc accept {sock addr port} {
            global x
            puts "[gets $file] $port"
            close $file
            puts "[gets $sock] $port"
            close $sock
            set x done
	}
	puts ready
	vwait x
	after cancel $timer
	close $f
    }

    set f [open script w]
    puts $f {
	package require tls
	set timer [after 2000 "set x done"]
    }
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8830 \]"
    puts $f {
	proc accept {file addr port} {
	proc accept {sock addr port} {
            global x
            puts "[gets $file] $addr"
            close $file
            puts "[gets $sock] $addr"
            close $sock
            set x done
	}
	puts ready
	vwait x
	after cancel $timer
	close $f
    }

    set f [open script w]
    puts $f {
	package require tls
	set timer [after 2000 "set x done"]
    }
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey -myaddr [info hostname] 8831 \]"
    puts $f {
	proc accept {file addr port} {
	proc accept {sock addr port} {
            global x
            puts "[gets $file]"
            close $file
            puts "[gets $sock]"
            close $sock
            set x done
	}
	puts ready
	vwait x
	after cancel $timer
	close $f
    }

    set f [open script w]
    puts $f {
	package require tls
	set timer [after 2000 "set x done"]
    }
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8832 \]"
    puts $f {
	proc accept {file addr port} {
	proc accept {sock addr port} {
            global x
            puts "[gets $file]"
            close $file
            puts "[gets $sock]"
            close $sock
            set x done
	}
	puts ready
	vwait x
	after cancel $timer
	close $f
    }

    removeFile script
    set f [open script w]
    puts -nonewline $f {package require tls; tls::socket -server accept 8828}
    close $f
    set f [open "|[list $::tcltest::tcltest script]" r]
    gets $f
    after 100
    set x [list [catch {close $f} msg] $msg]
    set x [list [catch {close $f} msg] [string range $msg 0 43]]
    close $s
    set x
} {1 {couldn't open socket: address already in use
} {1 {couldn't open socket: address already in use}}
    while executing
"::socket -server {tls::_accept {-server 1} accept} 8828"
    ("eval" body line 1)
    invoked from within
"eval ::socket $sopts"
    (procedure "tls::socket" line 62)
    invoked from within
"tls::socket -server accept 8828"
    (file "script" line 1)}}

test tlsIO-2.10 {close on accept, accepted socket lives} {socket knownBug} {
test tlsIO-2.10 {close on accept, accepted socket lives} {socket} {
    set done 0
    set timer [after 20000 "set done timed_out"]
    set ss [tls::socket -server accept -certfile $serverCert -cafile $caCert \
	-keyfile $serverKey 8830]
    proc accept {s a p} {
	global ss
	close $ss

    close $cs

    vwait done
    after cancel $timer
    set done
} 1

test tlsIO-2.11 {detecting new data} {socket knownBug} {
test tlsIO-2.11 {detecting new data} {socket} {
    proc accept {s a p} {
	global sock
	# when doing an in-process client/server test, both sides need
	# to be non-blocking for the TLS handshake.  Also make sure
	# to return the channel to line buffering mode.
	fconfigure $s -blocking 0 -buffering line
	set sock $s
	set f [open awb.log w]
	puts $f [catch {tls::handshake $sock} err]
	fileevent $s readable [list do_handshake $s]
	puts $f "err: $err"
	puts $f "[tls::status $sock]"
	close $s
    }

    set s [tls::socket -require 0 -request 0 -server accept -certfile $serverCert -cafile $caCert \
	-keyfile $serverKey 8400]
    set s [tls::socket -server accept \
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey 8400]
    set sock ""
    set s2 [tls::socket -certfile $clientCert -cafile $caCert \
	-keyfile $clientKey 127.0.0.1 8400]
    # when doing an in-process client/server test, both sides need
    # to be non-blocking for the TLS handshake  Also make sure to
    # return the channel to line buffering mode (TLS sets it to 'none').
    fconfigure $s2 -blocking 0 -buffering line
    vwait sock
    puts $s2 one
    flush $s2
    # need update to complete TLS handshake in-process
    update
    after 500
    fconfigure $sock -blocking 0
    set result [gets $sock]
    lappend result [gets $sock]
    set result a:[gets $sock]
    lappend result b:[gets $sock]
    fconfigure $sock -blocking 1
    puts $s2 two
    flush $s2
    fconfigure $sock -blocking 0
    lappend result [gets $sock]
    lappend result c:[gets $sock]
    fconfigure $sock -blocking 1
    close $s2
    close $s
    close $sock
    set result
} {one {} two}
} {a:one b: c:two}

test tlsIO-2.12 {tcp connection; no certificates specified} {socket stdio pcCrash} {
test tlsIO-2.12 {tcp connection; no certificates specified} \
	{socket stdio unixOnly} {
    # There is a debug assertion on Windows/SSL that causes a crash when the
    # certificate isn't specified.
    removeFile script
    set f [open script w]
    puts $f {
    	package require tls
	set timer [after 2000 "set x timed_out"]
	set f [tls::socket -server accept 8828]
	proc accept {file addr port} {

    close $s3
    lappend x [gets $f]
    close $f
    set x
} {ready done}

test tlsIO-4.1 {server with several clients} {socket stdio} {
    # have seen intermittent hangs on Windows
    removeFile script
    set f [open script w]
    puts $f {
    	package require tls
	gets stdin
    }
    puts $f "set s \[tls::socket -certfile $clientCert -cafile $caCert -keyfile $clientKey 127.0.0.1 8828 \]"

        }
    }
    set t1 [after 30000 "set x timed_out"]
    set t2 [after 31000 "set x timed_out"]
    set t3 [after 32000 "set x timed_out"]
    set s [tls::socket \
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey \
    	-server accept 8828]
	    -server accept 8828]
    puts $p1 open
    puts $p2 open
    puts $p3 open
    vwait x
    vwait x
    vwait x
    after cancel $t1

    if {![catch {tls::socket -server dodo 21} msg]} {
	set x {htons problem, should be disallowed, are you running as SU?}
	close $msg
    }
    set x
} {couldn't open socket: not owner}

test tlsIO-6.1 {accept callback error} {unexplainedFailure socket stdio pcCrash} {
test tlsIO-6.1 {accept callback error} {socket stdio} {
    # There is a debug assertion on Windows/SSL that causes a crash when the
    # certificate isn't specified.
    removeFile script
    set f [open script w]
    puts $f {
    	package require tls
	gets stdin
	tls::socket 127.0.0.1 8848
    }
    puts $f [list tls::socket -cafile $caCert 127.0.0.1 8848]
    close $f
    set f [open "|[list $::tcltest::tcltest script]" r+]
    proc bgerror args {
	global x
	set x $args
    }
    proc accept {s a p} {expr 10 / 0}
    set s [tls::socket -server accept 8848]
    set s [tls::socket -server accept \
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey 8848]
    puts $f hello
    close $f
    set timer [after 10000 "set x timed_out"]
    vwait x
    after cancel $timer
    close $s
    rename bgerror {}
    set x
} {{divide by zero}}

# bug report #5812 fconfigure doesn't return value for '-peername'

test tlsIO-7.1 {testing socket specific options} {knownBug socket stdio} {
test tlsIO-7.1 {testing socket specific options} {socket stdio} {
    removeFile script
    set f [open script w]
    puts $f {
	package require tls
    }
    puts $f [list tls::socket -server accept \
    puts $f "tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8820"
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey 8820]
    puts $f {
	proc accept args {
	    global x
	    set x done
	}
	puts ready
	set timer [after 10000 "set x timed_out"]

    close $f
    set l ""
    lappend l [string compare [lindex $p 0] 127.0.0.1]
    lappend l [string compare [lindex $p 2] 8820]
    lappend l [llength $p]
} {0 0 3}

# bug report #5812 fconfigure doesn't return value for '-sockname'

test tlsIO-7.2 {testing socket specific options} {knownBug socket stdio} {
test tlsIO-7.2 {testing socket specific options} {socket stdio} {
    removeFile script
    set f [open script w]
    puts $f {
	package require tls
    }
    puts $f "tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8821"
    puts $f {

    close $s
    update
    llength $l
} 12

# bug report #5812 fconfigure doesn't return value for '-sockname'

test tlsIO-7.4 {testing socket specific options} {knownBug socket} {
test tlsIO-7.4 {testing socket specific options} {socket} {
    set s [tls::socket \
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
    	-server accept 8823]
    proc accept {s a p} {
	global x
	set x [fconfigure $s -sockname]
	close $s

    close $s1
    set l ""
    lappend l [lindex $x 2] [llength $x]
} {8823 3}

# bug report #5812 fconfigure doesn't return value for '-sockname'

test tlsIO-7.5 {testing socket specific options} {knownBug socket unixOrPc} {
test tlsIO-7.5 {testing socket specific options} {socket unixOrPc} {
    set s [tls::socket \
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
    	-server accept 8829]
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey \
	    -server accept 8829]
    proc accept {s a p} {
	global x
	set x [fconfigure $s -sockname]
	close $s
    }
    set s1 [tls::socket \
	-certfile $clientCert -cafile $caCert -keyfile $clientKey \
    	127.0.0.1 8829]
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    127.0.0.1 8829]
    set timer [after 10000 "set x timed_out"]
    vwait x
    after cancel $timer
    close $s
    close $s1
    set l ""
    lappend l [lindex $x 0] [lindex $x 2] [llength $x]
} {127.0.0.1 8829 3}

test tlsIO-8.1 {testing -async flag on sockets} {unexplainedHang socket} {
    # test seems to hang -- awb 6/2/2000
    # NOTE: This test may fail on some Solaris 2.4 systems. If it does,
    # check that you have these patches installed (using showrev -p):
test tlsIO-8.1 {testing -async flag on sockets} {socket} {
    # HOBBS: still fails post-rewrite
    # NOTE: This test may fail on some Solaris 2.4 systems.
    # See notes in Tcl's socket.test.
    #
    # 101907-05, 101925-02, 101945-14, 101959-03, 101969-05, 101973-03,
    # 101977-03, 101981-02, 101985-01, 102001-03, 102003-01, 102007-01,
    # 102011-02, 102024-01, 102039-01, 102044-01, 102048-01, 102062-03,
    # 102066-04, 102070-01, 102105-01, 102153-03, 102216-01, 102232-01,
    # 101878-03, 101879-01, 101880-03, 101933-01, 101950-01, 102030-01,
    # 102057-08, 102140-01, 101920-02, 101921-09, 101922-07, 101923-03
    #
    # If after installing these patches you are still experiencing a
    # problem, please email jyl@eng.sun.com. We have not observed this
    # failure on Solaris 2.5, so another option (instead of installing
    # these patches) is to upgrade to Solaris 2.5.
    set s [tls::socket \
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
    	-server accept 8830]
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey \
	    -server accept 8830]
    proc accept {s a p} {
	global x
	# when doing an in-process client/server test, both sides need
	# to be non-blocking for the TLS handshake.  Also make sure
	# to return the channel to line buffering mode.
	fconfigure $s -blocking 0 -buffering line
	puts $s bye
	close $s
	set x done
    }
    set s1 [tls::socket \
	-certfile $clientCert -cafile $caCert -keyfile $clientKey \
	-async [info hostname] 8830]
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    -async [info hostname] 8830]
    # when doing an in-process client/server test, both sides need
    # to be non-blocking for the TLS handshake  Also make sure to
    # return the channel to line buffering mode (TLS sets it to 'none').
    fconfigure $s1 -blocking 0 -buffering line
    vwait x
    # TLS handshaking needs one byte from the client...
    puts $s1 a
    # need update to complete TLS handshake in-process
    update
    set z [gets $s1]
    close $s
    close $s1
    set z
} bye

test tlsIO-9.1 {testing spurious events} {unexplainedHang socket} {
test tlsIO-9.1 {testing spurious events} {socket} {
    # locks up 
    set len 0
    set spurious 0
    set done 0
    proc readlittle {s} {
	global spurious done len
	set l [read $s 1]
	if {[string length $l] == 0} {
	    if {![eof $s]} {
		incr spurious
	    } else {
		close $s
		set done 1
	    }
	} else {
	    incr len [string length $l]
	}
    }
    proc accept {s a p} {
	fconfigure $s -buffering none -blocking off
	fileevent $s readable [list readlittle $s]
	fconfigure $s -blocking 0
	fileevent $s readable [list do_handshake $s readable readlittle \
		-buffering none]
    }
    set s [tls::socket \
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
   	-server accept 8831]
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey \
	    -server accept 8831]
    set c [tls::socket \
	-certfile $clientCert -cafile $caCert -keyfile $clientKey \
    	[info hostname] 8831]
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    [info hostname] 8831]
    # This differs from socket-9.1 in that both sides need to be
    # non-blocking because of TLS' required handshake
    fconfigure $c -blocking 0
    puts -nonewline $c 01234567890123456789012345678901234567890123456789
    close $c
    set timer [after 10000 "set done timed_out"]
    vwait done
    after cancel $timer
    close $s
    list $spurious $len
} {0 50}

test tlsIO-9.2 {testing async write, fileevents, flush on close} {socket} {
    set firstblock ""
    set firstblock [string repeat a 31]
    for {set i 0} {$i < 5} {incr i} {set firstblock "a$firstblock$firstblock"}
    set secondblock ""
    set secondblock [string repeat b 65535]
    for {set i 0} {$i < 16} {incr i} {
	set secondblock "b$secondblock$secondblock"
    }
    set l [tls::socket \
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
    	-server accept 8832]
    proc accept {s a p} {
	fconfigure $s -blocking 0 -translation lf -buffersize 16384 \
	fconfigure $s -blocking 0
		-buffering line
	fileevent $s readable "readable $s"
	fileevent $s readable [list do_handshake $s readable readable \
		-translation lf -buffersize 16384 -buffering line]
    }
    proc readable {s} {
	set l [gets $s]
	dputs "got \"[string replace $l 10 end-3 ...]\" \
		([string length $l]) from $s"
	fileevent $s readable {}
	after 1000 respond $s
    }
    proc respond {s} {
	global firstblock
	dputs "send \"[string replace $firstblock 10 end-3 ...]\" \
		([string length $firstblock]) down $s"
	puts -nonewline $s $firstblock
	after 1000 writedata $s
    }
    proc writedata {s} {
	global secondblock
	dputs "send \"[string replace $secondblock 10 end-3 ...]\" \
		([string length $secondblock]) down $s"
	puts -nonewline $s $secondblock
	close $s
    }
    set s [tls::socket \
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey \
	    -server accept 8832]
    set c [tls::socket \
	-certfile $clientCert -cafile $caCert -keyfile $clientKey \
    	[info hostname] 8832]
    fconfigure $s -blocking 0 -trans lf -buffering line
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    [info hostname] 8832]
    fconfigure $c -blocking 0 -trans lf -buffering line
    set count 0
    puts $s hello
    puts $c hello
    proc readit {s} {
	global count done
	set l [read $s]
	incr count [string length $l]
	set data [read $s]
	dputs "read \"[string replace $data 10 end-3 ...]\" \
		([string length $data]) from $s"
	incr count [string length $data]
	if {[eof $s]} {
	    close $s
	    set done 1
	}
    }
    fileevent $s readable "readit $s"
    fileevent $c readable "readit $c"
    set done 0
    set timer [after 10000 "set done timed_out"]
    vwait done
    after cancel $timer
    close $l
    set count
} 65566
    close $s
    list $count $done
} {65566 1}

test tlsIO-9.3 {testing EOF stickyness} {unexplainedHang socket} {
    # hangs
test tlsIO-9.3 {testing EOF stickyness} {unexplainedFailure socket} {
    # HOBBS: never worked correctly
    proc count_to_eof {s} {
	global count done timer
	set l [gets $s]
	if {[eof $s]} {
	    incr count
	    if {$count > 9} {
		close $s

    set count 0
    set done false
    proc write_then_close {s} {
	puts $s bye
	close $s
    }
    proc accept {s a p} {
	fconfigure $s -buffering line -translation lf
	fileevent $s writable "write_then_close $s"
	fconfigure $s -blocking 0 -buffering line -translation lf
	fileevent $s writable [list do_handshake $s writable write_then_close \
		-buffering line -translation lf]
    }
    set s [tls::socket \
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
    	-server accept 8833]
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey \
	    -server accept 8833]
    set c [tls::socket \
	-certfile $clientCert -cafile $caCert -keyfile $clientKey \
    	[info hostname] 8833]
    fconfigure $c -blocking off -buffering line -translation lf
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    [info hostname] 8833]
    fconfigure $c -blocking 0 -buffering line -translation lf
    fileevent $c readable "count_to_eof $c"
    set timer [after 1000 timerproc]
    set timer [after 2000 timerproc]
    vwait done
    close $s
    set count
} {eof is sticky}

removeFile script

test tlsIO-10.1 {testing socket accept callback error handling} {socket} {
    set goterror 0
    proc bgerror args {global goterror; set goterror 1}
    set s [tls::socket \
    set s [tls::socket -cafile $caCert -server accept 8898]
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
    	-server accept 8898]
    proc accept {s a p} {close $s; error}
    set c [tls::socket \
    set c [tls::socket -cafile $caCert 127.0.0.1 8898]
	-certfile $clientCert -cafile $caCert -keyfile $clientKey \
	127.0.0.1 8898]
    vwait goterror
    close $s
    close $c
    set goterror
} 1

test tlsIO-11.1 {tcp connection} {socket doTestsWithRemoteServer} {
    sendCommand "set caCert $caCert"
    sendCertValues
    sendCommand "set serverCert $serverCert"
    sendCommand "set clientCert $clientCert"
    sendCommand "set serverKey $serverKey"
    sendCommand "set clientKey $clientKey"
    sendCommand {
	set socket9_1_test_server [tls::socket -server accept \
		-certfile $serverCert \
		-certfile $serverCert -cafile $caCert -keyfile $serverKey 8834]
		-cafile $caCert \
		-keyfile $serverKey \
		8834]
	proc accept {s a p} {
	    puts $s done
	    tls::handshake $s
	    puts $s done
	    close $s
	}
    }
    set s [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIP 8834]
    set r [gets $s]
    close $s
    sendCommand {close $socket9_1_test_server}
    set r
} done

test tlsIO-11.2 {client specifies its port} {socket doTestsWithRemoteServer} {
    sendCommand "set caCert $caCert"
    sendCommand "set serverCert $serverCert"
    sendCommand "set clientCert $clientCert"
    sendCommand "set serverKey $serverKey"
    sendCommand "set clientKey $clientKey"
    if {[info exists port]} {
	incr port
    } else {
	set port [expr $tlsServerPort + [pid]%1024]
    }
    sendCertValues
    sendCommand {
	set socket9_2_test_server [tls::socket -server accept \
		-certfile $serverCert \
		-certfile $serverCert -cafile $caCert -keyfile $serverKey 8835]
		-cafile $caCert \
		-keyfile $serverKey \
	    8835]
	proc accept {s a p} {
	    tls::handshake $s
	    puts $s $p
	    close $s
	}
    }
    set s [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    -myport $port $remoteServerIP 8835]
    set r [gets $s]
    close $s
    sendCommand {close $socket9_2_test_server}
    if {$r == $port} {
	set result ok
    } else {
	set result broken
    }
    set result
} ok

test tlsIO-11.3 {trying to connect, no server} {socket doTestsWithRemoteServer} {
    set status ok
    if {![catch {set s [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIp 8836]}]} {
	if {![catch {gets $s}]} {
	    set status broken
	}
	close $s
    }
    set status
} ok

test tlsIO-11.4 {remote echo, one line} {socket doTestsWithRemoteServer} {
    sendCommand "set caCert $caCert"
    sendCertValues
    sendCommand "set serverCert $serverCert"
    sendCommand "set clientCert $clientCert"
    sendCommand "set serverKey $serverKey"
    sendCommand "set clientKey $clientKey"
    sendCommand {
    	global serverCert
	global caCert
	global serverKey
	set socket10_6_test_server [tls::socket \
		-certfile $serverCert \
		-certfile $serverCert -cafile $caCert -keyfile $serverKey \
		-cafile $caCert \
		-keyfile $serverKey \
		-server accept 8836]
	proc accept {s a p} {
	    tls::handshake $s
	    fileevent $s readable [list echo $s]
	    fconfigure $s -buffering line -translation crlf
	}
	proc echo {s} {

    set r [gets $f]
    close $f
    sendCommand {close $socket10_6_test_server}
    set r
} hello

test tlsIO-11.5 {remote echo, 50 lines} {socket doTestsWithRemoteServer} {
    sendCommand "set caCert $caCert"
    sendCertValues
    sendCommand "set serverCert $serverCert"
    sendCommand "set clientCert $clientCert"
    sendCommand "set serverKey $serverKey"
    sendCommand "set clientKey $clientKey"
    sendCommand {
	set socket10_7_test_server [tls::socket -server accept \
		-certfile $serverCert \
		-certfile $serverCert -cafile $caCert -keyfile $serverKey 8836]
		-cafile $caCert \
		-keyfile $serverKey \
		8836]
	proc accept {s a p} {
	    tls::handshake $s
	    fileevent $s readable [list echo $s]
	    fconfigure $s -buffering line -translation crlf
	}
	proc echo {s} {
	    set l [gets $s]

	close $s2
    }
    close $s1
    set result
} $conflictResult

test tlsIO-11.7 {server with several clients} {socket doTestsWithRemoteServer} {
    sendCertValues
    sendCommand {
	set socket10_9_test_server [tls::socket \
		-certfile [file join [pwd] certs server.pem] \
		-certfile $serverCert -cafile $caCert -keyfile $serverKey \
		-cafile [file join [pwd] certs caFile.pem] \
		-keyfile [file join [pwd] certs skey.pem] \
		-server accept 8836]
	proc accept {s a p} {
	    # handshake locks up the three synchronous clients
	    # tls::handshake $s
	    fconfigure $s -buffering line
	    fileevent $s readable [list echo $s]
	}
	proc echo {s} {
	    set l [gets $s]
	    if {[eof $s]} {
		close $s

    close $s1
    close $s2
    close $s3
    sendCommand {close $socket10_9_test_server}
    set i
} 100    

test tlsIO-11.8 {client with several servers} {unexplainedHang socket doTestsWithRemoteServer} {
    # this one seems to hang -- awb 6/2/2000
test tlsIO-11.8 {client with several servers} {socket doTestsWithRemoteServer} {
    sendCertValues
    sendCommand {
	set s1 [tls::socket \
		-certfile [file join [pwd] certs server.pem] \
	tls::init -certfile $serverCert -cafile $caCert -keyfile $serverKey
		-cafile [file join [pwd] certs caFile.pem] \
		-keyfile [file join [pwd] certs skey.pem] \
		-server "accept 4003" 4003]
	set s2 [tls::socket \
	set s1 [tls::socket -server "accept 4003" 4003]
	set s2 [tls::socket -server "accept 4004" 4004]
		-certfile [file join [pwd] certs server.pem] \
		-cafile [file join [pwd] certs caFile.pem] \
		-keyfile [file join [pwd] certs skey.pem] \
		-server "accept 4004" 4004]
	set s3 [tls::socket \
	set s3 [tls::socket -server "accept 4005" 4005]
		-certfile [file join [pwd] certs server.pem] \
		-cafile [file join [pwd] certs caFile.pem] \
		-keyfile [file join [pwd] certs skey.pem] \
		-server "accept 4005" 4005]
	proc accept {mp s a p} {
	    tls::handshake $s
	    puts $s $mp
	    close $s
	}
    }
    set s1 [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIP 4003]
    set s2 [tls::socket \
	proc handshake {s mp} {
	    if {[eof $s]} {
		close $s
	    } elseif {[catch {tls::handshake $s} result]} {
		# Some errors are normal.
	    } elseif {$result == 1} {
		# Handshake complete
		fileevent $s readable ""
		puts $s $mp
		close $s
	    }
	}
	proc accept {mp s a p} {
	    # These have to accept non-blocking, because the handshaking
	    # order isn't deterministic
	    fconfigure $s -blocking 0 -buffering line
	    fileevent $s readable [list handshake $s $mp]
	}
    }
    tls::init -certfile $clientCert -cafile $caCert -keyfile $clientKey
    set s1 [tls::socket $remoteServerIP 4003]
    set s2 [tls::socket $remoteServerIP 4004]
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIP 4004]
    set s3 [tls::socket \
    set s3 [tls::socket $remoteServerIP 4005]
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIP 4005]
    set l ""
    lappend l [gets $s1] [gets $s1] [eof $s1] [gets $s2] [gets $s2] [eof $s2] \
	[gets $s3] [gets $s3] [eof $s3]
    close $s1
    close $s2
    close $s3
    sendCommand {
	close $s1
	close $s2
	close $s3
    }
    set l
} {4003 {} 1 4004 {} 1 4005 {} 1}

test tlsIO-11.9 {accept callback error} {knownBug socket doTestsWithRemoteServer} {
test tlsIO-11.9 {accept callback error} {socket doTestsWithRemoteServer} {
    set s [tls::socket \
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey \
	    -server accept 8836]
    proc accept {s a p} {expr 10 / 0}
    proc bgerror args {
	global x
	set x $args
    }
    sendCommand "set caCert $caCert"
    sendCertValues
    sendCommand "set serverCert $serverCert"
    sendCommand "set clientCert $clientCert"
    sendCommand "set serverKey $serverKey"
    sendCommand "set clientKey $clientKey"
    if {[catch {sendCommand {
	    set peername [fconfigure $callerSocket -peername]
	    set s [tls::socket \
		-certfile $clientCert \
		    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
		-cafile $caCert \
		-keyfile $clientKey \
	    	[lindex $peername 0] 8836]
		    [lindex $peername 0] 8836]
	    close $s
    	 }} msg]} {
	close $s
	error $msg
    }
    set timer [after 10000 "set x timed_out"]
    vwait x
    after cancel $timer
    close $s
    rename bgerror {}
    set x
} {{divide by zero}}

test tlsIO-11.10 {testing socket specific options} {unexplainedFailure socket doTestsWithRemoteServer} {
    sendCommand "set caCert $caCert"
test tlsIO-11.10 {testing socket specific options} {socket doTestsWithRemoteServer} {
    sendCertValues
    sendCommand "set serverCert $serverCert"
    sendCommand "set clientCert $clientCert"
    sendCommand "set serverKey $serverKey"
    sendCommand "set clientKey $clientKey"
    sendCommand {
	set socket10_12_test_server [tls::socket \
		-certfile $serverCert \
		-certfile $serverCert -cafile $caCert -keyfile $serverKey \
		-cafile $caCert \
		-keyfile $serverKey \
		-server accept 8836]
	proc accept {s a p} {close $s}
    }
    set s [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIP 8836]
    set p [fconfigure $s -peername]
    set n [fconfigure $s -sockname]
    set l ""
    lappend l [lindex $p 2] [llength $p] [llength $p]
    close $s
    sendCommand {close $socket10_12_test_server}
    set l
} {8836 3 3}

test tlsIO-11.11 {testing spurious events} {unexplainedHang socket doTestsWithRemoteServer} {
    # hangs
    sendCommand "set caCert $caCert"
test tlsIO-11.11 {testing spurious events} {socket doTestsWithRemoteServer} {
    # remote equivalent of 9.1
    sendCertValues
    sendCommand "set serverCert $serverCert"
    sendCommand "set clientCert $clientCert"
    sendCommand "set serverKey $serverKey"
    sendCommand "set clientKey $clientKey"
    sendCommand {
	set socket10_13_test_server [tls::socket \
		-certfile $serverCert \
		-cafile $caCert \
		-keyfile $serverKey \
		-server accept 8836]
	set socket_test_server [tls::socket -server accept \
		-certfile $serverCert -cafile $caCert -keyfile $serverKey 8836]
	proc handshake {s} {
	    if {[eof $s]} {
		close $s
	    } elseif {[catch {tls::handshake $s} result]} {
		# Some errors are normal.
	    } elseif {$result == 1} {
		# Handshake complete
		fileevent $s writable ""
		after 100 writesome $s
	    }
	}
	proc accept {s a p} {
	    tls::handshake $s
	    fconfigure $s -translation "auto lf"
	    after 100 writesome $s
	    fileevent $s writable [list handshake $s]
	}
	proc writesome {s} {
	    for {set i 0} {$i < 100} {incr i} {
		puts $s "line $i from remote server"
	    }
	    close $s
	}

	} else {
	    incr len [string length $l]
	}
    }
    set c [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIP 8836]
    # Get the buffering corrected
    fconfigure $c -buffering line
    # Put a byte into the client pipe to trigger TLS handshaking
    puts $c a
    fileevent $c readable "readlittle $c"
    fileevent $c readable [list readlittle $c]
    set timer [after 10000 "set done timed_out"]
    vwait done
    after cancel $timer
    sendCommand {close $socket10_13_test_server}
    sendCommand {close $socket_test_server}
    list $spurious $len
} {0 2690}

test tlsIO-11.12 {testing EOF stickyness} {knownBug socket doTestsWithRemoteServer} {
test tlsIO-11.12 {testing EOF stickyness} {unexplainedFailure socket doTestsWithRemoteServer} {
    # remote equivalent of 9.3
    # HOBBS: never worked correctly
    set counter 0
    set done 0
    proc count_up {s} {
	global counter done after_id
	set l [gets $s]
	if {[eof $s]} {
	    incr counter
	    if {$counter > 9} {
		set done {EOF is sticky}
		after cancel $after_id
		close $s
	    }
	}
    }
    proc timed_out {} {
	global c done
	set done {timed_out, EOF is not sticky}
	close $c
    }
    sendCommand "set caCert $caCert"
    sendCertValues
    sendCommand "set serverCert $serverCert"
    sendCommand "set clientCert $clientCert"
    sendCommand "set serverKey $serverKey"
    sendCommand "set clientKey $clientKey"
    sendCommand {
	set socket10_14_test_server [tls::socket \
		-certfile $serverCert \
		-certfile $serverCert -cafile $caCert -keyfile $serverKey \
		-cafile $caCert \
		-keyfile $serverKey \
		-server accept 8836]
	proc accept {s a p} {
	    tls::handshake $s
	    after 100 close $s
	}
    }
    set c [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
    	$remoteServerIP 8836]
	    $remoteServerIP 8836]
    fileevent $c readable "count_up $c"
    set after_id [after 1000 timed_out]
    vwait done
    sendCommand {close $socket10_14_test_server}
    set done
} {EOF is sticky}

test tlsIO-11.13 {testing async write, async flush, async close} \
	{socket doTestsWithRemoteServer} {
    proc readit {s} {
	global count done
	set l [read $s]
	incr count [string length $l]
	if {[eof $s]} {
	    close $s
	    set done 1
	}
    }
    sendCommand "set caCert $caCert"
    sendCertValues
    sendCommand "set serverCert $serverCert"
    sendCommand "set clientCert $clientCert"
    sendCommand "set serverKey $serverKey"
    sendCommand "set clientKey $clientKey"
    sendCommand {
	set firstblock ""
	set firstblock [string repeat a 31]
	for {set i 0} {$i < 5} {incr i} {
		set firstblock "a$firstblock$firstblock"
	}
	set secondblock ""
	set secondblock [string repeat b 65535]
	for {set i 0} {$i < 16} {incr i} {
	    set secondblock "b$secondblock$secondblock"
	}
	set l [tls::socket \
		-certfile $serverCert \
		-certfile $serverCert -cafile $caCert -keyfile $serverKey \
		-cafile $caCert \
		-keyfile $serverKey \
		-server accept 8845]
	proc accept {s a p} {
	    tls::handshake $s
	    fconfigure $s -blocking 0 -translation lf -buffersize 16384 \
		-buffering line
		    -buffering line
	    fileevent $s readable "readable $s"
	}
	proc readable {s} {
	    set l [gets $s]
	    fileevent $s readable {}
	    after 1000 respond $s
	}
	proc respond {s} {
	    global firstblock
	    puts -nonewline $s $firstblock
	    after 1000 writedata $s
	}
	proc writedata {s} {
	    global secondblock
	    puts -nonewline $s $secondblock
	    close $s
	}
    }
    set s [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
    	$remoteServerIP 8845]
    fconfigure $s -blocking 0 -trans lf -buffering line
	    $remoteServerIP 8845]
    fconfigure $s -blocking 0 -translation lf -buffering line
    set count 0
    puts $s hello
    fileevent $s readable "readit $s"
    set timer [after 10000 "set done timed_out"]
    vwait done
    after cancel $timer
    sendCommand {close $l}
    set count
} 65566

test tlsIO-12.1 {testing inheritance of server sockets} \
test tlsIO-12.1 {testing inheritance of server sockets} {socket exec} {
	{socket doTestsWithRemoteServer} {
    removeFile script1
    removeFile script2
    makeFile {} script1
    makeFile {} script2

    # Script1 is just a 10 second delay.  If the server socket
    # is inherited, it will be held open for 10 seconds

    set f [open script1 w]
    puts $f {
	after 10000 exit
	vwait forever
    }
    close $f

    # Script2 creates the server socket, launches script1,
    # waits a second, and exits.  The server socket will now
    # be closed unless script1 inherited it.

    set f [open script2 w]
    # puts $f [list set tcltest $::tcltest::tcltest]
    puts $f [list set tclsh [info nameofexecutable]]
    puts $f [list set tclsh $::tcltest::tcltest]
    puts $f {
	package require tcltest
	package require tls
    puts $f {package require tls}
    }
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8828 \]"
    puts $f "set f \[tls::socket -server accept \
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey 8828\]"
    puts $f {
	proc accept { file addr port } {
	    close $file
	}
	# exec $::tcltest::tcltest script1 &
	exec $tclsh script1 &
	close $f
	after 1000 exit
	vwait forever
    }
    close $f
	
    # Launch script2 and wait 5 seconds

    # exec $::tcltest::tcltest script2 &
    exec $::tcltest::tcltest script2 &
    exec [info nameofexecutable] script2 &
    after 5000 { set ok_to_proceed 1 }
    vwait ok_to_proceed

    # If we can still connect to the server, the socket got inherited.

    if {[catch {tls::socket \
	-certfile $clientCert -cafile $caCert -keyfile $clientKey \
   	 127.0.0.1 8828} msg]} {
	set x {server socket was not inherited}
    } else {
	close $msg
	set x {server socket was inherited}
    }

    removeFile script1
    removeFile script2
    set x
} {server socket was not inherited}

test tlsIO-12.2 {testing inheritance of client sockets} \
test tlsIO-12.2 {testing inheritance of client sockets} {socket exec} {
	{unexplainedFailure socket doTestsWithRemoteServer} {
    removeFile script1
    removeFile script2
    makeFile {} script1
    makeFile {} script2

    # Script1 is just a 10 second delay.  If the server socket
    # is inherited, it will be held open for 10 seconds

    set f [open script1 w]
    puts $f {
	after 10000 exit
	vwait forever
    }
    close $f

    # Script2 opens the client socket and writes to it.  It then
    # launches script1 and exits.  If the child process inherited the
    # client socket, the socket will still be open.

    set f [open script2 w]
    puts $f [list set tclsh [info nameofexecutable]]
    puts $f [list set tclsh $::tcltest::tcltest]
    puts $f {
    	package require tls
    puts $f {package require tls}
    }
    puts $f "set f \[tls::socket -certfile $clientCert -cafile $caCert -keyfile $clientKey 127.0.0.1 8829 \]"
    puts $f "set f \[tls::socket -certfile $clientCert -cafile $caCert \
	    -keyfile $clientKey 127.0.0.1 8829\]"
    puts $f {
	exec $tclsh script1 &
	puts $f testing
	flush $f
	after 1000 exit
	vwait forever
    }
    close $f

    # Create the server socket

    set server [tls::socket \
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
	-server accept 8829]
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey \
	    -server accept 8829]
    proc accept { file host port } {

	# When the client connects, establish the read handler
	global server
	close $server
	fconfigure $file -blocking 0
	fileevent $file readable [list getdata $file]
	fconfigure $file -buffering line -blocking 0
	fileevent $file readable [list do_handshake $file readable getdata \
		-buffering line]
	return
    }
    proc getdata { file } {

	# Read handler on the accepted socket.
	global x
	global failed
	set status [catch {read $file} data]
	if {$status != 0} {
	    set x {read failed, error was $data}
	    catch { close $file }

    # script1 process must have inherited the client.

    set failed 0
    after 5000 [list set failed 1]

    # Launch the script2 process

    exec [info nameofexecutable] script2 &
    exec $::tcltest::tcltest script2 &

    vwait x
    if {!$failed} {
	vwait failed
    }
    removeFile script1
    removeFile script2
    set x
} {client socket was not inherited}

test tlsIO-12.3 {testing inheritance of accepted sockets} \
	{hangsOnLinux socket doTestsWithRemoteServer} {
	{socket exec unixOnly} {
    # hangs on Linux
    removeFile script1
    removeFile script2
    makeFile {} script1
    makeFile {} script2

    set f [open script1 w]
    puts $f {
	after 10000 exit
	vwait forever
    }
    close $f

    set f [open script2 w]
    puts $f [list set tclsh [info nameofexecutable]]
    puts $f [list set tclsh $::tcltest::tcltest]
    puts $f {
    	package require tls
    puts $f {package require tls}
    }
    puts $f "catch {set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8930 \]}"
    puts $f "set f \[tls::socket -server accept \
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey 8930\]"
    puts $f {
	proc accept { file host port } {
	    global tclsh
	    fconfigure $file -buffering line
	    puts $file {test data on socket}
	    exec $tclsh script1 &
	    after 1000 exit
	}
	catch {vwait forever}
	vwait forever
    }
    close $f

    # Launch the script2 process and connect to it.  See how long
    # the socket stays open

    exec [info nameofexecutable] script2 &
    exec $::tcltest::tcltest script2 &

    after 1000 set ok_to_proceed 1
    after 2000 set ok_to_proceed 1
    vwait ok_to_proceed

    set f [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    127.0.0.1 8930]
    fconfigure $f -buffering full -blocking 0
    # We need to put a byte into the read queue, otherwise the
    # TLS handshake doesn't finish
    puts $f a; flush $f
    fileevent $f readable [list getdata $f]

    # If the socket is still open after 5 seconds, the script1 process
    # must have inherited the accepted socket.

    set failed 0
    after 5000 set failed 1

    proc getdata { file } {

	# Read handler on the client socket.
	global x
	global failed
	set status [catch {read $file} data]
	if {$status != 0} {
	    set x {read failed, error was $data}
	    set x "read failed, error was $data"
	    catch { close $file }
	} elseif {[string compare {} $data]} {
	} elseif {[fblocked $file]} {
	} elseif {[eof $file]} {
	    if {$failed} {
		set x {accepted socket was inherited}
	    } else {
		set x {accepted socket was not inherited}
	    }
	    catch { close $file }
	} else {
	    set x {impossible case}
	    catch { close $file }
	}
	return
    }
    
    vwait x

    removeFile script1
    removeFile script2
    set x
} {accepted socket was not inherited}

test tlsIO-13.1 {Testing use of shared socket between two threads} \
	{socket testthread} {

    # HOBBS: never tested
    removeFile script
    threadReap

    makeFile {
    	package require tls
	set f [tls::socket -server accept 8828]
	proc accept {s a p} {

   flush $commandSocket
}
catch {close $commandSocket}
catch {close $remoteProcChan}
::tcltest::cleanupTests
flush stdout
return

/*
 * Copyright (C) 1997-1999 Matt Newman <matt@novadigm.com>
 *
 * $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tls.c,v 1.6 2000/06/06 01:34:11 welch Exp $
 * $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tls.c,v 1.7 2000/07/27 01:58:18 hobbs Exp $
 *
 * TLS (aka SSL) Channel - can be layered on any bi-directional
 * Tcl_Channel (Note: Requires Trf Core Patch)
 *
 * This was built (almost) from scratch based upon observation of
 * OpenSSL 0.9.2B
 *

 */

/*
 * Forward declarations
 */

#define F2N( key, dsp) \
	(((key) == NULL) ? (char *) NULL : \
	(((key) == NULL)?(char*)NULL:Tcl_TranslateFileName( interp, (key), (dsp)))
		Tcl_TranslateFileName(interp, (key), (dsp)))
#define REASON()	ERR_reason_error_string(ERR_get_error())

static int	CiphersObjCmd _ANSI_ARGS_ ((ClientData clientData, Tcl_Interp *interp,
			   int objc, Tcl_Obj *CONST objv[]));
static int	CiphersObjCmd _ANSI_ARGS_ ((ClientData clientData,
			Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]));

static int	HandshakeObjCmd _ANSI_ARGS_ ((ClientData clientData, Tcl_Interp *interp,
			   int objc, Tcl_Obj *CONST objv[]));
static int	HandshakeObjCmd _ANSI_ARGS_ ((ClientData clientData,
			Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]));

static int	ImportObjCmd _ANSI_ARGS_ ((ClientData clientData, Tcl_Interp *interp,
			   int objc, Tcl_Obj *CONST objv[]));
static int	ImportObjCmd _ANSI_ARGS_ ((ClientData clientData,
			Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]));

static int	StatusObjCmd _ANSI_ARGS_ ((ClientData clientData, Tcl_Interp *interp,
			   int objc, Tcl_Obj *CONST objv[]));
static int	StatusObjCmd _ANSI_ARGS_ ((ClientData clientData,
			Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]));
static SSL_CTX *CTX_Init _ANSI_ARGS_((Tcl_Interp *interp, int proto, char *key,
			    char *cert, char *CAdir, char *CAfile, char *ciphers));
			char *cert, char *CAdir, char *CAfile, char *ciphers));

#define TLS_PROTO_SSL2	0x01
#define TLS_PROTO_SSL3	0x02
#define TLS_PROTO_TLS1	0x04
#define ENABLED(flag, mask)	(((flag) & (mask)) == (mask))

/*
 * Static data structures
 */

#ifndef NO_DH
/* from openssl/apps/s_server.c */

 *	The err field of the currently operative State is set
 *	  to a string describing the SSL negotiation failure reason
 *-------------------------------------------------------------------
 */
static int
VerifyCallback(int ok, X509_STORE_CTX *ctx)
{
    Tcl_Obj *cmdPtr;
    char *errStr;
    SSL *ssl = (SSL*)X509_STORE_CTX_get_app_data(ctx);
    X509 *cert = X509_STORE_CTX_get_current_cert(ctx);
    State *statePtr = (State*)SSL_get_app_data(ssl);
    SSL   *ssl		= (SSL*)X509_STORE_CTX_get_app_data(ctx);
    X509  *cert		= X509_STORE_CTX_get_current_cert(ctx);
    State *statePtr	= (State*)SSL_get_app_data(ssl);
    Tcl_Obj *cmdPtr;
    int depth = X509_STORE_CTX_get_error_depth(ctx);
    int err = X509_STORE_CTX_get_error(ctx);
    int depth		= X509_STORE_CTX_get_error_depth(ctx);
    int err		= X509_STORE_CTX_get_error(ctx);
    char *errStr;

    dprintf(stderr, "Verify: %d\n", ok);

    if (!ok)
    if (!ok) {
	errStr = (char*)X509_verify_cert_error_string(err);
    else
    } else {
	errStr = (char *)0;

    }

    if (statePtr->callback == (Tcl_Obj*)NULL) {
	if (statePtr->vflags & SSL_VERIFY_FAIL_IF_NO_PEER_CERT)
	if (statePtr->vflags & SSL_VERIFY_FAIL_IF_NO_PEER_CERT) {
	    return ok;
	else
	} else {
	    return 1;
	}
    }
    cmdPtr = Tcl_DuplicateObj(statePtr->callback);

    Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, 
	    Tcl_NewStringObj( "verify", -1));

    Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, 

 */
void
Tls_Error(State *statePtr, char *msg)
{
    Tcl_Obj *cmdPtr;

    if (msg && *msg) {
	Tcl_SetErrorCode( statePtr->interp, "SSL", msg, (char *)NULL);
	Tcl_SetErrorCode(statePtr->interp, "SSL", msg, (char *)NULL);
    } else {
	msg = Tcl_GetStringFromObj(Tcl_GetObjResult(statePtr->interp), NULL);
    }
    statePtr->err = msg;

    if (statePtr->callback == (Tcl_Obj*)NULL) {
	char buf[BUFSIZ];
	sprintf(buf, "SSL channel \"%s\": error: %s",
	    Tcl_GetChannelName(statePtr->self), msg);
	Tcl_SetResult( statePtr->interp, buf, TCL_VOLATILE);
	Tcl_BackgroundError( statePtr->interp);
	return;
    }
    cmdPtr = Tcl_DuplicateObj(statePtr->callback);

    Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, 
	    Tcl_NewStringObj( "error", -1));
    Tcl_ListObjAppendElement(statePtr->interp, cmdPtr, 
	    Tcl_NewStringObj("error", -1));

    Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, 
	    Tcl_NewStringObj( Tcl_GetChannelName(statePtr->self), -1) );
    Tcl_ListObjAppendElement(statePtr->interp, cmdPtr, 
	    Tcl_NewStringObj(Tcl_GetChannelName(statePtr->self), -1));

    Tcl_ListObjAppendElement( statePtr->interp, cmdPtr,
	    Tcl_NewStringObj( msg, -1) );
    Tcl_ListObjAppendElement(statePtr->interp, cmdPtr,
	    Tcl_NewStringObj(msg, -1));

    Tcl_Preserve( (ClientData) statePtr->interp);
    Tcl_Preserve( (ClientData) statePtr);
    Tcl_Preserve((ClientData) statePtr->interp);
    Tcl_Preserve((ClientData) statePtr);

    Tcl_IncrRefCount( cmdPtr);
    Tcl_IncrRefCount(cmdPtr);
    if (Tcl_GlobalEvalObj(statePtr->interp, cmdPtr) != TCL_OK) {
	Tcl_BackgroundError( statePtr->interp);
	Tcl_BackgroundError(statePtr->interp);
    }
    Tcl_DecrRefCount( cmdPtr);
    Tcl_DecrRefCount(cmdPtr);

    Tcl_Release( (ClientData) statePtr);
    Tcl_Release( (ClientData) statePtr->interp);
    Tcl_Release((ClientData) statePtr);
    Tcl_Release((ClientData) statePtr->interp);
}

/*
 *-------------------------------------------------------------------
 *
 * PasswordCallback -- 
 *

		Tcl_AppendResult(interp, "protocol not supported", NULL);
		return TCL_ERROR;
#else
		ctx = SSL_CTX_new(TLSv1_method()); break;
#endif
    }
    if (ctx == NULL) {
	Tcl_AppendResult(interp, REASON(),
	Tcl_AppendResult(interp, REASON(), (char *) NULL);
	    (char *) NULL);
	return TCL_ERROR;
    }
    ssl = SSL_new(ctx);
    if (ssl == NULL) {
	Tcl_AppendResult(interp, REASON(),
	Tcl_AppendResult(interp, REASON(), (char *) NULL);
	    (char *) NULL);
	SSL_CTX_free(ctx);
	return TCL_ERROR;
    }
    objPtr = Tcl_NewListObj( 0, NULL);

    if (!verbose) {
	for (index = 0; ; index++) {

        return TCL_ERROR;
    }

    chan = Tcl_GetChannel(interp, Tcl_GetStringFromObj(objv[1], NULL), NULL);
    if (chan == (Tcl_Channel) NULL) {
        return TCL_ERROR;
    }
#ifdef TCL_CHANNEL_VERSION_2
    /*
     * Make sure to operate on the topmost channel
     */
    chan = Tcl_GetTopChannel(chan);
#endif
    if (Tcl_GetChannelType(chan) != Tls_ChannelType()) {
        Tcl_AppendResult(interp, "bad channel \"", Tcl_GetChannelName(chan),
                "\": not a TLS channel", NULL);
        return TCL_ERROR;
    }
    statePtr = (State *)Tcl_GetChannelInstanceData( chan);
    statePtr = (State *)Tcl_GetChannelInstanceData(chan);

    if (!SSL_is_init_finished(statePtr->ssl)) {
	int err;
	ret = Tls_WaitForConnect(statePtr, &err);
	if (ret < 0) {
	    char *errStr = statePtr->err;
	    Tcl_ResetResult(interp);
	    Tcl_SetErrno(err);

	    if (!errStr || *errStr == 0)
	    if (!errStr || *errStr == 0) {
	        errStr = Tcl_PosixError(interp);

	    Tcl_AppendResult(interp, "handshake failed: ", errStr, (char*)NULL);
	    }

	    Tcl_AppendResult(interp, "handshake failed: ", errStr,
		    (char *) NULL);
	    return TCL_ERROR;
	}
    }

    Tcl_SetObjResult(interp, Tcl_NewIntObj(ret));
    return TCL_OK;
}

/*
 *-------------------------------------------------------------------
 *

ImportObjCmd(clientData, interp, objc, objv)
    ClientData clientData;	/* Not used. */
    Tcl_Interp *interp;
    int objc;
    Tcl_Obj *CONST objv[];
{
    Tcl_Channel chan;		/* The channel to set a mode on. */
    BIO *bio;
    State *statePtr;		/* client state for ssl socket */
    SSL_CTX *ctx = NULL;
    Tcl_Obj *script = NULL;
    SSL_CTX *ctx	= NULL;
    Tcl_Obj *script	= NULL;
    int idx;
    int flags = TLS_TCL_INIT;
    int server = 0;		/* is connection incoming or outgoing? */
    char *key = NULL;
    char *cert = NULL;
    char *ciphers = NULL;
    char *CAfile = NULL;
    char *CAdir = NULL;
    char *model = NULL;
    int flags		= TLS_TCL_INIT;
    int server		= 0;	/* is connection incoming or outgoing? */
    char *key		= NULL;
    char *cert		= NULL;
    char *ciphers	= NULL;
    char *CAfile	= NULL;
    char *CAdir		= NULL;
    char *model		= NULL;
#if defined(NO_SSL2)
    int ssl2 = 0;
#else
    int ssl2 = 1;
#endif
#if defined(NO_SSL3)
    int ssl3 = 0;

        return TCL_ERROR;
    }

    chan = Tcl_GetChannel(interp, Tcl_GetStringFromObj(objv[1], NULL), NULL);
    if (chan == (Tcl_Channel) NULL) {
        return TCL_ERROR;
    }
#ifdef TCL_CHANNEL_VERSION_2
    /*
     * Make sure to operate on the topmost channel
     */
    chan = Tcl_GetTopChannel(chan);
#endif

    for (idx = 2; idx < objc; idx++) {
	char *opt = Tcl_GetStringFromObj(objv[idx], NULL);

	if (opt[0] != '-')
	    break;

	OPTBOOL( "-ssl3", ssl3);
	OPTBOOL( "-tls1", tls1);

	OPTBAD( "option", "-cafile, -cadir, -certfile, -cipher, -command, -keyfile, -model, -require, -request, -ssl2, -ssl3, -server, or -tls1");

	return TCL_ERROR;
    }
    if (request) verify |= SSL_VERIFY_CLIENT_ONCE | SSL_VERIFY_PEER;
    if (request)            verify |= SSL_VERIFY_CLIENT_ONCE | SSL_VERIFY_PEER;
    if (request && require) verify |= SSL_VERIFY_FAIL_IF_NO_PEER_CERT;
    if (verify == 0) verify = SSL_VERIFY_NONE;
    if (verify == 0)        verify = SSL_VERIFY_NONE;

    proto |= (ssl2 ? TLS_PROTO_SSL2 : 0);
    proto |= (ssl3 ? TLS_PROTO_SSL3 : 0);
    proto |= (tls1 ? TLS_PROTO_TLS1 : 0);

    /* reset to NULL if blank string provided */
    if (cert && !*cert) cert = NULL;
    if (key && !*key) key = NULL;
    if (ciphers && !*ciphers) ciphers = NULL;
    if (CAfile && !*CAfile) CAfile = NULL;
    if (CAdir && !*CAdir) CAdir = NULL;
    if (cert && !*cert)		cert	= NULL;
    if (key && !*key)		key	= NULL;
    if (ciphers && !*ciphers)	ciphers	= NULL;
    if (CAfile && !*CAfile)	CAfile	= NULL;
    if (CAdir && !*CAdir)	CAdir	= NULL;

    if (model != NULL) {
	int mode;
	/* Get the "model" context */
	chan = Tcl_GetChannel( interp, model, &mode);
	if (chan == (Tcl_Channel)0) {
	chan = Tcl_GetChannel(interp, model, &mode);
	if (chan == (Tcl_Channel) NULL) {
	    return TCL_ERROR;
	}
#ifdef TCL_CHANNEL_VERSION_2
	/*
	 * Make sure to operate on the topmost channel
	 */
	chan = Tcl_GetTopChannel(chan);
#endif
	if (Tcl_GetChannelType(chan) != Tls_ChannelType()) {
	    Tcl_AppendResult(interp, "bad channel \"", Tcl_GetChannelName(chan),
		    "\": not a TLS channel", NULL);
	    Tcl_AppendResult(interp, "bad channel \"",
		    Tcl_GetChannelName(chan), "\": not a TLS channel", NULL);
	    return TCL_ERROR;
	}
	statePtr = (State *)Tcl_GetChannelInstanceData( chan);
	statePtr = (State *) Tcl_GetChannelInstanceData(chan);
	ctx = statePtr->ctx;
    } else {
	if ((ctx = CTX_Init( interp, proto, key, cert, CAdir, CAfile, ciphers))
	if ((ctx = CTX_Init(interp, proto, key, cert, CAdir, CAfile, ciphers))
	    == (SSL_CTX*)0) {
	    return TCL_ERROR;
	}
    }

    /* new SSL state */
    statePtr = (State *) Tcl_Alloc((unsigned) sizeof(State));
    statePtr->self = (Tcl_Channel)NULL;
    statePtr->timer = (Tcl_TimerToken)NULL;
    statePtr		= (State *) Tcl_Alloc((unsigned) sizeof(State));
    statePtr->self	= (Tcl_Channel)NULL;
    statePtr->timer	= (Tcl_TimerToken)NULL;

    statePtr->flags = flags;
    statePtr->watchMask = 0;
    statePtr->mode = 0;
    statePtr->flags	= flags;
    statePtr->watchMask	= 0;
    statePtr->mode	= 0;

    statePtr->interp = interp;
    statePtr->callback = (Tcl_Obj *)0;
    statePtr->interp	= interp;
    statePtr->callback	= (Tcl_Obj *)0;

    statePtr->vflags = verify;
    statePtr->ssl = (SSL*)0;
    statePtr->ctx = ctx;
    statePtr->bio = (BIO*)0;
    statePtr->p_bio = (BIO*)0;
    statePtr->vflags	= verify;
    statePtr->ssl	= (SSL*)0;
    statePtr->ctx	= ctx;
    statePtr->bio	= (BIO*)0;
    statePtr->p_bio	= (BIO*)0;

    statePtr->err = "";
    statePtr->err	= "";

    /*
     * We need to make sure that the channel works in binary (for the
     * encryption not to get goofed up).
     * We only want to adjust the buffering in pre-v2 channels, where
     * each channel in the stack maintained its own buffers.
     */
    Tcl_SetChannelOption(interp, chan, "-translation", "binary");
#ifndef TCL_CHANNEL_VERSION_2
    Tcl_SetChannelOption(interp, chan, "-buffering", "none");
#endif

#if TCL_MAJOR_VERSION == 8 && TCL_MINOR_VERSION < 2
    statePtr->parent = chan;
    statePtr->self = Tcl_ReplaceChannel( interp,
				Tls_ChannelType(), (ClientData) statePtr,
			       (TCL_READABLE | TCL_WRITABLE), statePtr->parent);
    statePtr->self = Tcl_ReplaceChannel(interp,
	    Tls_ChannelType(), (ClientData) statePtr,
	    (TCL_READABLE | TCL_WRITABLE), statePtr->parent);
#else
#ifdef TCL_CHANNEL_VERSION_2
    statePtr->self = Tcl_StackChannel(interp, Tls_ChannelType(),
	    (ClientData) statePtr, (TCL_READABLE | TCL_WRITABLE), chan);
#else
    statePtr->self = chan;
    Tcl_StackChannel( interp, Tls_ChannelType(), (ClientData) statePtr,
			       (TCL_READABLE | TCL_WRITABLE), chan);
	    (TCL_READABLE | TCL_WRITABLE), chan);
#endif
#endif
    if (statePtr->self == (Tcl_Channel) NULL) {
	/*
	 * No use of Tcl_EventuallyFree because no possible Tcl_Preserve.
	 */
	Tls_Free((char *) statePtr);
        return TCL_ERROR;
    }

    /* allocate script */
    if (script) {
	char * tmp = Tcl_GetStringFromObj(script, NULL);
	char *tmp = Tcl_GetStringFromObj(script, NULL);
	if (tmp && *tmp) {
	    statePtr->callback = Tcl_DuplicateObj(script);
	    Tcl_IncrRefCount( statePtr->callback);
	    Tcl_IncrRefCount(statePtr->callback);
	}
    }
    /* This is only needed because of a bug in OpenSSL, where the
     * ssl->verify_callback is not referenced!!! (Must be done
     * *before* SSL_new() is called!
     */
    SSL_CTX_set_verify(statePtr->ctx, verify, VerifyCallback);

    /*
     * SSL Initialization
     */

    statePtr->ssl = SSL_new(statePtr->ctx);
    if (!statePtr->ssl) {
        /* SSL library error */
        Tcl_AppendResult(interp,
                         "couldn't construct ssl session: ", REASON(),
                         (char *) NULL);
        Tcl_AppendResult(interp, "couldn't construct ssl session: ", REASON(),
		(char *) NULL);
	Tls_Free((char *) statePtr);
        return TCL_ERROR;
    }

    /*
     * SSL Callbacks
     */

    SSL_set_app_data(statePtr->ssl, (VOID *)statePtr);	/* point back to us */

    /*
     * The following is broken - we need is to set the
     * verify_mode, but the library ignores the verify_callback!!!
     */
    /*SSL_set_verify(statePtr->ssl, verify, VerifyCallback);*/

    SSL_CTX_set_info_callback( statePtr->ctx, InfoCallback);
    SSL_CTX_set_info_callback(statePtr->ctx, InfoCallback);

    /* Create Tcl_Channel BIO Handler */
    statePtr->p_bio = bio = BIO_new_tcl( statePtr, BIO_CLOSE);
    statePtr->bio = BIO_new(BIO_f_ssl());
    statePtr->p_bio	= BIO_new_tcl(statePtr, BIO_CLOSE);
    statePtr->bio	= BIO_new(BIO_f_ssl());

    if (server) {
	statePtr->flags |= TLS_TCL_SERVER;
	SSL_set_accept_state(statePtr->ssl);
    } else {
	SSL_set_connect_state(statePtr->ssl);
    }
    SSL_set_bio(statePtr->ssl, bio, bio);
    SSL_set_bio(statePtr->ssl, statePtr->p_bio, statePtr->p_bio);
    BIO_set_ssl(statePtr->bio, statePtr->ssl, BIO_CLOSE);

    /*
     * End of SSL Init
     */
    Tcl_SetResult(interp, Tcl_GetChannelName(statePtr->self), TCL_VOLATILE);
    return TCL_OK;

    if (!SSL_CTX_load_verify_locations(ctx, F2N(CAfile, &ds), F2N(CAdir, &ds1)) ||
        !SSL_CTX_set_default_verify_paths(ctx)) {
#if 0
	Tcl_DStringFree(&ds);
	Tcl_DStringFree(&ds1);
	/* Don't currently care if this fails */
	Tcl_AppendResult(interp, "SSL default verify paths: ",
                             REASON(), (char *) NULL);
		REASON(), (char *) NULL);
	SSL_CTX_free(ctx);
	return (SSL_CTX *)0;
#endif
    }
    SSL_CTX_set_client_CA_list(ctx, SSL_load_client_CA_file( F2N(CAfile, &ds) ));

    Tcl_DStringFree(&ds);

    if (objc != 2) {
        Tcl_WrongNumArgs(interp, 1, objv, "channel");
        return TCL_ERROR;
    }
    channelName = Tcl_GetStringFromObj(objv[1], NULL);

    chan = Tcl_GetChannel( interp, channelName, &mode);
    if (chan == (Tcl_Channel)0) {
    chan = Tcl_GetChannel(interp, channelName, &mode);
    if (chan == (Tcl_Channel) NULL) {
	return TCL_ERROR;
    }
#ifdef TCL_CHANNEL_VERSION_2
    /*
     * Make sure to operate on the topmost channel
     */
    chan = Tcl_GetTopChannel(chan);
#endif
    if (Tcl_GetChannelType(chan) != Tls_ChannelType()) {
        Tcl_AppendResult(interp, "bad channel \"", Tcl_GetChannelName(chan),
                "\": not a TLS channel", NULL);
        return TCL_ERROR;
    }
    statePtr = (State *)Tcl_GetChannelInstanceData( chan);
    peer = SSL_get_peer_certificate(statePtr->ssl);
    if (peer)
	objPtr = Tls_NewX509Obj( interp, peer);
    else
	objPtr = Tcl_NewListObj( 0, NULL);
    statePtr	= (State *) Tcl_GetChannelInstanceData(chan);
    peer	= SSL_get_peer_certificate(statePtr->ssl);
    if (peer) {
	objPtr = Tls_NewX509Obj(interp, peer);
    } else {
	objPtr = Tcl_NewListObj(0, NULL);
    }

    ciphers = (char*)SSL_get_cipher(statePtr->ssl);
    if (ciphers != NULL && strcmp(ciphers, "(NONE)")!=0) {
	Tcl_ListObjAppendElement( interp, objPtr,
		Tcl_NewStringObj( "cipher", -1) );
	Tcl_ListObjAppendElement( interp, objPtr,
		Tcl_NewStringObj( SSL_get_cipher(statePtr->ssl), -1) );
	Tcl_ListObjAppendElement(interp, objPtr,
		Tcl_NewStringObj("cipher", -1));
	Tcl_ListObjAppendElement(interp, objPtr,
		Tcl_NewStringObj(SSL_get_cipher(statePtr->ssl), -1));
    }
    Tcl_SetObjResult( interp, objPtr);
    return TCL_OK;
}

/*
 *-------------------------------------------------------------------

 *	Frees all the state
 *
 *-------------------------------------------------------------------
 */
void
Tls_Clean(State *statePtr)
{
    /*
    /* we're assuming here that we're single-threaded */
     * we're assuming here that we're single-threaded
     */

    if (statePtr->timer != (Tcl_TimerToken) NULL) {
	Tcl_DeleteTimerHandler(statePtr->timer);
	statePtr->timer = NULL;
    }

    if (statePtr->ssl) {
	SSL_shutdown(statePtr->ssl);
	SSL_free(statePtr->ssl);
	statePtr->ssl = NULL;
    }
    if (statePtr->callback) {
	Tcl_DecrRefCount(statePtr->callback);
	statePtr->callback = NULL;
    }

    if (statePtr->timer != (Tcl_TimerToken)NULL) {
	Tcl_DeleteTimerHandler (statePtr->timer);
	statePtr->timer = NULL;
    }
}

/*
 *-------------------------------------------------------------------
 *
 * Tls_Init --
 *

                                         * to be made available. */
{
#if TCL_MAJOR_VERSION >= 8 && TCL_MINOR_VERSION >= 2
    if (!Tcl_InitStubs(interp, TCL_VERSION, 0)) {
        return TCL_ERROR;
    }
#endif
    if (SSL_library_init() != 1) {
        Tcl_AppendResult(interp, "could not initialize SSL library", NULL);
	return TCL_ERROR;
    }
    SSL_load_error_strings();
    ERR_load_crypto_strings();
    SSL_library_init();

    Tcl_CreateObjCommand(interp, "tls::ciphers", CiphersObjCmd , (ClientData) 0,
                      (Tcl_CmdDeleteProc *) NULL);
    Tcl_CreateObjCommand(interp, "tls::ciphers", CiphersObjCmd,
	    (ClientData) 0, (Tcl_CmdDeleteProc *) NULL);

    Tcl_CreateObjCommand(interp, "tls::handshake", HandshakeObjCmd , (ClientData) 0,
                      (Tcl_CmdDeleteProc *) NULL);
    Tcl_CreateObjCommand(interp, "tls::handshake", HandshakeObjCmd,
	    (ClientData) 0, (Tcl_CmdDeleteProc *) NULL);

    Tcl_CreateObjCommand(interp, "tls::import", ImportObjCmd , (ClientData) 0,
                      (Tcl_CmdDeleteProc *) NULL);
    Tcl_CreateObjCommand(interp, "tls::import", ImportObjCmd,
	    (ClientData) 0, (Tcl_CmdDeleteProc *) NULL);

    Tcl_CreateObjCommand(interp, "tls::status", StatusObjCmd , (ClientData) 0,
                      (Tcl_CmdDeleteProc *) NULL);
    Tcl_CreateObjCommand(interp, "tls::status", StatusObjCmd,
	    (ClientData) 0, (Tcl_CmdDeleteProc *) NULL);

    return Tcl_PkgProvide(interp, PACKAGE, VERSION);
}


/*
 *------------------------------------------------------*
 *
 *	Tls_SafeInit --
 *
 *	------------------------------------------------*

#
# Copyright (C) 1997-2000 Matt Newman <matt@novadigm.com>
#
# $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tls.tcl,v 1.2 2000/01/20 01:51:05 aborr Exp $
# $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tls.tcl,v 1.3 2000/07/27 01:58:18 hobbs Exp $
#
namespace eval tls {
    variable logcmd tclLog
    variable debug 0
 
    # Default flags passed to tls::import
    variable defaults {}

    set argc [llength $args]
    set sopts {}
    set iopts [concat [list -server $server] ${tls::defaults}]	;# Import options

    for {set idx 0} {$idx < $argc} {incr idx} {
	set arg [lindex $args $idx]
	switch -glob -- $server,$arg {
	0,-myport	-
	*,-myaddr	{lappend sopts $arg [lindex $args [incr idx]]}
	0,-async	{lappend sopts $arg}
	*,-cipher	-
	*,-cadir	-
	*,-cafile	-
	*,-certfile	-
	*,-keyfile	-
	*,-command	-
	*,-request	-
	*,-require	-
	*,-ssl2		-
	*,-ssl3		-
	*,-tls1		{lappend iopts $arg [lindex $args [incr idx]]}
	-*		{return -code error "bad option \"$arg\": must be one of $options"}
	default	{break}
	    0,-myport	-
	    *,-myaddr	{lappend sopts $arg [lindex $args [incr idx]]}
	    0,-async	{lappend sopts $arg}
	    *,-cipher	-
	    *,-cadir	-
	    *,-cafile	-
	    *,-certfile	-
	    *,-keyfile	-
	    *,-command	-
	    *,-request	-
	    *,-require	-
	    *,-ssl2	-
	    *,-ssl3	-
	    *,-tls1	{lappend iopts $arg [lindex $args [incr idx]]}
	    -*		{return -code error "bad option \"$arg\": must be one of $options"}
	    default	{break}
	}
    }
    if {$server} {
	if {($idx + 1) != $argc} {
	    return -code error $usage
	}
	set uid [incr ::tls::srvuid]

	set port [lindex $args [expr {$argc-1}]]
	lappend sopts $port
	#set sopts [linsert $sopts 0 -server $callback]
	set sopts [linsert $sopts 0 -server [list tls::_accept $iopts $callback]]
	#set sopts [linsert $sopts 0 -server [list tls::_accept $uid $callback]]
    } else {
	if {($idx + 2) != $argc} {
	    return -code error $usage
	}
	set host [lindex $args [expr {$argc-2}]]

    } err]} {
	set info ${::errorInfo}
	catch {close $chan}
	return -code error -errorinfo $info $err
    }
    return $chan
}

# tls::_accept --
#
#   This is the actual accept that TLS sockets use, which then calls
#   the callback registered by tls::socket.
#
# Arguments:
#   iopts	tls::import opts
#   callback	server callback to invoke
#   chan	socket channel to accept/deny
#   ipaddr	calling IP address
#   port	calling port
#
# Results:
#   Returns an error if the callback throws one.
#
proc tls::_accept { iopts callback chan ipaddr port } {
    log 2 [list tls::_accept $iopts $callback $chan $ipaddr $port]

    set chan [eval [list tls::import $chan] $iopts]

    lappend callback $chan $ipaddr $port
    if {[catch {
	uplevel #0 $callback
    } err]} {
	log 1 "tls::_accept error: ${::errorInfo}"
	close $chan
	error $err $::errorInfo $::errorCode
    } else {
	log 2 "tls::_accept - called \"$callback\" succeeded"
    }
}
#
# Sample callback for hooking: -
#
# error
# info
# password
# verify
#
proc tls::callback {option args} {
    variable debug

    #log 2 [concat $option $args]

    switch -- $option {
    "error"	{
	foreach {chan msg} $args break
	"error"	{
	    foreach {chan msg} $args break

	log 0 "TLS/$chan: error: $msg"
    }
    "verify"	{
	# poor man's lassign
	foreach {chan depth cert rc err} $args break
	    log 0 "TLS/$chan: error: $msg"
	}
	"verify"	{
	    # poor man's lassign
	    foreach {chan depth cert rc err} $args break

	array set c $cert
	    array set c $cert

	if {$rc != "1"} {
	    log 1 "TLS/$chan: verify/$depth: Bad Cert: $err (rc = $rc)"
	} else {
	    log 2 "TLS/$chan: verify/$depth: $c(subject)"
	}
	if {$debug > 0} {
	    return 1;	# FORCE OK
	} else {
	    return $rc
	}
    }
    "info"	{
	# poor man's lassign
	foreach {chan major minor state msg} $args break
	    if {$rc != "1"} {
		log 1 "TLS/$chan: verify/$depth: Bad Cert: $err (rc = $rc)"
	    } else {
		log 2 "TLS/$chan: verify/$depth: $c(subject)"
	    }
	    if {$debug > 0} {
		return 1;	# FORCE OK
	    } else {
		return $rc
	    }
	}
	"info"	{
	    # poor man's lassign
	    foreach {chan major minor state msg} $args break

	if {$msg != ""} {
	    append state ": $msg"
	}
	# For tracing
	upvar #0 tls::$chan cb
	set cb($major) $minor
	    if {$msg != ""} {
		append state ": $msg"
	    }
	    # For tracing
	    upvar #0 tls::$chan cb
	    set cb($major) $minor

	log 2 "TLS/$chan: $major/$minor: $state"
    }
    default	{
	return -code error "bad option \"$option\": must be one of error, info, or verify"
    }
	    log 2 "TLS/$chan: $major/$minor: $state"
	}
	default	{
	    return -code error "bad option \"$option\":\
		    must be one of error, info, or verify"
	}
    };#sw
    }
}

proc tls::xhandshake {chan} {
    upvar #0 tls::$chan cb

    if {[info exists cb(handshake)] && \
	$cb(handshake) == "done"} {

/*
 * Copyright (C) 1997-2000 Matt Newman <matt@novadigm.com>
 *
 * $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tlsBIO.c,v 1.2 2000/01/20 01:51:39 aborr Exp $
 * $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tlsBIO.c,v 1.3 2000/07/27 01:58:18 hobbs Exp $
 *
 * Provides BIO layer to interface openssl to Tcl.
 */

#include "tlsInt.h"

/*

BIO *
BIO_new_tcl(statePtr, flags)
    State *statePtr;
    int flags;
{
    BIO *bio;

    bio = BIO_new(&BioMethods);
    bio->ptr = (char*)statePtr;
    bio->init = 1;
    bio->shutdown = flags;
    bio			= BIO_new(&BioMethods);
    bio->ptr		= (char*)statePtr;
    bio->init		= 1;
    bio->shutdown	= flags;

    return bio;
}

BIO_METHOD *
BIO_s_tcl()
{
    return &BioMethods;
}

static int
BioWrite (bio, buf, bufLen)
    BIO *bio;
    char *buf;
    int bufLen;
{
    Tcl_Channel chan = Tls_GetParent((State*)bio->ptr);
    Tcl_Channel chan = Tls_GetParent((State*)(bio->ptr));
    int ret;

    dprintf(stderr,"\nBioWrite(0x%x, <buf>, %d) [0x%x]", bio, bufLen, chan);

#ifdef TCL_CHANNEL_VERSION_2
    ret = Tcl_WriteRaw(chan, buf, bufLen);
#else
    ret = Tcl_Write( chan, buf, bufLen);
    ret = Tcl_Write(chan, buf, bufLen);
#endif

    dprintf(stderr,"\n[0x%x] BioWrite(%d) -> %d [%d.%d]", chan, bufLen, ret,
		Tcl_Eof( chan), Tcl_GetErrno());
	    Tcl_Eof(chan), Tcl_GetErrno());

    BIO_clear_flags(bio, BIO_FLAGS_WRITE|BIO_FLAGS_SHOULD_RETRY);

    if (ret == 0) {
	if (!Tcl_Eof( chan)) {
	if (!Tcl_Eof(chan)) {
	    BIO_set_retry_write(bio);
	    ret = -1;
	}
    }
    if (BIO_should_read(bio))
    if (BIO_should_read(bio)) {
	BIO_set_retry_read(bio);
    }
    return ret;
}

static int
BioRead (bio, buf, bufLen)
    BIO *bio;
    char *buf;
    int bufLen;
{
    Tcl_Channel chan = Tls_GetParent((State*)bio->ptr);
    int ret = 0;

    dprintf(stderr,"\nBioRead(0x%x, <buf>, %d) [0x%x]", bio, bufLen, chan);

    if (buf == NULL) return 0;

#ifdef TCL_CHANNEL_VERSION_2
    ret = Tcl_ReadRaw(chan, buf, bufLen);
#else
    ret = Tcl_Read( chan, buf, bufLen);
    ret = Tcl_Read(chan, buf, bufLen);
#endif

    dprintf(stderr,"\n[0x%x] BioRead(%d) -> %d [%d.%d]", chan, bufLen, ret,
	Tcl_Eof(chan), Tcl_GetErrno());
	    Tcl_Eof(chan), Tcl_GetErrno());

    BIO_clear_flags(bio, BIO_FLAGS_READ|BIO_FLAGS_SHOULD_RETRY);

    if (ret == 0) {
	if (!Tcl_Eof( chan)) {
	if (!Tcl_Eof(chan)) {
	    BIO_set_retry_read(bio);
	    ret = -1;
	}
    }
    if (BIO_should_write(bio))
    if (BIO_should_write(bio)) {
	BIO_set_retry_write(bio);
    }
    return ret;
}

static int
BioPuts	(bio, str)
    BIO *bio;
    char *str;
{
    return BioWrite( bio, str, strlen(str));
    return BioWrite(bio, str, strlen(str));
}

static long
BioCtrl	(bio, cmd, num, ptr)
    BIO *bio;
    int cmd;
    long num;

	break;
    case BIO_CTRL_INFO:
	ret = 1;
	break;
    case BIO_C_SET_FD:
	BioFree(bio);
	/* Sets State* */
	bio->ptr = *((char **)ptr);
	bio->shutdown = (int)num;
	bio->init = 1;
	bio->ptr	= *((char **)ptr);
	bio->shutdown	= (int)num;
	bio->init	= 1;
	break;
    case BIO_C_GET_FD:
	if (bio->init) {
	    ip=(int *)ptr;
	    if (ip != NULL) *ip=bio->num;
		ret=bio->num;
	    ip = (int *)ptr;
	    if (ip != NULL) {
		*ip = bio->num;
	    }
	    ret = bio->num;
	} else {
	    ret= -1;
	    ret = -1;
	}
	break;
    case BIO_CTRL_GET_CLOSE:
	ret=bio->shutdown;
	ret = bio->shutdown;
	break;
    case BIO_CTRL_SET_CLOSE:
	bio->shutdown=(int)num;
	bio->shutdown = (int)num;
	break;
    case BIO_CTRL_EOF:
	dprintf(stderr, "BIO_CTRL_EOF\n");
	ret = Tcl_Eof( chan);
	ret = Tcl_Eof(chan);
	break;
    case BIO_CTRL_PENDING:
	if (Tcl_InputBuffered(chan))
	ret = (Tcl_InputBuffered(chan) ? 1 : 0);
	    ret = 1;
	else
	    ret = 0;
	dprintf(stderr, "BIO_CTRL_PENDING(%d)\n", ret);
	break;
    case BIO_CTRL_WPENDING:
	ret=0;
	ret = 0;
	break;
    case BIO_CTRL_DUP:
	break;
    case BIO_CTRL_FLUSH:
	dprintf(stderr, "BIO_CTRL_FLUSH\n");
	if (
#ifdef TCL_CHANNEL_VERSION_2
	    Tcl_WriteRaw(chan, "", 0) >= 0
#else
	if (Tcl_Flush( chan) == TCL_OK)
	    ret=1;
	else
	    ret=-1;
	    Tcl_Flush(chan) == TCL_OK
#endif
	    ) {
	    ret = 1;
	} else {
	    ret = -1;
	}
	break;
    default:
	ret=0;
	ret = 0;
	break;
    }
    return(ret);
}

static int
BioNew	(bio)
    BIO *bio;
{
    bio->init = 0;
    bio->num = 0;
    bio->ptr = NULL;
    bio->flags = 0;
    bio->init	= 0;
    bio->num	= 0;
    bio->ptr	= NULL;
    bio->flags	= 0;

    return 1;
}

static int
BioFree	(bio)
    BIO *bio;
{
    if (bio == NULL)
    if (bio == NULL) {
	return 0;
    }

    if (bio->shutdown) {
	if (bio->init) {
	    /*shutdown(bio->num, 2) */
	    /*closesocket(bio->num) */
	}
	bio->init = 0;
	bio->flags = 0;
	bio->num = 0;
	bio->init	= 0;
	bio->flags	= 0;
	bio->num	= 0;
    }
    return 1;
}

/*
 * Copyright (C) 1997-2000 Matt Newman <matt@novadigm.com>
 *
 * $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tlsIO.c,v 1.7 2000/06/05 18:09:54 welch Exp $
 * $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tlsIO.c,v 1.8 2000/07/27 01:58:18 hobbs Exp $
 *
 * TLS (aka SSL) Channel - can be layered on any bi-directional
 * Tcl_Channel (Note: Requires Trf Core Patch)
 *
 * This was built from scratch based upon observation of OpenSSL 0.9.2B
 *
 * Addition credit is due for Andreas Kupries (a.kupries@westend.com), for

 * Local Defines
 */

/*
 * Forward declarations
 */

static int	BlockModeProc _ANSI_ARGS_((ClientData instanceData, int mode));
static int	CloseProc _ANSI_ARGS_ ((ClientData instanceData, Tcl_Interp *interp));
static int	InputProc _ANSI_ARGS_((ClientData instanceData,
			    char *buf, int bufSize, int *errorCodePtr));
static int	OutputProc _ANSI_ARGS_((ClientData instanceData,
			    char *buf, int toWrite, int *errorCodePtr));
static int	GetOptionProc _ANSI_ARGS_ ((ClientData instanceData,
			    Tcl_Interp *interp, char *optionName, Tcl_DString *dsPtr));
static void	WatchProc _ANSI_ARGS_((ClientData instanceData, int mask));
static int	GetHandleProc _ANSI_ARGS_ ((ClientData instanceData,
			    int direction, ClientData *handlePtr));
static void	ChannelHandler _ANSI_ARGS_ ((ClientData clientData, int mask));
static void	ChannelHandlerTimer _ANSI_ARGS_ ((ClientData clientData));
static int	TlsBlockModeProc _ANSI_ARGS_((ClientData instanceData,
			int mode));
static int	TlsCloseProc _ANSI_ARGS_ ((ClientData instanceData,
			Tcl_Interp *interp));
static int	TlsInputProc _ANSI_ARGS_((ClientData instanceData,
			char *buf, int bufSize, int *errorCodePtr));
static int	TlsOutputProc _ANSI_ARGS_((ClientData instanceData,
			char *buf, int toWrite, int *errorCodePtr));
static int	TlsGetOptionProc _ANSI_ARGS_ ((ClientData instanceData,
			Tcl_Interp *interp, char *optionName,
			Tcl_DString *dsPtr));
static void	TlsWatchProc _ANSI_ARGS_((ClientData instanceData, int mask));
static int	TlsGetHandleProc _ANSI_ARGS_ ((ClientData instanceData,
			int direction, ClientData *handlePtr));
static int	TlsNotifyProc _ANSI_ARGS_ ((ClientData instanceData,
			int mask));
static void	TlsChannelHandler _ANSI_ARGS_ ((ClientData clientData,
			int mask));
static void	TlsChannelHandlerTimer _ANSI_ARGS_ ((ClientData clientData));

/*
 * This structure describes the channel type structure for TCP socket
 * based IO:
 */

#ifdef TCL_CHANNEL_VERSION_2
static Tcl_ChannelType tlsChannelType = {
    "tls",		/* Type name. */
    TCL_CHANNEL_VERSION_2,	/* A v2 channel (8.3.2/8.4a2+) */
    TlsCloseProc,	/* Close proc. */
    TlsInputProc,	/* Input proc. */
    TlsOutputProc,	/* Output proc. */
    NULL,		/* Seek proc. */
    NULL,		/* Set option proc. */
    TlsGetOptionProc,	/* Get option proc. */
    TlsWatchProc,	/* Initialize notifier. */
    TlsGetHandleProc,	/* Get file handle out of channel. */
    NULL,		/* Close2Proc. */
    BlockModeProc,	/* Set blocking/nonblocking mode.*/
    CloseProc,		/* Close proc. */
    InputProc,		/* Input proc. */
    OutputProc,		/* Output proc. */
    TlsBlockModeProc,	/* Set blocking/nonblocking mode.*/
    NULL,		/* FlushProc. */
    TlsNotifyProc,	/* handlerProc. */
};
#else
static Tcl_ChannelType tlsChannelType = {
    "tls",		/* Type name. */
    TlsBlockModeProc,	/* Set blocking/nonblocking mode.*/
    TlsCloseProc,	/* Close proc. */
    TlsInputProc,	/* Input proc. */
    TlsOutputProc,	/* Output proc. */
    NULL,		/* Seek proc. */
    NULL,		/* Set option proc. */
    GetOptionProc,	/* Get option proc. */
    WatchProc,		/* Initialize notifier. */
    GetHandleProc,	/* Get file handle out of channel. */
    TlsGetOptionProc,	/* Get option proc. */
    TlsWatchProc,	/* Initialize notifier. */
    TlsGetHandleProc,	/* Get file handle out of channel. */
};
#endif

Tcl_ChannelType *Tls_ChannelType()
{
    return &tlsChannelType;
}

/*
 *-------------------------------------------------------------------
 *
 * BlockModeProc --
 * TlsBlockModeProc --
 *
 *	This procedure is invoked by the generic IO level
 *       to set blocking and nonblocking modes
 * Results:
 *	0 if successful, errno when failed.
 *
 * Side effects:
 *	Sets the device into blocking or nonblocking mode.
 *
 *-------------------------------------------------------------------
 */

static int
BlockModeProc(ClientData instanceData,	/* Socket state. */
TlsBlockModeProc(ClientData instanceData,	/* Socket state. */
                 int mode)			/* The mode to set. Can be one of
						* TCL_MODE_BLOCKING or
						* TCL_MODE_NONBLOCKING. */
{
    State *statePtr = (State *) instanceData;

    if (mode == TCL_MODE_NONBLOCKING) {
	statePtr->flags |= TLS_TCL_ASYNC;
    } else {
	statePtr->flags &= ~(TLS_TCL_ASYNC);
    }
#ifdef TCL_CHANNEL_VERSION_2
    return 0;
#else
    return Tcl_SetChannelOption(statePtr->interp, Tls_GetParent(statePtr),
		"-blocking", (mode == TCL_MODE_NONBLOCKING) ? "0" : "1");
#endif
}

/*
 *-------------------------------------------------------------------
 *
 * CloseProc --
 * TlsCloseProc --
 *
 *	This procedure is invoked by the generic IO level to perform
 *	channel-type-specific cleanup when a SSL socket based channel
 *	is closed.
 *
 *	Note: we leave the underlying socket alone, is this right?
 *
 * Results:
 *	0 if successful, the value of Tcl_GetErrno() if failed.
 *
 * Side effects:
 *	Closes the socket of the channel.
 *
 *-------------------------------------------------------------------
 */
static int
CloseProc(ClientData instanceData,	/* The socket to close. */
TlsCloseProc(ClientData instanceData,	/* The socket to close. */
             Tcl_Interp *interp)	/* For error reporting - unused. */
{
    State *statePtr = (State *) instanceData;

    dprintf(stderr,"\nCloseProc(0x%x)", statePtr);
    dprintf(stderr,"\nTlsCloseProc(0x%x)", statePtr);

#ifndef TCL_CHANNEL_VERSION_2
    /*
     * Remove event handler to underlying channel, this could
     * be because we are closing for real, or being "unstacked".
     */

    Tcl_DeleteChannelHandler(Tls_GetParent(statePtr),
	ChannelHandler, (ClientData) statePtr);

	TlsChannelHandler, (ClientData) statePtr);
#endif
    if (statePtr->timer != (Tcl_TimerToken)NULL) {
	Tcl_DeleteTimerHandler (statePtr->timer);
	statePtr->timer = (Tcl_TimerToken)NULL;
    }


    Tls_Clean(statePtr);
    Tcl_EventuallyFree( (ClientData)statePtr, Tls_Free);
    Tcl_EventuallyFree((ClientData)statePtr, Tls_Free);
    return TCL_OK;
}

/*
 *-------------------------------------------------------------------
 *
 * InputProc --
 * TlsInputProc --
 *
 *	This procedure is invoked by the generic IO level
 *       to read input from a SSL socket based channel.
 *
 * Results:
 *	The number of bytes read is returned or -1 on error. An output
 *	argument contains the POSIX error code on error, or zero if no
 *	error occurred.
 *
 * Side effects:
 *	Reads input from the input device of the channel.
 *
 *-------------------------------------------------------------------
 */

static int
InputProc(ClientData instanceData,	/* Socket state. */
             char *buf,			/* Where to store data read. */
             int bufSize,		/* How much space is available
                                         * in the buffer? */
             int *errorCodePtr)		/* Where to store error code. */
TlsInputProc(ClientData instanceData,	/* Socket state. */
	char *buf,			/* Where to store data read. */
	int bufSize,			/* How much space is available
					 * in the buffer? */
	int *errorCodePtr)		/* Where to store error code. */
{
    State *statePtr = (State *) instanceData;
    int bytesRead;			/* How many bytes were read? */

    *errorCodePtr = 0;

    dprintf(stderr,"\nBIO_read(%d)", bufSize);

    if (!SSL_is_init_finished(statePtr->ssl)) {
	bytesRead = Tls_WaitForConnect(statePtr, errorCodePtr);
	if (bytesRead <= 0) {
	    goto input;
	}
    }
    if (statePtr->flags & TLS_TCL_INIT) {
	statePtr->flags &= ~(TLS_TCL_INIT);
    }
    /*
     * We need to clear the SSL error stack now because we sometimes reach
     * this function with leftover errors in the stack.  If BIO_read
     * returns -1 and intends EAGAIN, there is a leftover error, it will be
     * misconstrued as an error, not EAGAIN.
     *
     * Alternatively, we may want to handle the <0 return codes from
     * BIO_read specially (as advised in the RSA docs).  TLS's lower level BIO
     * functions play with the retry flags though, and this seems to work
     * correctly.  Similar fix in TlsOutputProc. - hobbs
     */
    ERR_clear_error();
    bytesRead = BIO_read(statePtr->bio, buf, bufSize);
    dprintf(stderr,"\nBIO_read -> %d", bytesRead);

    if (bytesRead < 0) {
	int err = SSL_get_error(statePtr->ssl, bytesRead);

	if (err == SSL_ERROR_SSL) {
	    Tls_Error(statePtr, SSL_ERROR(statePtr->ssl, bytesRead));
	    *errorCodePtr = ECONNABORTED;
	    goto input;
	} else if (BIO_should_retry(statePtr->bio)) {
	    dprintf(stderr,"RE! ");
	    *errorCodePtr = EAGAIN;
	    goto input;
	}
	if (Tcl_GetErrno() == ECONNRESET) {
	    /* Soft EOF */
	    bytesRead = 0;
	} else {
	    *errorCodePtr = Tcl_GetErrno();
	    if (*errorCodePtr == ECONNRESET) {
		/* Soft EOF */
		*errorCodePtr = 0;
		bytesRead = 0;
	    goto input;
	} else {
	    *errorCodePtr = Tcl_GetErrno();
	    goto input;
	}
    }
input:
	    }
	}
    }
    input:
    dprintf(stderr, "\nInput(%d) -> %d [%d]", bufSize, bytesRead, *errorCodePtr);
    return bytesRead;
}

/*
 *-------------------------------------------------------------------
 *
 * OutputProc --
 * TlsOutputProc --
 *
 *	This procedure is invoked by the generic IO level
 *       to write output to a SSL socket based channel.
 *
 * Results:
 *	The number of bytes written is returned. An output argument is
 *	set to a POSIX error code if an error occurred, or zero.
 *
 * Side effects:
 *	Writes output on the output device of the channel.
 *
 *-------------------------------------------------------------------
 */

static int
OutputProc(ClientData instanceData,	/* Socket state. */
              char *buf,			/* The data buffer. */
TlsOutputProc(ClientData instanceData,	/* Socket state. */
              char *buf,		/* The data buffer. */
              int toWrite,		/* How many bytes to write? */
              int *errorCodePtr)	/* Where to store error code. */
{
    State *statePtr = (State *) instanceData;
    int written, err;

    *errorCodePtr = 0;

    dprintf(stderr,"\nBIO_write(%d)", toWrite);
    dprintf(stderr,"\nBIO_write(0x%x, %d)", statePtr, toWrite);

    if (!SSL_is_init_finished(statePtr->ssl)) {
	written = Tls_WaitForConnect(statePtr, errorCodePtr);
	if (written <= 0) {
	    goto output;
	}
    }
    if (statePtr->flags & TLS_TCL_INIT) {
	statePtr->flags &= ~(TLS_TCL_INIT);
    }
    if (toWrite == 0) {
	dprintf(stderr, "zero-write\n");
	BIO_flush(statePtr->bio);
	written = 0;
	goto output;
    } else {
	/*
	 * We need to clear the SSL error stack now because we sometimes reach
	 * this function with leftover errors in the stack.  If BIO_write
	 * returns -1 and intends EAGAIN, there is a leftover error, it will be
	 * misconstrued as an error, not EAGAIN.
	 *
	 * Alternatively, we may want to handle the <0 return codes from
	 * BIO_write specially (as advised in the RSA docs).  TLS's lower level
	 * BIO functions play with the retry flags though, and this seems to
	 * work correctly.  Similar fix in TlsInputProc. - hobbs
	 */
	ERR_clear_error();
	written = BIO_write(statePtr->bio, buf, toWrite);
	dprintf(stderr,"\nBIO_write(%d) -> [%d]", toWrite, written);
	dprintf(stderr,"\nBIO_write(0x%x, %d) -> [%d]",
		statePtr, toWrite, written);
    }
    if (written < 0 || written == 0) {
    if (written <= 0) {
	switch ((err = SSL_get_error(statePtr->ssl, written))) {
	case SSL_ERROR_NONE:
	    if (written <= 0) {
		written = 0;
	    case SSL_ERROR_NONE:
		if (written < 0) {
		    written = 0;
		goto output;
	    }
	    break;
	case SSL_ERROR_WANT_WRITE:
	    dprintf(stderr,"write W BLOCK\n");
	    break;
	case SSL_ERROR_WANT_READ:
	    dprintf(stderr,"write R BLOCK\n");
	    break;
	case SSL_ERROR_WANT_X509_LOOKUP:
	    dprintf(stderr,"write X BLOCK\n");
	    break;
	case SSL_ERROR_ZERO_RETURN:
	    dprintf(stderr,"closed\n");
	    written = 0;
		}
		break;
	    case SSL_ERROR_WANT_WRITE:
		dprintf(stderr," write W BLOCK");
		break;
	    case SSL_ERROR_WANT_READ:
		dprintf(stderr," write R BLOCK");
		break;
	    case SSL_ERROR_WANT_X509_LOOKUP:
		dprintf(stderr," write X BLOCK");
		break;
	    case SSL_ERROR_ZERO_RETURN:
		dprintf(stderr," closed\n");
		written = 0;
	    goto output;
	case SSL_ERROR_SYSCALL:
	    *errorCodePtr = Tcl_GetErrno();
	    dprintf(stderr,"[%d] syscall errr: %d\n", written, Tcl_GetErrno());
	    written = -1;
		break;
	    case SSL_ERROR_SYSCALL:
		*errorCodePtr = Tcl_GetErrno();
		dprintf(stderr," [%d] syscall errr: %d",
			written, *errorCodePtr);
		written = -1;
	    goto output;
	case SSL_ERROR_SSL:
	    Tls_Error(statePtr, SSL_ERROR(statePtr->ssl, written));
	    *errorCodePtr = ECONNABORTED;
	    written = -1;
		break;
	    case SSL_ERROR_SSL:
		Tls_Error(statePtr, SSL_ERROR(statePtr->ssl, written));
		*errorCodePtr = ECONNABORTED;
		written = -1;
	    goto output;
	default:
	    dprintf(stderr,"unknown err: %d\n", err);
		break;
	    default:
		dprintf(stderr," unknown err: %d\n", err);
		break;
	}
    }
output:
    output:
    dprintf(stderr, "\nOutput(%d) -> %d", toWrite, written);
    return written;
}

/*
 *-------------------------------------------------------------------
 *
 * GetOptionProc --
 * TlsGetOptionProc --
 *
 *	Computes an option value for a SSL socket based channel, or a
 *	list of all options and their values.
 *
 *	Note: This code is based on code contributed by John Haxby.
 *
 * Results:
 *	A standard Tcl result. The value of the specified option or a
 *	list of all options and	their values is returned in the
 *	supplied DString.
 *
 * Side effects:
 *	None.
 *
 *-------------------------------------------------------------------
 */
static int
GetOptionProc(ClientData instanceData,	/* Socket state. */
TlsGetOptionProc(ClientData instanceData,	/* Socket state. */
                 Tcl_Interp *interp,		/* For errors - can be NULL. */
                 char *optionName,		/* Name of the option to
                                                 * retrieve the value for, or
                                                 * NULL to get all options and
                                                 * their values. */
                 Tcl_DString *dsPtr)	         /* Where to store the computed value
                                                  * initialized by caller. */
{
#ifdef TCL_CHANNEL_VERSION_2
    State *statePtr = (State *) instanceData;
    Tcl_Channel downChan = Tls_GetParent(statePtr);
    Tcl_DriverGetOptionProc *getOptionProc;

    getOptionProc = Tcl_ChannelGetOptionProc(Tcl_GetChannelType(downChan));
    if (getOptionProc != NULL) {
	return (*getOptionProc)(Tcl_GetChannelInstanceData(downChan),
		interp, optionName, dsPtr);
    } else if (optionName == (char*) NULL) {
	/*
	 * Request is query for all options, this is ok.
	 */
	return TCL_OK;
    }
    /*
     * Request for a specific option has to fail, we don't have any.
     */
    return TCL_ERROR;
#else
    State *statePtr = (State *) instanceData;
    size_t len = 0;

    if (optionName != (char *) NULL) {
        len = strlen(optionName);
    }
#if 0
    if ((len == 0) ||
        ((len > 1) && (optionName[1] == 'c') &&
         (strncmp(optionName, "-cipher", len) == 0))) {
        if (len == 0) {
            Tcl_DStringAppendElement(dsPtr, "-cipher");
        }
        Tcl_DStringAppendElement(dsPtr, SSL_get_cipher(statePtr->ssl));
        if (len) {
            return TCL_OK;
        }
    }
#endif
    return TCL_OK;
#endif
}

/*
 *-------------------------------------------------------------------
 *
 * WatchProc --
 * TlsWatchProc --
 *
 *	Initialize the notifier to watch Tcl_Files from this channel.
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	Sets up the notifier so that a future event on the channel
 *	will be seen by Tcl.
 *
 *-------------------------------------------------------------------
 */

static void
WatchProc(ClientData instanceData,	/* The socket state. */
TlsWatchProc(ClientData instanceData,	/* The socket state. */
             int mask)			/* Events of interest; an OR-ed
                                         * combination of TCL_READABLE,
                                         * TCL_WRITABLE and TCL_EXCEPTION. */
{
    State *statePtr = (State *) instanceData;

#ifdef TCL_CHANNEL_VERSION_2
    Tcl_Channel     downChan;

    statePtr->watchMask = mask;

    /* No channel handlers any more. We will be notified automatically
     * about events on the channel below via a call to our
     * 'TransformNotifyProc'. But we have to pass the interest down now.
     * We are allowed to add additional 'interest' to the mask if we want
     * to. But this transformation has no such interest. It just passes
     * the request down, unchanged.
     */

    downChan = Tls_GetParent(statePtr);

    (Tcl_GetChannelType(downChan))
	->watchProc(Tcl_GetChannelInstanceData(downChan), mask);

    /*
     * Management of the internal timer.
     */

    if (statePtr->timer != (Tcl_TimerToken) NULL) {
        Tcl_DeleteTimerHandler(statePtr->timer);
	statePtr->timer = (Tcl_TimerToken) NULL;
    }
    if ((mask & TCL_READABLE) && Tcl_InputBuffered(statePtr->self) > 0) {
        /*
	 * There is interest in readable events and we actually have
	 * data waiting, so generate a timer to flush that.
	 */
	statePtr->timer = Tcl_CreateTimerHandler(TLS_TCL_DELAY,
		TlsChannelHandlerTimer, (ClientData) statePtr);
    }
#else
    if (mask == statePtr->watchMask)
	return;

    if (statePtr->watchMask) {
	/*
	 * Remove event handler to underlying channel, this could
	 * be because we are closing for real, or being "unstacked".
	 */

	Tcl_DeleteChannelHandler(Tls_GetParent(statePtr),
		ChannelHandler, (ClientData) statePtr);
		TlsChannelHandler, (ClientData) statePtr);
    }
    statePtr->watchMask = mask;
    if (statePtr->watchMask) {
	/*
	 * Setup active monitor for events on underlying Channel.
	 */

	Tcl_CreateChannelHandler(Tls_GetParent(statePtr),
		statePtr->watchMask, ChannelHandler, (ClientData) statePtr);
		statePtr->watchMask, TlsChannelHandler, (ClientData) statePtr);
    }
#endif
}

/*
 *-------------------------------------------------------------------
 *
 * GetHandleProc --
 * TlsGetHandleProc --
 *
 *	Called from Tcl_GetChannelFile to retrieve o/s file handler
 *	from the SSL socket based channel.
 *
 * Results:
 *	The appropriate Tcl_File or NULL if not present. 
 *
 * Side effects:
 *	None.
 *
 *-------------------------------------------------------------------
 */
static int
GetHandleProc(ClientData instanceData,	/* The socket state. */
TlsGetHandleProc(ClientData instanceData,	/* The socket state. */
                 int direction,		/* Which Tcl_File to retrieve? */
                 ClientData *handlePtr)	/* Where to store the handle.  */
{
    State *statePtr = (State *) instanceData;

    return Tcl_GetChannelHandle (Tls_GetParent(statePtr), direction, handlePtr);
    return Tcl_GetChannelHandle(Tls_GetParent(statePtr), direction, handlePtr);
}

/*
 *-------------------------------------------------------------------
 *
 * TlsNotifyProc --
 *
 *	Handler called by Tcl to inform us of activity
 *	on the underlying channel.
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	May process the incoming event by itself.
 *
 *-------------------------------------------------------------------
 */

static int
TlsNotifyProc(instanceData, mask)
    ClientData	   instanceData; /* The state of the notified transformation */
    int		   mask;       /* The mask of occuring events */
{
    State *statePtr = (State *) instanceData;

    /*
     * An event occured in the underlying channel.  This
     * transformation doesn't process such events thus returns the
     * incoming mask unchanged.
     */

    if (statePtr->timer != (Tcl_TimerToken) NULL) {
	/*
	 * Delete an existing timer. It was not fired, yet we are
	 * here, so the channel below generated such an event and we
	 * don't have to. The renewal of the interest after the
	 * execution of channel handlers will eventually cause us to
	 * recreate the timer (in WatchProc).
	 */

	Tcl_DeleteTimerHandler(statePtr->timer);
	statePtr->timer = (Tcl_TimerToken) NULL;
    }

    return mask;
}

#ifndef TCL_CHANNEL_VERSION_2
/*
 *------------------------------------------------------*
 *
 *      ChannelHandler --
 *      TlsChannelHandler --
 *
 *      ------------------------------------------------*
 *      Handler called by Tcl as a result of
 *      Tcl_CreateChannelHandler - to inform us of activity
 *      on the underlying channel.
 *      ------------------------------------------------*
 *
 *      Sideeffects:
 *              May generate subsequent calls to
 *              Tcl_NotifyChannel.
 *
 *      Result:
 *              None.
 *
 *------------------------------------------------------*
 */

static void
ChannelHandler (clientData, mask)
ClientData     clientData;
int            mask;
TlsChannelHandler (clientData, mask)
    ClientData     clientData;
    int            mask;
{
    State *statePtr = (State *) clientData;

dprintf(stderr, "HANDLER(0x%x)\n", mask);
    Tcl_Preserve( (ClientData)statePtr);

    if (mask & TCL_READABLE) {

    
    Tcl_NotifyChannel(statePtr->self, mask);
    
    if (statePtr->timer != (Tcl_TimerToken)NULL) {
	Tcl_DeleteTimerHandler(statePtr->timer);
	statePtr->timer = (Tcl_TimerToken)NULL;
    }
    if ((mask & TCL_READABLE) && Tcl_InputBuffered (statePtr->self) > 0) {
    if ((mask & TCL_READABLE) && Tcl_InputBuffered(statePtr->self) > 0) {
	/*
	 * Data is waiting, flush it out in short time
	 */
	statePtr->timer = Tcl_CreateTimerHandler(TLS_TCL_DELAY,
		ChannelHandlerTimer, (ClientData) statePtr);
		TlsChannelHandlerTimer, (ClientData) statePtr);
    }
    Tcl_Release( (ClientData)statePtr);
}
#endif

/*
 *------------------------------------------------------*
 *
 *	ChannelHandlerTimer --
 *	TlsChannelHandlerTimer --
 *
 *	------------------------------------------------*
 *	Called by the notifier (-> timer) to flush out
 *	information waiting in channel buffers.
 *	------------------------------------------------*
 *
 *	Sideeffects:
 *		As of 'ChannelHandler'.
 *		As of 'TlsChannelHandler'.
 *
 *	Result:
 *		None.
 *
 *------------------------------------------------------*
 */

static void
ChannelHandlerTimer (clientData)
TlsChannelHandlerTimer (clientData)
ClientData clientData; /* Transformation to query */
{
    State *statePtr = (State *) clientData;
    int mask = 0;

    statePtr->timer = (Tcl_TimerToken) NULL;

	/* Not initialized yet! */
	if (statePtr->flags & TLS_TCL_SERVER) {
	    err = SSL_accept(statePtr->ssl);
	} else {
	    err = SSL_connect(statePtr->ssl);
	}
	/*SSL_write(statePtr->ssl, (char*)&err, 0);	HACK!!! */
	if (err > 0)
	if (err > 0) {
	    BIO_flush(statePtr->bio);
	}

	if (err <= 0) {
	    int rc = SSL_get_error(statePtr->ssl, err);

	    if (rc == SSL_ERROR_SSL) {
		Tls_Error(statePtr,
		Tls_Error(statePtr, (char*)ERR_reason_error_string(ERR_get_error()));
			(char *)ERR_reason_error_string(ERR_get_error()));
		*errorCodePtr = ECONNABORTED;
		return -1;
	    } else if (BIO_should_retry(statePtr->bio)) {
		if (statePtr->flags & TLS_TCL_ASYNC) {
		    dprintf(stderr,"E! ");
		    *errorCodePtr = EAGAIN;
		    return -1;
		} else {
		    continue;
		}
	    } else if (err == 0) {
		dprintf(stderr,"CR! ");
		*errorCodePtr = ECONNRESET;
		return -1;
	    }
	    if (statePtr->flags & TLS_TCL_SERVER) {
		err = SSL_get_verify_result(statePtr->ssl);
		if (err != X509_V_OK) {
		    Tls_Error(statePtr,
		    Tls_Error(statePtr, (char*)X509_verify_cert_error_string(err));
			    (char *)X509_verify_cert_error_string(err));
		    *errorCodePtr = ECONNABORTED;
		    return -1;
		}
	    }
	    *errorCodePtr = Tcl_GetErrno();
	    dprintf(stderr,"ERR(%d, %d) ", rc, *errorCodePtr);
	    return -1;
	}
	dprintf(stderr,"R0! ");
	return 1;
    }
}

Tcl_Channel
Tls_GetParent( statePtr )
    State *statePtr;
{
#ifdef TCL_CHANNEL_VERSION_2
    return Tcl_GetStackedChannel(statePtr->self);
#else
#if TCL_MAJOR_VERSION == 8 && TCL_MINOR_VERSION < 2
    return statePtr->parent;
#else
    /* The reason for the existence of this procedure is
     * the fact that stacking a transform over another
     * transform will leave our internal pointer unchanged,
     * and thus pointing to the new transform, and not the
     * Channel structure containing the saved state of this
     * transform. This is the price to pay for leaving
     * Tcl_Channel references intact. The only other solution
     * is an extension of Tcl_ChannelType with another driver
     * procedure to notify a Channel about the (un)stacking.
     *
     * It walks the chain of Channel structures until it
     * finds the one pointing having 'ctrl' as instanceData
     * and then returns the superceding channel to that. (AK)
     */
 
  Tcl_Channel self = statePtr->self;
  Tcl_Channel next;
    Tcl_Channel self = statePtr->self;
    Tcl_Channel next;

  while ((ClientData) statePtr != Tcl_GetChannelInstanceData (self)) {
    next = Tcl_GetStackedChannel (self);
    if (next == (Tcl_Channel) NULL) {
      /* 09/24/1999 Unstacking bug, found by Matt Newman <matt@sensus.org>.
       *
       * We were unable to find the channel structure for this
       * transformation in the chain of stacked channel. This
       * means that we are currently in the process of unstacking
       * it *and* there were some bytes waiting which are now
       * flushed. In this situation the pointer to the channel
       * itself already refers to the parent channel we have to
       * write the bytes into, so we return that.
       */
      return statePtr->self;
    }
    self = next;
  }
    while ((ClientData) statePtr != Tcl_GetChannelInstanceData (self)) {
	next = Tcl_GetStackedChannel (self);
	if (next == (Tcl_Channel) NULL) {
	    /* 09/24/1999 Unstacking bug,
	     * found by Matt Newman <matt@sensus.org>.
	     *
	     * We were unable to find the channel structure for this
	     * transformation in the chain of stacked channel. This
	     * means that we are currently in the process of unstacking
	     * it *and* there were some bytes waiting which are now
	     * flushed. In this situation the pointer to the channel
	     * itself already refers to the parent channel we have to
	     * write the bytes into, so we return that.
	     */
	    return statePtr->self;
	}
	self = next;
    }

  return Tcl_GetStackedChannel (self);
    return Tcl_GetStackedChannel (self);
#endif
#endif
}