DELETED tests/tlsIo.test
Index: tests/tlsIo.test
==================================================================
--- tests/tlsIo.test
+++ /dev/null
@@ -1,2012 +0,0 @@
-# Commands tested in this file: socket.
-#
-# This file contains a collection of tests for one or more of the Tcl
-# built-in commands. Sourcing this file into Tcl runs the tests and
-# generates output for errors. No output means no errors were found.
-#
-# Copyright (c) 1994-1996 Sun Microsystems, Inc.
-# Copyright (c) 1998-2000 Ajuba Solutions.
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-#
-# RCS: @(#) $Id: tlsIo.test,v 1.13 2000/06/05 20:22:34 aborr Exp $
-
-# Running socket tests with a remote server:
-# ------------------------------------------
-#
-# Some tests in socket.test depend on the existence of a remote server to
-# which they connect. The remote server must be an instance of tcltest and it
-# must run the script found in the file "remote.tcl" in this directory. You
-# can start the remote server on any machine reachable from the machine on
-# which you want to run the socket tests, by issuing:
-#
-# tcltest remote.tcl -port 2048 # Or choose another port number.
-#
-# If the machine you are running the remote server on has several IP
-# interfaces, you can choose which interface the server listens on for
-# connections by specifying the -address command line flag, so:
-#
-# tcltest remote.tcl -address your.machine.com
-#
-# These options can also be set by environment variables. On Unix, you can
-# type these commands to the shell from which the remote server is started:
-#
-# shell% setenv serverPort 2048
-# shell% setenv serverAddress your.machine.com
-#
-# and subsequently you can start the remote server with:
-#
-# tcltest remote.tcl
-#
-# to have it listen on port 2048 on the interface your.machine.com.
-#
-# When the server starts, it prints out a detailed message containing its
-# configuration information, and it will block until killed with a Ctrl-C.
-# Once the remote server exists, you can run the tests in socket.test with
-# the server by setting two Tcl variables:
-#
-# % set remoteServerIP <name or address of machine on which server runs>
-# % set remoteServerPort 2048
-#
-# These variables are also settable from the environment. On Unix, you can:
-#
-# shell% setenv remoteServerIP machine.where.server.runs
-# shell% senetv remoteServerPort 2048
-#
-# The preamble of the socket.test file checks to see if the variables are set
-# either in Tcl or in the environment; if they are, it attempts to connect to
-# the server. If the connection is successful, the tests using the remote
-# server will be performed; otherwise, it will attempt to start the remote
-# server (via exec) on platforms that support this, on the local host,
-# listening at port 2048. If all fails, a message is printed and the tests
-# using the remote server are not performed.
-
-if {[lsearch [namespace children] ::tcltest] == -1} {
- package require tcltest
- namespace import -force ::tcltest::*
-}
-
-# Load the tls package
-package require tls
-
-set serverCert [file join $::tcltest::testsDirectory certs server.pem]
-set clientCert [file join $::tcltest::testsDirectory certs client.pem]
-set caCert [file join $::tcltest::testsDirectory certs cacert.pem]
-set serverKey [file join $::tcltest::testsDirectory certs skey.pem]
-set clientKey [file join $::tcltest::testsDirectory certs ckey.pem]
-
-# Some tests require the testthread command
-
-set ::tcltest::testConstraints(testthread) \
- [expr {[info commands testthread] != {}}]
-
-#
-# If remoteServerIP or remoteServerPort are not set, check in the
-# environment variables for externally set values.
-#
-
-if {![info exists remoteServerIP]} {
- if {[info exists env(remoteServerIP)]} {
- set remoteServerIP $env(remoteServerIP)
- }
-}
-if {![info exists remoteServerPort]} {
- if {[info exists env(remoteServerIP)]} {
- set remoteServerPort $env(remoteServerPort)
- } else {
- if {[info exists remoteServerIP]} {
- set remoteServerPort 2048
- }
- }
-}
-
-#
-# Check if we're supposed to do tests against the remote server
-#
-
-set doTestsWithRemoteServer 1
-if {![info exists remoteServerIP] && ($tcl_platform(platform) != "macintosh")} {
- set remoteServerIP 127.0.0.1
-}
-if {($doTestsWithRemoteServer == 1) && (![info exists remoteServerPort])} {
- set remoteServerPort 2048
-}
-
-# Attempt to connect to a remote server if one is already running. If it
-# is not running or for some other reason the connect fails, attempt to
-# start the remote server on the local host listening on port 2048. This
-# is only done on platforms that support exec (i.e. not on the Mac). On
-# platforms that do not support exec, the remote server must be started
-# by the user before running the tests.
-
-set remoteProcChan ""
-set commandSocket ""
-if {$doTestsWithRemoteServer} {
- catch {close $commandSocket}
- if {[catch {set commandSocket [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- $remoteServerIP \
- $remoteServerPort]}] != 0} {
- if {[info commands exec] == ""} {
- set noRemoteTestReason "can't exec"
- set doTestsWithRemoteServer 0
- } else {
- set remoteServerIP 127.0.0.1
- set remoteFile [file join [pwd] remote.tcl]
- if {[catch {set remoteProcChan \
- [open "|[list $::tcltest::tcltest $remoteFile \
- -serverIsSilent \
- -port $remoteServerPort \
- -address $remoteServerIP]" \
- w+]} \
- msg] == 0} {
- after 1000
- if {[catch {set commandSocket [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- $remoteServerIP \
- $remoteServerPort]} msg] == 0} {
- fconfigure $commandSocket -translation crlf -buffering line
- } else {
- set noRemoteTestReason $msg
- set doTestsWithRemoteServer 0
- }
- } else {
- set noRemoteTestReason "$msg $::tcltest::tcltest"
- set doTestsWithRemoteServer 0
- }
- }
- } else {
- fconfigure $commandSocket -translation crlf -buffering line
- }
-}
-
-# Some tests are run only if we are doing testing against a remote server.
-set ::tcltest::testConstraints(doTestsWithRemoteServer) $doTestsWithRemoteServer
-if {$doTestsWithRemoteServer == 0} {
- if {[string first s $::tcltest::verbose] != -1} {
- puts "Skipping tests with remote server. See tests/socket.test for"
- puts "information on how to run remote server."
- puts "Reason for not doing remote tests: $noRemoteTestReason"
- }
-}
-
-#
-# If we do the tests, define a command to send a command to the
-# remote server.
-#
-
-if {$doTestsWithRemoteServer == 1} {
- proc sendCommand {c} {
- global commandSocket
-
- if {[eof $commandSocket]} {
- error "remote server disappeared"
- }
-
- if {[catch {puts $commandSocket $c} msg]} {
- error "remote server disappaered: $msg"
- }
- if {[catch {puts $commandSocket "--Marker--Marker--Marker--"} msg]} {
- error "remote server disappeared: $msg"
- }
-
- set resp ""
- while {1} {
- set line [gets $commandSocket]
- if {[eof $commandSocket]} {
- error "remote server disappeared"
- }
- if {[string compare $line "--Marker--Marker--Marker--"] == 0} {
- if {[string compare [lindex $resp 0] error] == 0} {
- error [lindex $resp 1]
- } else {
- return [lindex $resp 1]
- }
- } else {
- append resp $line "\n"
- }
- }
- }
-}
-
-test tlsIo-1.1 {arg parsing for socket command} {socket} {
- list [catch {tls::socket -server} msg] $msg
-} {1 {wrong # args: should be "tls::socket -server command ?options? port"}}
-
-test tlsIo-1.2 {arg parsing for socket command} {socket} {
- list [catch {tls::socket -server foo} msg] $msg
-} {1 {wrong # args: should be "tls::socket -server command ?options? port"}}
-
-test tlsIo-1.3 {arg parsing for socket command} {socket} {
- list [catch {tls::socket -myaddr} msg] $msg
-} {1 {wrong # args: should be "tls::socket ?options? host port"}}
-
-test tlsIo-1.4 {arg parsing for socket command} {socket} {
- list [catch {tls::socket -myaddr 127.0.0.1} msg] $msg
-} {1 {wrong # args: should be "tls::socket ?options? host port"}}
-
-test tlsIo-1.5 {arg parsing for socket command} {socket} {
- list [catch {tls::socket -myport} msg] $msg
-} {1 {wrong # args: should be "tls::socket ?options? host port"}}
-
-test tlsIo-1.6 {arg parsing for socket command} {socket} {
- list [catch {tls::socket -myport xxxx} msg] $msg
-} {1 {wrong # args: should be "tls::socket ?options? host port"}}
-
-test tlsIo-1.7 {arg parsing for socket command} {socket} {
- list [catch {tls::socket -myport 2522} msg] $msg
-} {1 {wrong # args: should be "tls::socket ?options? host port"}}
-
-test tlsIo-1.8 {arg parsing for socket command} {socket} {
- list [catch {tls::socket -froboz} msg] $msg
-} {1 {wrong # args: should be "tls::socket ?options? host port"}}
-
-test tlsIo-1.9 {arg parsing for socket command} {socket} {
- list [catch {tls::socket -server foo -myport 2521 3333} msg] $msg
-} {1 {wrong # args: should be "tls::socket -server command ?options? port"}}
-
-test tlsIo-1.10 {arg parsing for socket command} {socket} {
- list [catch {tls::socket host 2528 -junk} msg] $msg
-} {1 {wrong # args: should be "tls::socket ?options? host port"}}
-
-test tlsIo-1.11 {arg parsing for socket command} {socket} {
- list [catch {tls::socket -server callback 2520 --} msg] $msg
-} {1 {wrong # args: should be "tls::socket -server command ?options? port"}}
-
-test tlsIo-1.12 {arg parsing for socket command} {socket} {
- list [catch {tls::socket foo badport} msg] $msg
-} {1 {expected integer but got "badport"}}
-
-test tlsIo-2.1 {tcp connection} {socket stdio} {
- removeFile script
- set f [open script w]
- puts $f {
- package require tls
- set timer [after 2000 "set x timed_out"]
- }
- puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2828 \]"
- puts $f {
- proc accept {file addr port} {
- global x
- set x done
- close $file
- }
- puts ready
- vwait x
- after cancel $timer
- close $f
- puts $x
- }
- close $f
- set f [open "|[list $::tcltest::tcltest script]" r]
- gets $f x
- if {[catch {tls::socket -certfile $clientCert -cafile $caCert \
- -keyfile $clientKey 127.0.0.1 2828} msg]} {
- set x $msg
- } else {
- lappend x [gets $f]
- close $msg
- }
- lappend x [gets $f]
- close $f
- set x
-} {ready done {}}
-
-if [info exists port] {
- incr port
-} else {
- set port [expr 2048 + [pid]%1024]
-}
-
-test tlsIo-2.2 {tcp connection with client port specified} {socket stdio} {
- removeFile script
- set f [open script w]
- puts $f {
- package require tls
- set timer [after 2000 "set x done"]
- }
- puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2829 \]"
- puts $f {
- proc accept {file addr port} {
- global x
- puts "[gets $file] $port"
- close $file
- set x done
- }
- puts ready
- vwait x
- after cancel $timer
- close $f
- }
- close $f
- set f [open "|[list $::tcltest::tcltest script]" r]
- gets $f x
- global port
- if {[catch {tls::socket -myport $port \
- -certfile $clientCert -cafile $caCert \
- -keyfile $clientKey 127.0.0.1 2829} sock]} {
- set x $sock
- catch {close [tls::socket 127.0.0.1 2829]}
- } else {
- puts $sock hello
- flush $sock
- lappend x [gets $f]
- close $sock
- }
- close $f
- set x
-} [list ready "hello $port"]
-
-test tlsIo-2.3 {tcp connection with client interface specified} {socket stdio} {
- removeFile script
- set f [open script w]
- puts $f {
- package require tls
- set timer [after 2000 "set x done"]
- }
- puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2830 \]"
- puts $f {
- proc accept {file addr port} {
- global x
- puts "[gets $file] $addr"
- close $file
- set x done
- }
- puts ready
- vwait x
- after cancel $timer
- close $f
- }
- close $f
- set f [open "|[list $::tcltest::tcltest script]" r]
- gets $f x
- if {[catch {tls::socket -myaddr 127.0.0.1 \
- -certfile $clientCert -cafile $caCert \
- -keyfile $clientKey 127.0.0.1 2830} sock]} {
- set x $sock
- } else {
- puts $sock hello
- catch {flush $sock}
- lappend x [gets $f]
- close $sock
- }
- close $f
- set x
-} {ready {hello 127.0.0.1}}
-
-test tlsIo-2.4 {tcp connection with server interface specified} {socket stdio} {
- removeFile script
- set f [open script w]
- puts $f {
- package require tls
- set timer [after 2000 "set x done"]
- }
- puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey -myaddr [info hostname] 2831 \]"
- puts $f {
- proc accept {file addr port} {
- global x
- puts "[gets $file]"
- close $file
- set x done
- }
- puts ready
- vwait x
- after cancel $timer
- close $f
- }
- close $f
- set f [open "|[list $::tcltest::tcltest script]" r]
- gets $f x
- if {[catch {tls::socket -certfile $clientCert -cafile $caCert \
- -keyfile $clientKey [info hostname] 2831} sock]} {
- set x $sock
- } else {
- puts $sock hello
- flush $sock
- lappend x [gets $f]
- close $sock
- }
- close $f
- set x
-} {ready hello}
-
-test tlsIo-2.5 {tcp connection with redundant server port} {socket stdio} {
- removeFile script
- set f [open script w]
- puts $f {
- package require tls
- set timer [after 2000 "set x done"]
- }
- puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2832 \]"
- puts $f {
- proc accept {file addr port} {
- global x
- puts "[gets $file]"
- close $file
- set x done
- }
- puts ready
- vwait x
- after cancel $timer
- close $f
- }
- close $f
- set f [open "|[list $::tcltest::tcltest script]" r]
- gets $f x
- if {[catch {tls::socket -certfile $clientCert -cafile $caCert \
- -keyfile $clientKey 127.0.0.1 2832} sock]} {
- set x $sock
- } else {
- puts $sock hello
- flush $sock
- lappend x [gets $f]
- close $sock
- }
- close $f
- set x
-} {ready hello}
-test tlsIo-2.6 {tcp connection} {socket} {
- set status ok
- if {![catch {set sock [tls::socket 127.0.0.1 2833]}]} {
- if {![catch {gets $sock}]} {
- set status broken
- }
- close $sock
- }
- set status
-} ok
-
-test tlsIo-2.7 {echo server, one line} {socket stdio} {
- removeFile script
- set f [open script w]
- puts $f {
- package require tls
- set timer [after 2000 "set x done"]
- }
- puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2834 \]"
- puts $f {
- proc accept {s a p} {
- fileevent $s readable [list echo $s]
- fconfigure $s -translation lf -buffering line
- }
- proc echo {s} {
- set l [gets $s]
- if {[eof $s]} {
- global x
- close $s
- set x done
- } else {
- puts $s $l
- }
- }
- puts ready
- vwait x
- after cancel $timer
- close $f
- puts done
- }
- close $f
- set f [open "|[list $::tcltest::tcltest script]" r]
- gets $f
- set s [tls::socket -certfile $clientCert -cafile $caCert \
- -keyfile $clientKey 127.0.0.1 2834]
- fconfigure $s -buffering line -translation lf
- puts $s "hello abcdefghijklmnop"
- after 1000
- set x [gets $s]
- close $s
- set y [gets $f]
- close $f
- list $x $y
-} {{hello abcdefghijklmnop} done}
-
-test tlsIo-2.8 {echo server, loop 50 times, single connection} {socket stdio} {
- set f [open script w]
- puts $f {
- package require tls
- }
- puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2835 \]"
- puts $f {
- proc accept {s a p} {
- fileevent $s readable [list echo $s]
- fconfigure $s -buffering line
- }
- proc echo {s} {
- global i
- set l [gets $s]
- if {[eof $s]} {
- global x
- close $s
- set x done
- } else {
- incr i
- puts $s $l
- }
- }
- set i 0
- puts ready
- set timer [after 20000 "set x done"]
- vwait x
- after cancel $timer
- close $f
- puts "done $i"
- }
- close $f
- set f [open "|[list $::tcltest::tcltest script]" r]
- gets $f
- set s [tls::socket -certfile $clientCert -cafile $caCert \
- -keyfile $clientKey 127.0.0.1 2835]
- fconfigure $s -buffering line
- catch {
- for {set x 0} {$x < 50} {incr x} {
- puts $s "hello abcdefghijklmnop"
- gets $s
- }
- }
- close $s
- catch {set x [gets $f]}
- close $f
- set x
-} {done 50}
-
-test tlsIo-2.9 {socket conflict} {socket stdio} {
- set s [tls::socket -server accept 2828]
- removeFile script
- set f [open script w]
- puts -nonewline $f {package require tls; tls::socket -server accept 2828}
- close $f
- set f [open "|[list $::tcltest::tcltest script]" r]
- gets $f
- after 100
- set x [list [catch {close $f} msg] $msg]
- close $s
- set x
-} {1 {couldn't open socket: address already in use
- while executing
-"::socket -server {tls::_accept {-server 1} accept} 2828"
- ("eval" body line 1)
- invoked from within
-"eval ::socket $sopts"
- (procedure "tls::socket" line 62)
- invoked from within
-"tls::socket -server accept 2828"
- (file "script" line 1)}}
-
-test tlsIo-2.10 {close on accept, accepted socket lives} {socket knownBug} {
- set done 0
- set timer [after 20000 "set done timed_out"]
- set ss [tls::socket -server accept -certfile $serverCert -cafile $caCert \
- -keyfile $serverKey 2830]
- proc accept {s a p} {
- global ss
- close $ss
- fileevent $s readable "readit $s"
- fconfigure $s -trans lf
- }
- proc readit {s} {
- global done
- gets $s
- close $s
- set done 1
- }
- set cs [tls::socket -certfile $clientCert -cafile $caCert \
- -keyfile $clientKey [info hostname] 2830]
- close $cs
-
- vwait done
- after cancel $timer
- set done
-} 1
-
-test tlsIo-2.11 {detecting new data} {socket knownBug} {
- proc accept {s a p} {
- global sock
- set sock $s
- set f [open awb.log w]
- puts $f [catch {tls::handshake $sock} err]
- puts $f "err: $err"
- puts $f "[tls::status $sock]"
- close $s
- }
-
- set s [tls::socket -require 0 -request 0 -server accept -certfile $serverCert -cafile $caCert \
- -keyfile $serverKey 2400]
- set sock ""
- set s2 [tls::socket -certfile $clientCert -cafile $caCert \
- -keyfile $clientKey 127.0.0.1 2400]
- vwait sock
- puts $s2 one
- flush $s2
- after 500
- fconfigure $sock -blocking 0
- set result [gets $sock]
- lappend result [gets $sock]
- fconfigure $sock -blocking 1
- puts $s2 two
- flush $s2
- fconfigure $sock -blocking 0
- lappend result [gets $sock]
- fconfigure $sock -blocking 1
- close $s2
- close $s
- close $sock
- set result
-} {one {} two}
-
-test tlsIo-2.12 {tcp connection; no certificates specified} {socket stdio pcCrash} {
- removeFile script
- set f [open script w]
- puts $f {
- package require tls
- set timer [after 2000 "set x timed_out"]
- set f [tls::socket -server accept 2828]
- proc accept {file addr port} {
- global x
- set x done
- close $file
- }
- puts ready
- vwait x
- after cancel $timer
- close $f
- puts $x
- }
- close $f
- set f [open "|[list $::tcltest::tcltest script]" r]
- gets $f x
- if {[catch {tls::socket 127.0.0.1 2828} msg]} {
- set x $msg
- } else {
- lappend x [gets $f]
- close $msg
- }
- lappend x [gets $f]
- close $f
- set x
-} {ready done {}}
-
-
-
-
-#################################
-if {[string match sock* $commandSocket] == 1} {
- puts $commandSocket exit
- flush $commandSocket
-}
-catch {close $commandSocket}
-catch {close $remoteProcChan}
-::tcltest::cleanupTests
-flush stdout
-return
-#################################
-test tlsIo-3.1 {socket conflict} {socket stdio} {
- removeFile script
- set f [open script w]
- puts $f {
- package require tls
- }
- puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2828 \]"
- puts $f {
- puts ready
- gets stdin
- close $f
- }
- close $f
- set f [open "|[list $::tcltest::tcltest script]" r+]
- gets $f
- set x [list [catch {tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- -server accept 2828} msg] \
- $msg]
- puts $f bye
- close $f
- set x
-} {1 {couldn't open socket: address already in use}}
-
-test tlsIo-3.2 {server with several clients} {socket stdio} {
- removeFile script
- set f [open script w]
- puts $f {
- package require tls
- set t1 [after 30000 "set x timed_out"]
- set t2 [after 31000 "set x timed_out"]
- set t3 [after 32000 "set x timed_out"]
- set counter 0
- }
- puts $f "set s \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2828 \]"
- puts $f {
- proc accept {s a p} {
- fileevent $s readable [list echo $s]
- fconfigure $s -buffering line
- }
- proc echo {s} {
- global x
- set l [gets $s]
- if {[eof $s]} {
- close $s
- set x done
- } else {
- puts $s $l
- }
- }
- puts ready
- vwait x
- after cancel $t1
- vwait x
- after cancel $t2
- vwait x
- after cancel $t3
- close $s
- puts $x
- }
- close $f
- set f [open "|[list $::tcltest::tcltest script]" r+]
- set x [gets $f]
- set s1 [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- 127.0.0.1 2828]
- fconfigure $s1 -buffering line
- set s2 [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- 127.0.0.1 2828]
- fconfigure $s2 -buffering line
- set s3 [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- 127.0.0.1 2828]
- fconfigure $s3 -buffering line
- for {set i 0} {$i < 100} {incr i} {
- puts $s1 hello,s1
- gets $s1
- puts $s2 hello,s2
- gets $s2
- puts $s3 hello,s3
- gets $s3
- }
- close $s1
- close $s2
- close $s3
- lappend x [gets $f]
- close $f
- set x
-} {ready done}
-
-test tlsIo-4.1 {server with several clients} {socket stdio} {
- removeFile script
- set f [open script w]
- puts $f {
- package require tls
- gets stdin
- }
- puts $f "set s \[tls::socket -certfile $clientCert -cafile $caCert -keyfile $clientKey 127.0.0.1 2828 \]"
- puts $f {
- fconfigure $s -buffering line
- for {set i 0} {$i < 100} {incr i} {
- puts $s hello
- gets $s
- }
- close $s
- puts bye
- gets stdin
- }
- close $f
- set p1 [open "|[list $::tcltest::tcltest script]" r+]
- fconfigure $p1 -buffering line
- set p2 [open "|[list $::tcltest::tcltest script]" r+]
- fconfigure $p2 -buffering line
- set p3 [open "|[list $::tcltest::tcltest script]" r+]
- fconfigure $p3 -buffering line
- proc accept {s a p} {
- fconfigure $s -buffering line
- fileevent $s readable [list echo $s]
- }
- proc echo {s} {
- global x
- set l [gets $s]
- if {[eof $s]} {
- close $s
- set x done
- } else {
- puts $s $l
- }
- }
- set t1 [after 30000 "set x timed_out"]
- set t2 [after 31000 "set x timed_out"]
- set t3 [after 32000 "set x timed_out"]
- set s [tls::socket \
- -certfile $serverCert -cafile $caCert -keyfile $serverKey \
- -server accept 2828]
- puts $p1 open
- puts $p2 open
- puts $p3 open
- vwait x
- vwait x
- vwait x
- after cancel $t1
- after cancel $t2
- after cancel $t3
- close $s
- set l ""
- lappend l [list p1 [gets $p1] $x]
- lappend l [list p2 [gets $p2] $x]
- lappend l [list p3 [gets $p3] $x]
- puts $p1 bye
- puts $p2 bye
- puts $p3 bye
- close $p1
- close $p2
- close $p3
- set l
-} {{p1 bye done} {p2 bye done} {p3 bye done}}
-
-test tlsIo-4.2 {byte order problems, socket numbers, htons} {socket} {
- set x ok
- if {[catch {tls::socket -server dodo 0x3000} msg]} {
- set x $msg
- } else {
- close $msg
- }
- set x
-} ok
-
-test tlsIo-5.1 {byte order problems, socket numbers, htons} \
- {socket unixOnly notRoot} {
- set x {couldn't open socket: not owner}
- if {![catch {tls::socket -server dodo 0x1} msg]} {
- set x {htons problem, should be disallowed, are you running as SU?}
- close $msg
- }
- set x
-} {couldn't open socket: not owner}
-test tlsIo-5.2 {byte order problems, socket numbers, htons} {socket} {
- set x {couldn't open socket: port number too high}
- if {![catch {tls::socket -server dodo 0x10000} msg]} {
- set x {port resolution problem, should be disallowed}
- close $msg
- }
- set x
-} {couldn't open socket: port number too high}
-test tlsIo-5.3 {byte order problems, socket numbers, htons} \
- {socket unixOnly notRoot} {
- set x {couldn't open socket: not owner}
- if {![catch {tls::socket -server dodo 21} msg]} {
- set x {htons problem, should be disallowed, are you running as SU?}
- close $msg
- }
- set x
-} {couldn't open socket: not owner}
-
-test tlsIo-6.1 {accept callback error} {socket stdio pcCrash} {
- removeFile script
- set f [open script w]
- puts $f {
- package require tls
- gets stdin
- tls::socket 127.0.0.1 2848
- }
- close $f
- set f [open "|[list $::tcltest::tcltest script]" r+]
- proc bgerror args {
- global x
- set x $args
- }
- proc accept {s a p} {expr 10 / 0}
- set s [tls::socket -server accept 2848]
- puts $f hello
- close $f
- set timer [after 10000 "set x timed_out"]
- vwait x
- after cancel $timer
- close $s
- rename bgerror {}
- set x
-} {{divide by zero}}
-
-test tlsIo-7.1 {testing socket specific options} {socket stdio} {
- removeFile script
- set f [open script w]
- puts $f {
- package require tls
- }
- puts $f "tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2820"
- puts $f {
- proc accept args {
- global x
- set x done
- }
- puts ready
- set timer [after 10000 "set x timed_out"]
- vwait x
- after cancel $timer
- }
- close $f
- set f [open "|[list $::tcltest::tcltest script]" r]
- gets $f
- set s [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- 127.0.0.1 2820]
- set p [fconfigure $s -peername]
- close $s
- close $f
- set l ""
- lappend l [string compare [lindex $p 0] 127.0.0.1]
- lappend l [string compare [lindex $p 2] 2820]
- lappend l [llength $p]
-} {0 0 3}
-
-test tlsIo-7.2 {testing socket specific options} {socket stdio} {
- removeFile script
- set f [open script w]
- puts $f {
- package require tls
- }
- puts $f "tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2821"
- puts $f {
- proc accept args {
- global x
- set x done
- }
- puts ready
- set timer [after 10000 "set x timed_out"]
- vwait x
- after cancel $timer
- }
- close $f
- set f [open "|[list $::tcltest::tcltest script]" r]
- gets $f
- set s [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- 127.0.0.1 2821]
- set p [fconfigure $s -sockname]
- close $s
- close $f
- set l ""
- lappend l [llength $p]
- lappend l [lindex $p 0]
- lappend l [string equal [lindex $p 2] 2821]
-} {3 127.0.0.1 0}
-
-test tlsIo-7.3 {testing socket specific options} {socket} {
- set s [tls::socket \
- -certfile $serverCert -cafile $caCert -keyfile $serverKey \
- -server accept 2822]
- set l [fconfigure $s]
- close $s
- update
- llength $l
-} 12
-
-test tlsIo-7.4 {testing socket specific options} {socket} {
- set s [tls::socket \
- -certfile $serverCert -cafile $caCert -keyfile $serverKey \
- -server accept 2823]
- proc accept {s a p} {
- global x
- set x [fconfigure $s -sockname]
- close $s
- }
- set s1 [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- [info hostname] 2823]
- set timer [after 10000 "set x timed_out"]
- vwait x
- after cancel $timer
- close $s
- close $s1
- set l ""
- lappend l [lindex $x 2] [llength $x]
-} {2823 3}
-
-test tlsIo-7.5 {testing socket specific options} {socket unixOrPc} {
- set s [tls::socket \
- -certfile $serverCert -cafile $caCert -keyfile $serverKey \
- -server accept 2829]
- proc accept {s a p} {
- global x
- set x [fconfigure $s -sockname]
- close $s
- }
- set s1 [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- 127.0.0.1 2829]
- set timer [after 10000 "set x timed_out"]
- vwait x
- after cancel $timer
- close $s
- close $s1
- set l ""
- lappend l [lindex $x 0] [lindex $x 2] [llength $x]
-} {127.0.0.1 2829 3}
-
-test tlsIo-8.1 {testing -async flag on sockets} {empty socket} {
- # test seems to hang -- awb 6/2/2000
- # NOTE: This test may fail on some Solaris 2.4 systems. If it does,
- # check that you have these patches installed (using showrev -p):
- #
- # 101907-05, 101925-02, 101945-14, 101959-03, 101969-05, 101973-03,
- # 101977-03, 101981-02, 101985-01, 102001-03, 102003-01, 102007-01,
- # 102011-02, 102024-01, 102039-01, 102044-01, 102048-01, 102062-03,
- # 102066-04, 102070-01, 102105-01, 102153-03, 102216-01, 102232-01,
- # 101878-03, 101879-01, 101880-03, 101933-01, 101950-01, 102030-01,
- # 102057-08, 102140-01, 101920-02, 101921-09, 101922-07, 101923-03
- #
- # If after installing these patches you are still experiencing a
- # problem, please email jyl@eng.sun.com. We have not observed this
- # failure on Solaris 2.5, so another option (instead of installing
- # these patches) is to upgrade to Solaris 2.5.
- set s [tls::socket \
- -certfile $serverCert -cafile $caCert -keyfile $serverKey \
- -server accept 2830]
- proc accept {s a p} {
- global x
- puts $s bye
- close $s
- set x done
- }
- set s1 [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- -async [info hostname] 2830]
- vwait x
- set z [gets $s1]
- close $s
- close $s1
- set z
-} bye
-
-test tlsIo-9.1 {testing spurious events} {empty socket} {
- # locks up
- set len 0
- set spurious 0
- set done 0
- proc readlittle {s} {
- global spurious done len
- set l [read $s 1]
- if {[string length $l] == 0} {
- if {![eof $s]} {
- incr spurious
- } else {
- close $s
- set done 1
- }
- } else {
- incr len [string length $l]
- }
- }
- proc accept {s a p} {
- fconfigure $s -buffering none -blocking off
- fileevent $s readable [list readlittle $s]
- }
- set s [tls::socket \
- -certfile $serverCert -cafile $caCert -keyfile $serverKey \
- -server accept 2831]
- set c [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- [info hostname] 2831]
- puts -nonewline $c 01234567890123456789012345678901234567890123456789
- close $c
- set timer [after 10000 "set done timed_out"]
- vwait done
- after cancel $timer
- close $s
- list $spurious $len
-} {0 50}
-
-test tlsIo-9.2 {testing async write, fileevents, flush on close} {socket} {
- set firstblock ""
- for {set i 0} {$i < 5} {incr i} {set firstblock "a$firstblock$firstblock"}
- set secondblock ""
- for {set i 0} {$i < 16} {incr i} {
- set secondblock "b$secondblock$secondblock"
- }
- set l [tls::socket \
- -certfile $serverCert -cafile $caCert -keyfile $serverKey \
- -server accept 2832]
- proc accept {s a p} {
- fconfigure $s -blocking 0 -translation lf -buffersize 16384 \
- -buffering line
- fileevent $s readable "readable $s"
- }
- proc readable {s} {
- set l [gets $s]
- fileevent $s readable {}
- after 1000 respond $s
- }
- proc respond {s} {
- global firstblock
- puts -nonewline $s $firstblock
- after 1000 writedata $s
- }
- proc writedata {s} {
- global secondblock
- puts -nonewline $s $secondblock
- close $s
- }
- set s [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- [info hostname] 2832]
- fconfigure $s -blocking 0 -trans lf -buffering line
- set count 0
- puts $s hello
- proc readit {s} {
- global count done
- set l [read $s]
- incr count [string length $l]
- if {[eof $s]} {
- close $s
- set done 1
- }
- }
- fileevent $s readable "readit $s"
- set timer [after 10000 "set done timed_out"]
- vwait done
- after cancel $timer
- close $l
- set count
-} 65566
-
-test tlsIo-9.3 {testing EOF stickyness} {empty socket} {
- # hangs
- proc count_to_eof {s} {
- global count done timer
- set l [gets $s]
- if {[eof $s]} {
- incr count
- if {$count > 9} {
- close $s
- set done true
- set count {eof is sticky}
- after cancel $timer
- }
- }
- }
- proc timerproc {} {
- global done count c
- set done true
- set count {timer went off, eof is not sticky}
- close $c
- }
- set count 0
- set done false
- proc write_then_close {s} {
- puts $s bye
- close $s
- }
- proc accept {s a p} {
- fconfigure $s -buffering line -translation lf
- fileevent $s writable "write_then_close $s"
- }
- set s [tls::socket \
- -certfile $serverCert -cafile $caCert -keyfile $serverKey \
- -server accept 2833]
- set c [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- [info hostname] 2833]
- fconfigure $c -blocking off -buffering line -translation lf
- fileevent $c readable "count_to_eof $c"
- set timer [after 1000 timerproc]
- vwait done
- close $s
- set count
-} {eof is sticky}
-
-removeFile script
-
-test tlsIo-10.1 {testing socket accept callback error handling} {socket} {
- set goterror 0
- proc bgerror args {global goterror; set goterror 1}
- set s [tls::socket \
- -certfile $serverCert -cafile $caCert -keyfile $serverKey \
- -server accept 2898]
- proc accept {s a p} {close $s; error}
- set c [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- 127.0.0.1 2898]
- vwait goterror
- close $s
- close $c
- set goterror
-} 1
-
-test tlsIo-11.1 {tcp connection} {socket doTestsWithRemoteServer} {
- sendCommand "set caCert $caCert"
- sendCommand "set serverCert $serverCert"
- sendCommand "set clientCert $clientCert"
- sendCommand "set serverKey $serverKey"
- sendCommand "set clientKey $clientKey"
- sendCommand {
- set socket9_1_test_server [tls::socket -server accept \
- -certfile $serverCert \
- -cafile $caCert \
- -keyfile $serverKey \
- 2834]
- proc accept {s a p} {
- puts $s done
- tls::handshake $s
- close $s
- }
- }
- set s [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- $remoteServerIP 2834]
- set r [gets $s]
- close $s
- sendCommand {close $socket9_1_test_server}
- set r
-} done
-
-test tlsIo-11.2 {client specifies its port} {socket doTestsWithRemoteServer} {
- sendCommand "set caCert $caCert"
- sendCommand "set serverCert $serverCert"
- sendCommand "set clientCert $clientCert"
- sendCommand "set serverKey $serverKey"
- sendCommand "set clientKey $clientKey"
- if {[info exists port]} {
- incr port
- } else {
- set port [expr 2048 + [pid]%1024]
- }
- sendCommand {
- set socket9_2_test_server [tls::socket -server accept \
- -certfile $serverCert \
- -cafile $caCert \
- -keyfile $serverKey \
- 2835]
- proc accept {s a p} {
- tls::handshake $s
- puts $s $p
- close $s
- }
- }
- set s [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- -myport $port $remoteServerIP 2835]
- set r [gets $s]
- close $s
- sendCommand {close $socket9_2_test_server}
- if {$r == $port} {
- set result ok
- } else {
- set result broken
- }
- set result
-} ok
-test tlsIo-11.3 {trying to connect, no server} {socket doTestsWithRemoteServer} {
- set status ok
- if {![catch {set s [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- $remoteServerIp 2836]}]} {
- if {![catch {gets $s}]} {
- set status broken
- }
- close $s
- }
- set status
-} ok
-
-test tlsIo-11.4 {remote echo, one line} {socket doTestsWithRemoteServer} {
- sendCommand "set caCert $caCert"
- sendCommand "set serverCert $serverCert"
- sendCommand "set clientCert $clientCert"
- sendCommand "set serverKey $serverKey"
- sendCommand "set clientKey $clientKey"
- sendCommand {
- global serverCert
- global caCert
- global serverKey
- set socket10_6_test_server [tls::socket \
- -certfile $serverCert \
- -cafile $caCert \
- -keyfile $serverKey \
- -server accept 2836]
- proc accept {s a p} {
- tls::handshake $s
- fileevent $s readable [list echo $s]
- fconfigure $s -buffering line -translation crlf
- }
- proc echo {s} {
- set l [gets $s]
- if {[eof $s]} {
- close $s
- } else {
- puts $s $l
- }
- }
- }
- set f [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- $remoteServerIP 2836]
- fconfigure $f -translation crlf -buffering line
- puts $f hello
- set r [gets $f]
- close $f
- sendCommand {close $socket10_6_test_server}
- set r
-} hello
-
-test tlsIo-11.5 {remote echo, 50 lines} {socket doTestsWithRemoteServer} {
- sendCommand "set caCert $caCert"
- sendCommand "set serverCert $serverCert"
- sendCommand "set clientCert $clientCert"
- sendCommand "set serverKey $serverKey"
- sendCommand "set clientKey $clientKey"
- sendCommand {
- set socket10_7_test_server [tls::socket -server accept \
- -certfile $serverCert \
- -cafile $caCert \
- -keyfile $serverKey \
- 2836]
- proc accept {s a p} {
- tls::handshake $s
- fileevent $s readable [list echo $s]
- fconfigure $s -buffering line -translation crlf
- }
- proc echo {s} {
- set l [gets $s]
- if {[eof $s]} {
- close $s
- } else {
- puts $s $l
- }
- }
- }
- set f [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- $remoteServerIP 2836]
- fconfigure $f -translation crlf -buffering line
- for {set cnt 0} {$cnt < 50} {incr cnt} {
- puts $f "hello, $cnt"
- if {[string compare [gets $f] "hello, $cnt"] != 0} {
- break
- }
- }
- close $f
- sendCommand {close $socket10_7_test_server}
- set cnt
-} 50
-
-# Macintosh sockets can have more than one server per port
-if {$tcl_platform(platform) == "macintosh"} {
- set conflictResult {0 2836}
-} else {
- set conflictResult {1 {couldn't open socket: address already in use}}
-}
-
-test tlsIo-11.6 {socket conflict} {socket doTestsWithRemoteServer} {
- set s1 [tls::socket \
- -certfile $serverCert -cafile $caCert -keyfile $serverKey \
- -server accept 2836]
- if {[catch {set s2 [tls::socket \
- -certfile $serverCert -cafile $caCert -keyfile $serverKey \
- -server accept 2836]} msg]} {
- set result [list 1 $msg]
- } else {
- set result [list 0 [lindex [fconfigure $s2 -sockname] 2]]
- close $s2
- }
- close $s1
- set result
-} $conflictResult
-
-test tlsIo-11.7 {server with several clients} {socket doTestsWithRemoteServer} {
- sendCommand {
- set socket10_9_test_server [tls::socket \
- -certfile [file join [pwd] certs server.pem] \
- -cafile [file join [pwd] certs caFile.pem] \
- -keyfile [file join [pwd] certs skey.pem] \
- -server accept 2836]
- proc accept {s a p} {
- # handshake locks up the three synchronous clients
- # tls::handshake $s
- fconfigure $s -buffering line
- fileevent $s readable [list echo $s]
- }
- proc echo {s} {
- set l [gets $s]
- if {[eof $s]} {
- close $s
- } else {
- puts $s $l
- }
- }
- }
- set s1 [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- $remoteServerIP 2836]
- fconfigure $s1 -buffering line
- set s2 [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- $remoteServerIP 2836]
- fconfigure $s2 -buffering line
- set s3 [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- $remoteServerIP 2836]
- fconfigure $s3 -buffering line
- for {set i 0} {$i < 100} {incr i} {
- puts $s1 hello,s1
- gets $s1
- puts $s2 hello,s2
- gets $s2
- puts $s3 hello,s3
- gets $s3
- }
- close $s1
- close $s2
- close $s3
- sendCommand {close $socket10_9_test_server}
- set i
-} 100
-
-test tlsIo-11.8 {client with several servers} {empty socket doTestsWithRemoteServer} {
- # this one seems to hang -- awb 6/2/2000
- sendCommand {
- set s1 [tls::socket \
- -certfile [file join [pwd] certs server.pem] \
- -cafile [file join [pwd] certs caFile.pem] \
- -keyfile [file join [pwd] certs skey.pem] \
- -server "accept 4003" 4003]
- set s2 [tls::socket \
- -certfile [file join [pwd] certs server.pem] \
- -cafile [file join [pwd] certs caFile.pem] \
- -keyfile [file join [pwd] certs skey.pem] \
- -server "accept 4004" 4004]
- set s3 [tls::socket \
- -certfile [file join [pwd] certs server.pem] \
- -cafile [file join [pwd] certs caFile.pem] \
- -keyfile [file join [pwd] certs skey.pem] \
- -server "accept 4005" 4005]
- proc accept {mp s a p} {
- tls::handshake $s
- puts $s $mp
- close $s
- }
- }
- set s1 [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- $remoteServerIP 4003]
- set s2 [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- $remoteServerIP 4004]
- set s3 [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- $remoteServerIP 4005]
- set l ""
- lappend l [gets $s1] [gets $s1] [eof $s1] [gets $s2] [gets $s2] [eof $s2] \
- [gets $s3] [gets $s3] [eof $s3]
- close $s1
- close $s2
- close $s3
- sendCommand {
- close $s1
- close $s2
- close $s3
- }
- set l
-} {4003 {} 1 4004 {} 1 4005 {} 1}
-
-test tlsIo-11.9 {accept callback error} {socket doTestsWithRemoteServer} {
- set s [tls::socket \
- -certfile $serverCert -cafile $caCert -keyfile $serverKey \
- -server accept 2836]
- proc accept {s a p} {expr 10 / 0}
- proc bgerror args {
- global x
- set x $args
- }
- sendCommand "set caCert $caCert"
- sendCommand "set serverCert $serverCert"
- sendCommand "set clientCert $clientCert"
- sendCommand "set serverKey $serverKey"
- sendCommand "set clientKey $clientKey"
- if {[catch {sendCommand {
- set peername [fconfigure $callerSocket -peername]
- set s [tls::socket \
- -certfile $clientCert \
- -cafile $caCert \
- -keyfile $clientKey \
- [lindex $peername 0] 2836]
- close $s
- }} msg]} {
- close $s
- error $msg
- }
- set timer [after 10000 "set x timed_out"]
- vwait x
- after cancel $timer
- close $s
- rename bgerror {}
- set x
-} {{divide by zero}}
-
-test tlsIo-11.10 {testing socket specific options} {socket doTestsWithRemoteServer} {
- sendCommand "set caCert $caCert"
- sendCommand "set serverCert $serverCert"
- sendCommand "set clientCert $clientCert"
- sendCommand "set serverKey $serverKey"
- sendCommand "set clientKey $clientKey"
- sendCommand {
- set socket10_12_test_server [tls::socket \
- -certfile $serverCert \
- -cafile $caCert \
- -keyfile $serverKey \
- -server accept 2836]
- proc accept {s a p} {close $s}
- }
- set s [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- $remoteServerIP 2836]
- set p [fconfigure $s -peername]
- set n [fconfigure $s -sockname]
- set l ""
- lappend l [lindex $p 2] [llength $p] [llength $p]
- close $s
- sendCommand {close $socket10_12_test_server}
- set l
-} {2836 3 3}
-
-test tlsIo-11.11 {testing spurious events} {empty socket doTestsWithRemoteServer} {
- # hangs
- sendCommand "set caCert $caCert"
- sendCommand "set serverCert $serverCert"
- sendCommand "set clientCert $clientCert"
- sendCommand "set serverKey $serverKey"
- sendCommand "set clientKey $clientKey"
- sendCommand {
- set socket10_13_test_server [tls::socket \
- -certfile $serverCert \
- -cafile $caCert \
- -keyfile $serverKey \
- -server accept 2836]
- proc accept {s a p} {
- tls::handshake $s
- fconfigure $s -translation "auto lf"
- after 100 writesome $s
- }
- proc writesome {s} {
- for {set i 0} {$i < 100} {incr i} {
- puts $s "line $i from remote server"
- }
- close $s
- }
- }
- set len 0
- set spurious 0
- set done 0
- proc readlittle {s} {
- global spurious done len
- set l [read $s 1]
- if {[string length $l] == 0} {
- if {![eof $s]} {
- incr spurious
- } else {
- close $s
- set done 1
- }
- } else {
- incr len [string length $l]
- }
- }
- set c [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- $remoteServerIP 2836]
- fileevent $c readable "readlittle $c"
- set timer [after 10000 "set done timed_out"]
- vwait done
- after cancel $timer
- sendCommand {close $socket10_13_test_server}
- list $spurious $len
-} {0 2690}
-
-test tlsIo-11.12 {testing EOF stickyness} {socket doTestsWithRemoteServer} {
- set counter 0
- set done 0
- proc count_up {s} {
- global counter done after_id
- set l [gets $s]
- if {[eof $s]} {
- incr counter
- if {$counter > 9} {
- set done {EOF is sticky}
- after cancel $after_id
- close $s
- }
- }
- }
- proc timed_out {} {
- global c done
- set done {timed_out, EOF is not sticky}
- close $c
- }
- sendCommand "set caCert $caCert"
- sendCommand "set serverCert $serverCert"
- sendCommand "set clientCert $clientCert"
- sendCommand "set serverKey $serverKey"
- sendCommand "set clientKey $clientKey"
- sendCommand {
- set socket10_14_test_server [tls::socket \
- -certfile $serverCert \
- -cafile $caCert \
- -keyfile $serverKey \
- -server accept 2836]
- proc accept {s a p} {
- tls::handshake $s
- after 100 close $s
- }
- }
- set c [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- $remoteServerIP 2836]
- fileevent $c readable "count_up $c"
- set after_id [after 1000 timed_out]
- vwait done
- sendCommand {close $socket10_14_test_server}
- set done
-} {EOF is sticky}
-
-test tlsIo-11.13 {testing async write, async flush, async close} \
- {socket doTestsWithRemoteServer} {
- proc readit {s} {
- global count done
- set l [read $s]
- incr count [string length $l]
- if {[eof $s]} {
- close $s
- set done 1
- }
- }
- sendCommand "set caCert $caCert"
- sendCommand "set serverCert $serverCert"
- sendCommand "set clientCert $clientCert"
- sendCommand "set serverKey $serverKey"
- sendCommand "set clientKey $clientKey"
- sendCommand {
- set firstblock ""
- for {set i 0} {$i < 5} {incr i} {
- set firstblock "a$firstblock$firstblock"
- }
- set secondblock ""
- for {set i 0} {$i < 16} {incr i} {
- set secondblock "b$secondblock$secondblock"
- }
- set l [tls::socket \
- -certfile $serverCert \
- -cafile $caCert \
- -keyfile $serverKey \
- -server accept 2845]
- proc accept {s a p} {
- tls::handshake $s
- fconfigure $s -blocking 0 -translation lf -buffersize 16384 \
- -buffering line
- fileevent $s readable "readable $s"
- }
- proc readable {s} {
- set l [gets $s]
- fileevent $s readable {}
- after 1000 respond $s
- }
- proc respond {s} {
- global firstblock
- puts -nonewline $s $firstblock
- after 1000 writedata $s
- }
- proc writedata {s} {
- global secondblock
- puts -nonewline $s $secondblock
- close $s
- }
- }
- set s [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- $remoteServerIP 2845]
- fconfigure $s -blocking 0 -trans lf -buffering line
- set count 0
- puts $s hello
- fileevent $s readable "readit $s"
- set timer [after 10000 "set done timed_out"]
- vwait done
- after cancel $timer
- sendCommand {close $l}
- set count
-} 65566
-
-test tlsIo-12.1 {testing inheritance of server sockets} \
- {socket doTestsWithRemoteServer} {
- removeFile script1
- removeFile script2
-
- # Script1 is just a 10 second delay. If the server socket
- # is inherited, it will be held open for 10 seconds
-
- set f [open script1 w]
- puts $f {
- after 10000 exit
- vwait forever
- }
- close $f
-
- # Script2 creates the server socket, launches script1,
- # waits a second, and exits. The server socket will now
- # be closed unless script1 inherited it.
-
- set f [open script2 w]
- # puts $f [list set tcltest $::tcltest::tcltest]
- puts $f [list set tclsh [info nameofexecutable]]
- puts $f {
- package require tcltest
- package require tls
- }
- puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2828 \]"
- puts $f {
- proc accept { file addr port } {
- close $file
- }
- # exec $::tcltest::tcltest script1 &
- exec $tclsh script1 &
- close $f
- after 1000 exit
- vwait forever
- }
- close $f
-
- # Launch script2 and wait 5 seconds
-
- # exec $::tcltest::tcltest script2 &
- exec [info nameofexecutable] script2 &
- after 5000 { set ok_to_proceed 1 }
- vwait ok_to_proceed
-
- # If we can still connect to the server, the socket got inherited.
-
- if {[catch {tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- 127.0.0.1 2828} msg]} {
- set x {server socket was not inherited}
- } else {
- close $msg
- set x {server socket was inherited}
- }
-
- removeFile script1
- removeFile script2
- set x
-} {server socket was not inherited}
-
-test tlsIo-12.2 {testing inheritance of client sockets} \
- {socket doTestsWithRemoteServer} {
- removeFile script1
- removeFile script2
-
- # Script1 is just a 10 second delay. If the server socket
- # is inherited, it will be held open for 10 seconds
-
- set f [open script1 w]
- puts $f {
- after 10000 exit
- vwait forever
- }
- close $f
-
- # Script2 opens the client socket and writes to it. It then
- # launches script1 and exits. If the child process inherited the
- # client socket, the socket will still be open.
-
- set f [open script2 w]
- puts $f [list set tclsh [info nameofexecutable]]
- puts $f {
- package require tls
- }
- puts $f "set f \[tls::socket -certfile $clientCert -cafile $caCert -keyfile $clientKey 127.0.0.1 2829 \]"
- puts $f {
- exec $tclsh script1 &
- puts $f testing
- flush $f
- after 1000 exit
- vwait forever
- }
- close $f
-
- # Create the server socket
-
- set server [tls::socket \
- -certfile $serverCert -cafile $caCert -keyfile $serverKey \
- -server accept 2829]
- proc accept { file host port } {
-
- # When the client connects, establish the read handler
- global server
- close $server
- fileevent $file readable [list getdata $file]
- fconfigure $file -buffering line -blocking 0
- return
- }
- proc getdata { file } {
-
- # Read handler on the accepted socket.
- global x
- global failed
- set status [catch {read $file} data]
- if {$status != 0} {
- set x {read failed, error was $data}
- catch { close $file }
- } elseif {[string compare {} $data]} {
- } elseif {[fblocked $file]} {
- } elseif {[eof $file]} {
- if {$failed} {
- set x {client socket was inherited}
- } else {
- set x {client socket was not inherited}
- }
- catch { close $file }
- } else {
- set x {impossible case}
- catch { close $file }
- }
- return
- }
-
- # If the socket doesn't hit end-of-file in 5 seconds, the
- # script1 process must have inherited the client.
-
- set failed 0
- after 5000 [list set failed 1]
-
- # Launch the script2 process
-
- exec [info nameofexecutable] script2 &
-
- vwait x
- if {!$failed} {
- vwait failed
- }
- removeFile script1
- removeFile script2
- set x
-} {client socket was not inherited}
-
-test tlsIo-12.3 {testing inheritance of accepted sockets} \
- {empty socket doTestsWithRemoteServer} {
- # hangs on Linux
- removeFile script1
- removeFile script2
-
- set f [open script1 w]
- puts $f {
- after 10000 exit
- vwait forever
- }
- close $f
-
- set f [open script2 w]
- puts $f [list set tclsh [info nameofexecutable]]
- puts $f {
- package require tls
- }
- puts $f "catch {set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2930 \]}"
- puts $f {
- proc accept { file host port } {
- global tclsh
- puts $file {test data on socket}
- exec $tclsh script1 &
- after 1000 exit
- }
- catch {vwait forever}
- }
- close $f
-
- # Launch the script2 process and connect to it. See how long
- # the socket stays open
-
- exec [info nameofexecutable] script2 &
-
- after 1000 set ok_to_proceed 1
- vwait ok_to_proceed
-
- set f [tls::socket \
- -certfile $clientCert -cafile $caCert -keyfile $clientKey \
- 127.0.0.1 2930]
- fconfigure $f -buffering full -blocking 0
- fileevent $f readable [list getdata $f]
-
- # If the socket is still open after 5 seconds, the script1 process
- # must have inherited the accepted socket.
-
- set failed 0
- after 5000 set failed 1
-
- proc getdata { file } {
-
- # Read handler on the client socket.
- global x
- global failed
- set status [catch {read $file} data]
- if {$status != 0} {
- set x {read failed, error was $data}
- catch { close $file }
- } elseif {[string compare {} $data]} {
- } elseif {[fblocked $file]} {
- } elseif {[eof $file]} {
- if {$failed} {
- set x {accepted socket was inherited}
- } else {
- set x {accepted socket was not inherited}
- }
- catch { close $file }
- } else {
- set x {impossible case}
- catch { close $file }
- }
- return
- }
-
- vwait x
-
- removeFile script1
- removeFile script2
- set x
-} {accepted socket was not inherited}
-
-test tlsIo-13.1 {Testing use of shared socket between two threads} \
- {socket testthread} {
-
- removeFile script
- threadReap
-
- makeFile {
- package require tls
- set f [tls::socket -server accept 2828]
- proc accept {s a p} {
- fileevent $s readable [list echo $s]
- fconfigure $s -buffering line
- }
- proc echo {s} {
- global i
- set l [gets $s]
- if {[eof $s]} {
- global x
- close $s
- set x done
- } else {
- incr i
- puts $s $l
- }
- }
- set i 0
- vwait x
- close $f
-
- # thread cleans itself up.
- testthread exit
- } script
-
- # create a thread
- set serverthread [testthread create { source script } ]
- update
-
- after 1000
- set s [tls::socket 127.0.0.1 2828]
- fconfigure $s -buffering line
-
- catch {
- puts $s "hello"
- gets $s result
- }
- close $s
- update
-
- after 2000
- lappend result [threadReap]
-
- set result
-
-} {hello 1}
-
-# cleanup
-if {[string match sock* $commandSocket] == 1} {
- puts $commandSocket exit
- flush $commandSocket
-}
-catch {close $commandSocket}
-catch {close $remoteProcChan}
-::tcltest::cleanupTests
-flush stdout
-return
-